DeLonghi ECAM Fully Automatic Coffee Machine Restoration | DeLonghi Repair and Restoration

[@KUBAXUgames]

World will be better with specialist like you ! Keep going don’t stop.

[@Vladynko1]

Thanks for the great video. I like Delonghi, ECAM and ESAM, I think these are currently the best and easiest serviceable coffee machines. Simple construction without unnecessary complications. All parts and components are well accessible and easy to replace. In 5 years I serviced them and repaired about 10 pieces. I have exactly the same Delonghi at home. It works for 6 years without failure. Sincerely.

[@yt.myworks]

Thank you for the nice words. I also love to disassemble and repair the Delonghi coffee machines. Very simple and brilliant technology and above that, the parts are not overpriced.

[@TheFartleberry]

Really helpful, thank you! I’ve used this video a few times to help disassemble my machine to replace the o-rings over the last few years, wouldn’t have been able to do it without your video!

[@toshirotanaka3568]

Super. Dzięki Twojemu filmowi udało mi się wyczyścić również mój ekspres, krok po kroku. Po złożeniu zostało mi co prawda chyba z osiem śrubek jak u ruskiego zegarmistrza, ale wszystko działa. Bardzo dziękuję za te filmy.

[@vasatko1978]

Vždy zůstane šroubek 🙂

[@henrikmartens7693]

When you polished the plastic cabinet I thought; - that´s taking it a bit far but you took it a step further when you touched up with the liquid chrome marker and I now see the end result as a brand new machine.. - Amazing.. At the moment I´m in the middle of a decision process of getting myself a Delonghi ECAM22110B. You did a good job on this one!

[@RyanSmith-pf7ci]

I just did what I thought was a "deep clean" on my Magnifica S this weekend. I should have watched this first!

[@АлександрПетросян-ю1и]

Thank you,Master!!!You have gold hands!

[@the-._.-unknown]

Great video, I love your patience and attention to detail, well worth seeing the video. I have cleaned my coffe machine before but never a full clean like this including all the major parts.

[@Viena-qrirwn3jjvgggvjm]

Sarıkamış'ta sözlük anlamı

[@Viena-qrirwn3jjvgggvjm]

Dhghffhj

[@Viena-qrirwn3jjvgggvjm]

Dvnbxd

[@nikolasp3665]

Thanks for the video. cleaning the grinding repaired my machine! there was a small piece of wood in it. amazing how this came in.

[@bandita84]

For me, my profession is servicing in other fields, but your job is excellent, it seems that you are immersing yourself in the task and reaching the production standard of quality. If all professionals worked this way, they could safely buy used machines, there would be no disappointment. Keep your good habit, sooner or later there will only be a need for such work.

[@yt.myworks]

Thank you very much for this inspiring comment! I will continue with youtube and improove myself always on.

[@Eightfinger]

Thank you. Your video really helped me to disassemble my coffee mashine and clean it properly! Without it, I would have never figured out how to do it without breaking something!

[@leachimusable]

Sehr gut erklärt, danke. Das kommt richtig. Habe zwar eine neue, aber Reinigen sollte man diese schon turnusmäßig. Die DeLonghi Maschinen sind einfach Klasse in Punkto auseinander bauen und das man für alles Ersatz bekommt.

[@sophiehoogenbosch7786]

Thank you for the detailed video. Because of you, I was able to repare my machine all by myself! Keep up the good work.

[@jenko7204]

Thanks very muck for making this video. I've always decayed when needed, but had not taken the machine apart before. I was shocked how back it was. Not anymore though. Anyone with a coffee machine should watch videos of their model like yours. Cheers.

[@lighttan4042]

I'm blown away by the precision. Just simply amazing work. Particularly how you removed the scratches from the plastic. I had no idea it was possible. May I ask, can you clarify the process a bit more. What you use to sand it down and the polisher etc... Thanks.

[@9vmarcus]

in my country they would tell you that you have golden hands.... very good job..looking at your work is relaxation for me 👏👏👏👍👍👍

[@herensugue]

I got a Delonghi Magnifica ESAM 4000b in pretty much the same state. Nice job!

[@mickeytee6533]

This helped me a lot. Thank you. I had to replace the frothing control on my Magnifica S and although not exactly the same... this helped me know which parts to disassemble.

[@pascalmuhlebach695]

Finde das super das man ne alte Kaffe Maschine reparieren kann

[@robertjaszewski3568]

Brawo! Instruktaż i precyzja wysokich lotów. Super odcinek i czekam na inne modele. Powodzonka

[@10lucianb]

I have whatch the video all You are the Best You have aloot of patience

[@Sonic312624]

Respekt. Sehr gutes Video. Toller Job. Handwerklich sehr begabt. Das kann nicht jeder. 👍👍👍

[@ukaszdabrowski732]

Great video and awesome machine! I did the same with my Delonghi ecam 23.420.SB after 17600 cups. It's still working perfectly. In my machine the infuser guide (small plastic thing that pushes on the lever of infuser) was broken so I 3D printed it. Anyway, great video! I was looking for something like that when I was renovating mine but without success.

[@yt.myworks]

Thank you for the nice words! The idea of the 3D printed infuser guide is genius. LG myworks

[@danielnelva134]

I do not dare to disassemble my machine but I think I could have a similar problem with the infuser guide: the piston is not pushed to the top after brewing therefore some coffe ground remains inside and is not wiped off (I have to remove it manually otherwise the next coffee is awful...) Do you think this could be due to the same piece you 3D printed?

[@ukaszdabrowski732]

@@danielnelva134 I had the same problem. Printing this part helped. You can easly check if your part is broken by looking inside infuser doors on the right side. Its small guide looking part.

[@ducipal1st]

@@danielnelva134 Recently purchased for 45 euros ECAM23.420 with the same "fault", otherwise in very good condition, 10 minutes fix, you have to adjust the infuser/piston to the home position, now the piston goes all the way up. Very good coffee machine.

[@bikebouwer]

Great job! thanx for your videos! I allready did the same thing with 2 defective machines i recently purchased. If i may give you a tip: you also can give a watertank with limescale a vinegar bath for a few hours or even overnight, to get it completely clean. keep up the good work!

[@godwinfriday-eb9ho]

Please where can one purchase a water tank

[@bob1748]

excellent, a great help coffee machine back to working like new after following this video. Many thanks, keep up the good work

[@Oscar-if6lq]

Awesome video, I love the attention to detail. I'm amazed you got all these parts for just 40 Euros. Here in the UK parts for these machines are fairly expensive and I don't think it would be economically viable to replace all the parts you did in this machine.

[@ZofSvarna]

I have just done a servicing job on my machine similar in scope to this and everything, including the equipment I needed to fix it cost £130. I purchased some things from Europe. Since my machine costs £550 new, it was still worth it and now I have equipment for the future. Just don't buy o-rings from 4DeLonghi, that is daylight robbery.

[@davelee-00]

Took mine apart because there was no flow to the milk frother or hot water. Coffee came out without a problem. Turned out the outlet from the steamer was blocked. Cleared with a pin. Shame I didn't try that before taking it apart . 😡

[@mstockma]

Thanks for the great video! It helped me get the infuser put back together after an imperfect reinstall. When I did it myself, something broke and now I have to figure out what the tiny piece is (looks like the regulator, but it is not)! Your video helped me get the arms positioned correctly, but now I think the broken piece is causing it to not clear the pucks. Deeper into youtube I go!

[@tomaszbanach7136]

Great work. Very good movie. Thank you for your help, thanks to you my coffee machine works great again 🍻😉☕️

[@jirituron9084]

Thanks a lot! Great video which created my delonghi repair more easier and now work perfectly again! Thanks!

[@justinvantreese3726]

So you're like My Mechanics but for coffee machines. Nice :D

[@TheKonstantinius]

State of Art. Polished body was the last drop, but then I saw chrome marker. Hat off

[@Geemeel1]

I bought a brand new one for 300 Euro! and I cant still operate it.🙃.. Wow... amazing to see how you did this #respect X

[@yt.myworks]

Thanks for the great words 😉

[@jozsefmihaly9381]

Gratulálok,szép munka!

[@mudiqbal]

Impressive. Good Work

[@olifko]

Amazing job 👍

[@roundtheloopandback]

Exactly what I was looking for !!

[@4tech404]

Just did the deep clean because the general warning light was on. I have no idea how the hell would it know if it's dirty "inside". Anyway, I hope it works . Will reassemble it tomorow. Either way , I learned something today from you, thanks. :)

[@4tech404]

Lol, It actually worked.Not the cleaning per say, but the wire to the press motor didn't had a good connection.

[@audrey3297]

J'aime votre maîtrise! Bravo! Et merciiiiiiiii!!!

[@johnbontzouklis7571]

Just replaced the flash boiler in my ECAM45760. I will also do a maintenance clean like this, thank you!

[@waldek2030]

Mega praca wykonana !!!

[@henrikbocarlsen]

Lubricate all orings before they are mounted….their seal is obtained by small movement in the groove….lubrication prevents wear and secure their primary function….

[@_w_w_]

Amazing job! When you use ultrasonic bath to clean those parts, and then resurfaced the plastic, you had me convinced do you are a serious pro at this. Did you work for DeLonghi or one of one of their repair shops? The familiarity you have with the parts of this machine is really detailed.

[@yt.myworks]

Thanks for the nice compliments! But everything I have taught myself.

[@_w_w_]

@@yt.myworks As another engineer/tinkerer, your skills and setup are truly impressive!

[@bellastoria84]

You have done a great job! Could you kindly specify which grease did you use in each section? I see the product in the description But I don't know which is use when.... Thanks

[@KittySneeze]

Yes I have the same question. What lubricant was used on the o-rings on the infuser?

[@romanprochazka6146]

Good work!

[@elhadibouasria3984]

Great work. Simple and clear. Thanks a lot....

[@진실을찾아서서]

you are supermen.... It's super... perfect ASMR...~ REPAIR ARTIST~!

[@yt.myworks]

Thank you!😉

[@chimcray6718]

Bravo ! Very helpful. My Delonghi could not run coffee out of spouts, instead the water comes underneath to the coffee grind container. Any idea where the problem is ? I am trying to disassemble the machine. Cheers.

[@yt.myworks]

In most cases the brewing flask is leaking: kzbin.info/www/bejne/aYKlfaKKgsyHm8U

[@BFPianokeys]

This is great video...but it doesn't show how to take out the tiny cream valve on top of infuser (under infuser filter). It is gold colored when laying on your towel, to the right of the puck removal arm.

[@yt.myworks]

You're right, but it's in my other video kzbin.info/www/bejne/Y3OzeHivjJqFjKMsi=ptn-sbLW3RRy0ZE5

[@arash-media]

amazing! keep going

[@Stefatabor]

Ciekawe ile by taki przegląd kosztował w serwisie . Super filmik .

[@paolosacchetti4688]

Thank you Bro Your video has been very precious 💯

[@beppebranchetti4286]

Good work!.

[@lifeisfuneh]

Wow! you take it to the next level! :) Now how about direct tap water connection kit? That would sell like hotcakes! :)

[@holgerreimer8321]

Ich ärgere mich immer mehr, dass ich meine Ecam Cappuccino zur Verwertung verkauft habe. Es macht so einen Spaß Dir zuzusehen und das hätte ich mit meiner alten Maschine auch machen sollen. Zugégeben meine neue Magnifica S ist schick aber eben keine Cappuccino.

[@gregvelo3176]

What part would you replace if both coffee and water (in the initial and final rinse ) doesn’t come out? I get error like when coffee is too fine grinded. Thanks, this is very helpful. Great video , you are a king!

[@yt.myworks]

I would fix the water pump first -> this video will show you how: kzbin.info/www/bejne/b6GZZpdjgtehrcU

[@doktorkrol]

Good work

[@utevender4689]

Hammer 👍

[@АлексейПетров-х6ф8ц]

Как говорится не бита не крашена ))

[@garevac]

Bravo! I have same coffe machine.

[@tharun]

Thank you for this video, please could I ask what screwdriver head you need to remove the tiny screws from the back (the first removing cover step you showed). Thanks

[@yt.myworks]

You need a Torx 20 "BO" screwdriver with a bohre that can slide over the pin.

[@10lucianb]

You are sick Man!!!!

[@silver152]

Wonderful great video 👍

[@ZofSvarna]

Hello, I am in the middle of restoring an approx. 7 years old DeLonghi Magnifica S Cappuccino (ECAM22.360.S). It wasn't in a horrible state but upon taking it apart thanks to your instructions, we have found that both the infuser and the piston were very dirty and the piston was retaining and leaking water. I am awaiting the delivery of spare O-rings I ordered to replace the old ones and have already cleaned everything I possibly could. We are also planning multiple descaling sessions to make sure the system is clean and if any other issues are found, at least we know that this isn't the issue. Your videos have been instrumental to us being able to do this so thank you very much for making them available to us! I have two questions for you: 1) There is a mushroom valve in the piston (can be seen at 9:15 in the video), from which I am missing the silicone spacer within the spring (the mushroom head itself is still on the spring, just very compressed and will need changing). Do you know how I could replace this spacer (e.g. small silicone pin or similar)? Is it vital to the function of the piston or can it be omitted? Do DeLonghi even sell the whole valve at all at this point? (I am in the UK for context, I am happy to order from the EU if needs be/if you know a good source) EDIT: I have just realised that one of the piston springs is also cracked. Are any of these available anywhere? 2) Do you think it's worthwhile to take apart the transmission at this point, or should it be left until more significant issues occur with it? It seems to be dirty and needing some grease, but the machine still works, even before we took it apart, it just wasn't at its best due to the issues I wrote about above. Are transmissions in these machines a huge problem?

[@yt.myworks]

Hello, I order a lot from these online shops: juraprofi.de or komtra.de. You can get the two springs on eBay, for example: www.ebay.de/itm/2-stueck-Pressure-springs-for-den-Bruehkolben-DeLonghi-ECAM-ETAM-Kaffeevollautomaten-/324834160850?mkcid=16&mkevt=1&_trksid =p2349624.m46890.l49286&mkrid=707-127634-2357-0. You can also use a piece of silicone tubing to replace the white spacer. If the transmission still works then you can leave it in. This never causes problems if the spindle has been greased regularly. Good luck with the repair!!

[@ZofSvarna]

@@yt.myworks Hello, I'm sorry I missed your reply! Thank you very much for the links, I have actually ordered from the eBay seller and he delivered everything promptly. As far as the spacer, I have ended up ordering the whole spring but I will try to find some tubing for future repairs. The transmission, as far as I know, has not been greased at all over those years, but I will try to grease it from now on and hopefully it will be OK. I will report results soon. If not, I will refer to your vidoes for help :)

[@ZofSvarna]

@@yt.myworks Hello, after full reassembly (I discovered a deformed o-ring within the raccord hose connector as per your other video, which I replaced), testing, descaling, and some tweaking of the grinder, I can happily report that the mechanism sounds smooth, the grinder gives 10g of grounds for extra-strong, the infuser makes rounded pucks of coffee, there is no water in the grounds container or in the red reservoir under the tray, and the machine pumps out 37ml of coffee at 90degC for one short that tastes just like the bean. Having replaced the O-rings in the steam vent, it also dispenses lovely smooth milk foam without sputtering. Other than some limescale that is still floating about in the system, I'm happy to report that the machine seems to be fixed up to standard again! Thank you once again for your fantastic videos, I wouldn't have been able to fix it without you! I learned something new and can now drink some nice coffee again so 10/10 😊

[@cassilver1]

Great Video! Thanks a lot

[@natanelelkutski9966]

Thanks for sharing this video; you did a fantastic job!. Maybe you could help me understand something im struggling with I have a problem with my Delonghi Dinamica. After accidentally adding 2 cups of pre-ground coffee, the water doesn't come out anymore. I tried to take apart the machine, but I didn't find the issue, so I gave up and wanted to take it to service. However, when I put everything together again, I failed to see where the little spring with the 2 small silicon pieces on your top right at 9:46 should be. Can you please try to explain or show where it should be? Thank you very much in advance!

[@EsenbekAliev_]

Did you use special tool to remove back star screws? They seem to have a center piece that

[@yt.myworks]

You need a TX20 Torx (Torx with Hole)

[@donglasgow5236]

Great video! I have replaced my diffuser (behind the door and water tank) and the valve assembly (the part with 5 tubes attached), but still my machine will not pump water through. When I remove the supply tube from the valve assembly, it will pump water through the open tube. Is it possible the pump cannot generate enough pressure and needs to be replaced? I would also replaced the nearby regulator just in case? Any other thoughts appreciated. Thanks.

[@dollypointner9478]

I would try to replace the generator - you could try cleaning it first.

[@martinwhittle7801]

Great video, with the part removed at 08:23 do you have any more detail for rebuilding it? Have a small 2 part plastic transparent bit with a spring that I think goes under the part where the washer sits as an oblong/oval shape. Can't get it to go back in, unless it doesn't go there?

[@yt.myworks]

I will make a detailed video of the part. Can you send me pictures? Maybe I can help you.

[@martinwhittle7801]

@@yt.myworks thanks but I've fixed it now. It went in the other hole next to the one I was trying to fit it in. Machine is working great 👍

[@alexandergonchiy1298]

Could you please share the photo? I can't seem to find the right spot.

[@LegaliseIntellect]

When I've opened the grinder at the top it resulted in a small spring and bearing ball falling off could you tell me where does it fit? Thx

[@yt.myworks]

Hello, watch my other video kzbin.info/www/bejne/epybkJyaad1qe5Y

[@LegaliseIntellect]

@@yt.myworks thx, the pieces that i found was from some other appliance, because in order to get all the beans out of the grinder I've flipped the machine... Now it works. I'm in Italy and coffee is a must.

[@g.e.8915]

I had one from a friend who looked to scrap it .Doesn't work of course but i will try to fix it. The engineer told is ERROR message on the electrical .I looked to diffuser and the rings are worn but with some life in them.What silicone you use for rings? Is a great video and I hope to fix my espresso machine too.

[@yt.myworks]

I use OKS 1110 silicone. Good luck with the repair.

[@METTI1986LA]

Incredible… but I guess a repair like that would cost atleast double the price of the original 😅 or even more

[@yt.myworks]

In my region the spare parts are not that expensive.

[@METTI1986LA]

@@yt.myworks I mean your time … if you have to calculate your hours you would probably cost 60- 100 euros per hour!

[@yt.myworks]

I'm not that expensive 😉

[@HilalMalakha]

Do you repair delonghi esam04110b

[@bobmcfc]

Great video. My grinder was jammed so got that fixed by cleaning it. The coffee is weak and now it is not making pucks and the grounds are wet and coarse. Any ideas?

[@yt.myworks]

Hello, here is my other video about grinder: kzbin.info/www/bejne/epybkJyaad1qe5Y In the second half of the movie you can see how the grinder can be set.

[@bobmcfc]

@@yt.myworks all working now thanks to you!

[@shanewilson2152]

A job well done👍

[@rogerd4642]

Thank you for this outstanding video. What is the most likely cause of excessive water dripping into the very small red "tray" in the front of the machine, visible when you slide out the grounds drawer? Thanks in advance for your help!

[@yt.myworks]

Is the water dripping next to it? If so, then the expansion chamber is probably very dirty and should be cleaned. This is the black cover over the heater on the left side of the machine.

[@bart8419]

An artist

[@RoyAlexander]

Very useful thanks

[@ersanmehmet4398]

Many thanks for sharing such excellent videos the issue I have have when I turn the machine off the infuser is in the correct position for extracting but the two levers are in the wrong position I'm manually moving those with my fingers to get the brew unit out the other issue is the pox aren't being ejected and they build up in the infuser and then block and coffee won't come out any ideas on how to repair this fix your help is very much appreciated

[@yt.myworks]

There are two possible causes for this problem, either the brew group was assembled incorrectly or the lever on the machine broke off. Here is my other video how to properly assemble the brew group: kzbin.info/www/bejne/jaTJepyaoceZe9U

[@ersanmehmet4398]

Many thanks for your help the leaver is missing

[@patriciacontis6933]

Très bonne vidéo merci ! A 6.37' on ne voit pas où réinsérer petit ressort et petit truc 😭quelqu'un pour m'aider ?

[@yt.myworks]

Voir mon autre vidéo, c'est un peu plus précis : kzbin.info/www/bejne/jaTJepyaoceZe9U

[@patriciacontis6933]

Merci vraiment d'avoir pris le temps de me répondre. J'ai pu grâce à vous refaire fonctionner mon broyeur Delonghi 😍😍😍

[@tatew.6564]

I just replaced the generator using your excellent video. However, it now leaks from every one of the hose insertions where I placed the small hoses. They are properly seated in the hole, and the brass ring is captured by the clips in every spot. Any ideas on what could be the problem? My original symptom was that instead of making a cup of coffee, water would just pour down inside the drain.

[@yt.myworks]

With generator is meant brew unit piston? Did you use new o-rings? The seals should be lightly greased with silicone grease.

[@ducipal1st]

Hi, thank you for the detailed instruction of the machine restoration. When I work on a coffee machine I like to do proper job, as you, but as business, there is no time for a such comprehensive job, when you have 10 calls/day....by the way, I like your washing thing, can you tell me the brand? I want something like that for small cleaning parts. Thanks

[@yt.myworks]

Thanks for the great words! I have a cheap ultrasonic cleaner "Medion" from the discounter. For professional use, I recommend to spend more money to get better cleaning results.

[@ranyrubim1411]

Você está de parabéns! Profissional excelente!. Minha cafeteira apresentou problema, infelizmente. A alguns dias mostrava no painel a mensagem de inserir infusor. Entao eu fiz a limpeza e manutenção dele, mas nao adiantou muito. Agora persiste em dizer "alarme genérico" nao faço a minima ideia do que seja. Voce saberia me dizer o que pode ser e como posso proceder?

[@yt.myworks]

Hello, I think that the transmission is already worn out and the brewing group cannot find the right position. There is already a repair video from me about this problem. Unfortunately, the repair is quite time-consuming as you have to dismantle almost the entire machine. The transmission can also be replaced with a new one. There will be a new video on the topic next week. kzbin.info/www/bejne/fouboISLfNmDoMU

[@ranyrubim1411]

@@yt.myworks obrigado. Fico triste por saber que o problema é demorado e delicado. Tenho muita dificuldade em fazer reparos complexos. Irei assistir o seu vídeo algumas vezes para tentar fazer corretamente o reparo.

[@marcoippolito7627]

Bravissimo

[@heima1299]

Tipp zum Reinigen des Siebes der Brühgruppe, und vieler anderer Teile: in Waschpulverlösung einlegen, das Sieb sieht nach zwei Stunden aus wie neu. Ansonsten gute Arbeit.

[@yt.myworks]

Den Waschpulver habe ich noch nicht ausprobiert, danke für den Tipp! Ich verwende Waschsoda ich denke die Ergebnisse werden ähnlich ausfallen.

[@sinashahidi8697]

Hi, thanks for the great video. Is that silicon grease you used on the o-rings at 5:49?

[@heima1299]

Die Kunststoffteile polierst du ja hervorragend. Warum machst du das nicht auch mit der Edelstahl Tassenablage?

[@yt.myworks]

Hei Ma: Danke! Das Metall zu polieren ist schon mal eine andere Liga. Erfordert viele Stunden mühsame Arbeit. Ein neues Abtropfblech bekomme ich für ca. 7,-€ 😉

[@1976tubero]

Mit welche mittel hast du die kunstoffteile poliert? Bis jetzt habe ich immer neu gekauft.? Sg

[@yt.myworks]

@@1976tubero : Früher habe ich auch alles neu gekauft bis ich auf die Idee mit dem Polieren kam. Du musst nur auf die Schriftzüge achten! Das verchromte "DeLonghi" Logo ist sofort ab. Zum polieren nehme ich "Menzerna" (siehe Videobeschreibung).

[@cristianmaftei5269]

Very helpful video. Thank you for posting. I hope it will help me as well. My machine is no longer frothing well. The pressure coming out of the frother is very uneven; it fluctuates and goes up and down and it's very weak. Even when set to water only, it barely poors water but I otherwise don't think it's a pump issue since it still looks like it poors a normal coffee; it's just having problems when it goes on the frother side. Any idea what could it be? Hoping it's valve issue.

[@yt.myworks]

Hello, before you take the machine apart, try to descale it properly. One or two times in a row. Perhaps then the nozzle is free.

[@EvansMutai]

Brilliant video and super informative! I have an ECAM250.33 TB it suddenly just wont go into "ready mode". I turn it on, all the lights flash for a long time, about 2 minutes. Then machine gives up and just shows a steady alarm triangle light. Do you know how i might try reset the machine before doing such a tear down for a deep clean up? or any other ideas of what the issue is? I tried cutting out power in the back, then turn back on and same issue. Thanks!

[@yt.myworks]

How old is the machine and how many coffees have been made?

[@EvansMutai]

@@yt.myworks just 1.5 years, at about 2 coffees a day that's just about 1000 coffees

[@yt.myworks]

@@EvansMutai This is very strange, this error often appears on older machines as they wear out. For some reason the brew group cannot find the home position. This can have many causes, for example one of the microswitches is broken or the hall sensor. Maybe the inside of the coffee machine is dirty!? Try to reset and then thoroughly clean the inside of the machine.

[@EvansMutai]

@@yt.myworks thanks for the insight. Ok will give it another thorough cleanup. How do i reset the machine?

[@yt.myworks]

@@EvansMutai Simultaneously press the "On/Off", "One cup" and "Two cups" buttons while plugging the fully automatic machine back into the socket. Release the buttons when the one-cup, two-cup and steam indicators flash simultaneously. The DeLonghi coffee machine then performs the reset.

[@danielnelva134]

Great video, thank you!

[@Freedom89984]

Very nice job, great cleaning and video skills. I repaired mine several times, but never took it totally apart. I have a question. I am repairing this machine for a friend. The problem is that the elevator is not coming to the down position, ready to make coffee. It stops in the middle and I get the error symbol. Sometimes he makes it to the bottom, and you can get a cup of coffee. Do you know what could be the problem and how to fix this? By the way, did you know that if the thermoblock stops working, it is probably the heat fuse that is broken. Small cheap part that’s soldered to the thermoblock.

[@yt.myworks]

Thanks for the great words. I haven't had this bug yet. I recommend running a test mode so you can see if all microswitches are working properly.

[@Freedom89984]

@@yt.myworks thanks for the advice, I will do that. Maybe this is a nice project to do the same maintenance as you showed in the video. I never took one totally apart.

[@philje123]

If the brewing unit moves up and then back down to the middle position with the warning light then it's either the micro switch on at the top or the reed sensor on the transmission. The machine can't detect that the brewing unit is there (isn't pressing the switch at the top) or the values from the transmission sensor don't match those of the switches being pressed.

[@yecsar]

Exellent video thanks

[@Sir_JOga]

Nice Job ✌️

[@touggourt]

Hi I've fixed my delonghi Ecam (similar to one in your video) by putting a new thermal fuses and now waking fine but when putting the milk frother and trying to make cappuccino it tells me "Turn Froth Dial on",I cleaned the frother and turned the froth dial left and right but still the same message comes up, any ideas? Thanks

[@yt.myworks]

It could be that the micro switch is not working properly. Check the small switch on the connector from the milk container.

[@LaLaLand1980]

👏🏾 great job. I have a problem with my Delonghi Dinamica plus. Ecam 370.95.T the device gave a short circuit when switched on. do you have a video for that. replace the motherboard?

[@yt.myworks]

Check if there is a leak inside the machine. That could cause the short circuit.

[@xxpeterxpanxx]

You are Awesome! Excellent work, very professional and organized! I have a ECAM350.35.W (3 years old) and it needs to be repaired (mechanical problem and also a valve problem) and they want to charge me 230 euros to fix it. I intend to fix it myself (I hope to be successful). Can I ask you any tip that can help me go forward with it? Thank you very much in advanced!

[@yt.myworks]

Thanks for the great words. If I can, I'll be happy to help.

[@mikeygee2007]

Great video. I have a ECAM23 460.s which is very similar to this machine. The hot water has stopped running through the spout and therefore the throth maker. Do you have any idea what it could be? I've tried to take the spout out to clean but its not easy. Thanks

[@yt.myworks]

It could be that one of the solenoid valves is no longer working properly.

[@jurgengalea7829]

In 5:54 how did you take out the 'cream valve' please? Thanks for a very informative video!

[@yt.myworks]

See my other video from minute 4.15: kzbin.info/www/bejne/Y3OzeHivjJqFjKM

[@jurgengalea7829]

@@yt.myworks thank you so much!

[@lukasnew]

I've replaced this knob few minutes ago and now I think that it is not necessary to disassemble any part of the coffee machine. Just try to pull it very hard. I hope I've helped.

[@christianeberle1905]

Endlich mal ein super Video auf dem man auch alle Details sieht. (fast). Kann jemand sagen wie herum die Feder in die obere Brühgruppe eingelegt wird? (Video 9:46, rechts oben die Feder mit dem Kunststoffnippel oben dran). Vermutlich der Kunststoff-Kopf nach oben Richtung ovalem Teil...

[@yt.myworks]

Nach oben ist richtig 😉

[@jimbob6290]

Hi. Great video. Very detailed however i couldnt spot the spring that broke on mine. Its a Retuning Action Lever Spring with hooks on either end. One has snapped. Any idea of where it could have been. It was hanging just above the "bin drawer". Thanks in advance

[@yt.myworks]

watch my other detailed video and you will definitely find what you are looking for ;-) kzbin.info/www/bejne/iaapgKiLZseJiJI

[@jimbob6290]

@@yt.myworks Thank you so much. Managed to take it apart and fix it. YOU ARE THE G.O.A.T

[@javierlopezmorato6420]

Good job