dell laptop 7 beeps no display । dell laptop 7 beeps on startup black screen

[@naf4494]

Excellent guuding If voltages name could be in 1-line explaining, that's would be a bonus for us

[@jeoffreytan3763]

Sir..dell inspiron 15 3521..no display with 7 low beeps just like a knock sound..pls advise

[@Tirkan]

VERY GOOD. RESPECT

[@YamiMTA]

Hello! I would like to ask you the following. I have the same problem as the video, after checking and see that I have the same results as you, remove the transistor and instead of 15v I have 10v, I still do not put a new transistor so I do not know the result. I would like to know some recommendations. Thanks and very good work!

[@Laptop_repair_zone]

You can replace a new N-channel mosfet or you can short with jumper wire.thanks.

[@YamiMTA]

@@Laptop_repair_zone I have turned to you again. After changing the UZ1 and effectively, it gives me current in the indicated terminals, which did not happen before. However, instead of giving me +15 volts like at 5:25, it gives me 9-10 Volts, and the error persists. In the + VCC_CORE (6:05) does not give me any voltage, it stays at 0. Do you think you could give me some indication of what else to check or review ?. Greetings and good work.

[@md.saifulislam9155]

@@Laptop_repair_zone kindly make a video on how to short with jumper wire

[@DARKVRS]

dell 3531 beep 7 LA-B481p

[@starmakervideos1984]

Thanks so much brother.

[@DEvoUT4EvA]

Thank you so much, God bless you.

[@Laptop_repair_zone]

Thanks for your comment. please share my videos and channel.

[@md.saifulislam9155]

Every desktop, laptop motherboard has this 8 feet thing that looks like switching mosfet. Even graphics card board has it. Can I just get one from a motherboard and place on my Dell motherboard? Will it work?

[@Laptop_repair_zone]

Just replace a N-channel MOSFET thanks.

[@mandarpatil9434]

Sir, plz tell me what is the cost of this work you took from customer.

[@leolearning3048]

Hi. QZ1 and QZ7 only 0.71 voltages. Also power led is on. No fan .no display. What should I check?

[@jimhoangvuofficial6488]

THANK YOU SO MUCH

[@rajeevsharma1842]

On my borad uz1 show 11.32 v instead 15 as shown. One other legs it show 1.5. No voltage on pl 701 and pl700

[@ultrashock3202]

Hi, have same matherboard bat is going on 3sec and off all the voltage i have check and they are right whats the problem samone know;/? Super IO?.

[@ritiksoni5830]

Sir instead of 15v there is only 11.25v showing (uz1) please advice me 🙏🙏

[@Laptop_repair_zone]

thanks for your comment, 11.25v its good enough,check +1.5VS is present or not,and follow the schematic diagram.

[@wisdomugochukwu7742]

same to my board, i just chnage the capacitor and resistor close to uz1 and boom it display and vcc core power was present

[@manuelcedillo854]

Value resistence please friend@@wisdomugochukwu7742

[@manuelcedillo854]

Value resistence uz20

[@ernestogonzalez194]

Hello there, I have around +7V in +VCCP, not +1V as you're...Should I replace PL500?, thank you in advanced!!

[@ernestogonzalez194]

+VCC_CORE also Not Present, all other voltages are ok, what should I replace for those two voltages not present, Thank You!!

[@Laptop_repair_zone]

Thanks for your comment, please reflow or change PU500.

[@Laptop_repair_zone]

Please join our Facebook group.

[@ernestogonzalez194]

@@Laptop_repair_zone already did, thank you so much!!

[@maccybersibs]

hie i have the same problem with the same motherboard you have fixed mine the +Vcc voltage is available everything is okay but its having 7 beeps no display can you assist me on that

[@md.saifulislam9155]

What is the name of the chip that you removed? What should I tell at Hardware store?

[@Laptop_repair_zone]

It’s a switching MOSFET .

[@natty3109]

where do i get the chip you change

[@AbdoAbdo-cx6to]

شكرا لك

[@georgekaramolegos]

Really great video. I followed all the way till u search for the voltages . The voltages on uz1 show ok... what can i do next ?

[@Laptop_repair_zone]

thanks for your comment, please follow the schematic diagram.

[@olabanjioyeyemi8997]

Please I have the same issue with my laptop. How do I contact you to resolve this issue?

[@techparistech2659]

Hello I am facing the same problem GFX CORE missing any Points to check

[@Laptop_repair_zone]

thanks for your comment.check +VCCSAP if present then check. +1.5VS ,+1.5V_CPU_VDDQ pu700. +1.5VS ,+1.5V_CPU_VDDQ

[@faisalk2245]

Tnx sir

[@Laptop_repair_zone]

Thanks for your comment.

[@mecyanned]

On my dell inspiron 5458, removing the battery and putting it back fixed this, this happens when i press the keyboard too hard

[@EdsonLemos-wc6se]

ola ... minha medicao esta dando errado no mosfet 6644

[@ranforandi678]

Hello Sir, I have an alienware 14 with the same problem ( 7beeps) but I can't find the UZ1 chip, any advice ?

[@Laptop_repair_zone]

Thanks for your comment, alienware 14 and dell inspiron 15 not same motherboard you need to check all the required voltage step by step.

[@ranforandi678]

@@Laptop_repair_zone do you maybe know which one is for the VCC Core on the alienware 14 main board?

[@sajidmahajan4557]

Sir my dell 3521 beeps 7 times on battery, but works normally on charger

[@Laptop_repair_zone]

Thanks for your comment.check all the voltage with battery.

[@manuelcedillo854]

what is the value of the resistance uz20@@Laptop_repair_zone

[@manoharune6381]

Hi, I have Dell 3537 with the same problem, 7 Beeps, one laptop repairer told me to change motherboard, plz give me some suggestions.

[@Laptop_repair_zone]

you can follow this video.

[@hasankaperera771]

Thanks Would you please help me dell 3 beep code fix

[@missoumsoft107]

help me i found 0V in PL600 and 0V in PL700, where is the problem

[@thusithaliyanage8754]

Best

[@hafizmuhammadabdullah68]

Sir g cost?

[@panjipanji4012]

My laptop, firstly 5 beeps and no screen display. And one day, i cleaned RAM. Than I turn on my laptop give me 7 beeps and no screen display. I try turn on and than off about 5 times. My laptop was succesfully boot without beeps sound

[@almooalyalmooaly5703]

so thanks

[@md.saifulislam9155]

The switching mosfet in UZ1 has label on it but it's so small and scratched that I can't read. Can anyone help me with it?

[@Tirkan]

SI4634DY bro

[@md.saifulislam9155]

@@Tirkan Thanks. I removed the mosfet in UZ1 and motherboard is not making sound anymore. Cooling fan is working. Battery is charging but no display. My friend said that I must find exact mosfet to replace. Can I just get any mosfet that looks like it and place it? Will it work?

[@md.saifulislam9155]

@@Tirkan motherboards and graphics cards have mosfet that looks like the one I removed from UZ1. can I try with any one or it have to be exactly same? I really don't know where to find this.

[@Tirkan]

You have eBay?

[@Tirkan]

You Must put the Same mosfet. If you found from another motherboard you can take it

[@jayant2159]

Isn't the motherboard is same in Acer e1531 🤔

[@manuelcedillo854]

You can replace uz1 with 4430 helo me

[@abhishekdas149]

In PL500 it is showing only 0.46 but in your multimeter it is showing 1.06

[@Laptop_repair_zone]

thanks for your comment, check or change pu500.

[@natty3109]

please i need your help its the only laptop i have

[@vishnuam1291]

What will it costs?

[@justbesimple007]

For normal people it costs Around ₹2000 to ₹3000 at work shop. But for technician it costs only ₹500/-

[@godwinwilliams2970]

Pls provide sound on your content

[@Laptop_repair_zone]

Thanks for your comment

[@gomrinadjib1495]

hallo i remove UZ1 but i don't find 15 V what is solition plz ?

[@Laptop_repair_zone]

Thanks for your comment, please check out Dell inspiron 3521 LA-9104P no display, solved. kzbin.info/www/bejne/eXfGY5l9ea-Xbq8

[@خالدابوالهيجاء-ث1ل]

What is the reason for five beeps for the same motherboard

[@Laptop_repair_zone]

Thanks for your comment. 5 beeps CIMOS battery, check your CIMOS battery.

[@midodido1941]

thank you sir

[@abhishekdas149]

+VCCSAP is showing zero... Where might be the error

[@Laptop_repair_zone]

thanks for your comment,check pu600.

[@rajeevsharma1842]

No voltage on PU700

[@dutunudutu7006]

in my case heat up the processor do the job

[@lazirirabah9123]

NO

[@basicgardeninghd]

no voice

[@Laptop_repair_zone]

Thanks for your comment.

[@abumohammed4168]

Thanks sir

[@Laptop_repair_zone]

Thanks for your comment.

[@rajeevsharma1842]

No voltage on pu 700

[@gangagrgsn4328]

Thankyou 🙏

[@Chanakaicdl]

Thank you . . .