DeLonghi ECP3420 Advanced Mode | Espresso Time

DeLonghi ECP3420 Advanced Mode | Espresso Time | Full Run Down

Рет қаралды 18,481

Күн бұрын

Пікірлер: 73

@StabroGaming 10 ай бұрын

Picked up this machine one sale during the holiday season and this has been so helpful for someone new to the hobby. Thank you!!

@YD.00 10 ай бұрын

you're most welcome! feel free to reach back out if you need any tips!

@mindandmodest 11 ай бұрын

Such a thorough video!

@UserB19 11 ай бұрын

Right?

@CoffeeNerd2 9 ай бұрын

I bought a new ecp3630 3 weeks ago for 75.99 then bought the rest of the items similar to what you have off Temu for an additional 35 dollars, I already had the scale so for $105 I'm pretty pleased. I was really surprised at the sale on the delonghi and just manufactured at the end of January.

@YD.00 9 ай бұрын

amazing! that's a steal

@viet01 8 ай бұрын

How do you like the ecp3630? I just ordered one on Amazon

@CoffeeNerd2 8 ай бұрын

@viet01 I like it, it took me about 4 tries to dial it in to where I was getting consistent shots but I'm sort of new to espresso.

@viet01 8 ай бұрын

@@CoffeeNerd2 I’m new as well but can’t wait to start haha

@Hayley1518 6 ай бұрын

I have the same model and noticed i can't tamp it as he did in the video. when i do, it drips out. Do you have the same issue?

@FaithAndCoffeeBean 9 ай бұрын

Great video ❤☕️👍🏽

@A5en 10 ай бұрын

Thanks man, you helped me alot

@YD.00 10 ай бұрын

you're welcome!

@Kicmi07 Ай бұрын

Great video ! Can you post please the link for the scale from Temu, cannot find it on their website?

@masato-lee 2 ай бұрын

Very chill video to watch, thanks for the guides. Have you used the steamer for milk frothing? Or considered modding it with a better steam wand?

@someguy9520 4 ай бұрын

Though i am not a fan of using Temu, the upgrades to the ECP series are definitely needed IMO Bought one used for 39eur. Scale 22eur. Bottomless PF 21eur. 1zpresso q2 100eur Other small items 20eur 200eur for a very decent espresso experience. The Q2 grinder doubles as a travel companion together with my aeropress

@furkanlaçin-y9d 3 ай бұрын

very high quality people and video 🎉 Drink coffee bro drink coffee

@ritwikjs 2 ай бұрын

good quality beans and a decent grinder require just a 9 bar pump sometimes

@Earthmadegarden 10 ай бұрын

Nice we have like the same setup! Same scale from Temu too lol

@YD.00 10 ай бұрын

amazing! I hope it's going well for you!

@Earthmadegarden 10 ай бұрын

Thanks!

@Earthmadegarden 10 ай бұрын

I just posted an espresso video yesterday check it out if you have a chance.

@alexandermashkin2395 10 ай бұрын

Good video and a Long way to a real good extraction as everyone goes ) I saw your coffee is roasted like an italian - too dark, that is why a lot of taste notes are killed. That was also my starting point of failure) Check medium and medium dark roasted coffee from Costa rica, ephiopia, guatemala or kongo. 👍 They give you rich and creamy drink. You will forget these italian carbons) Your dose must be a little lower. Now actually you get your coffee squeesed by shower screen. Give it 3-5 mm more space

@YD.00 10 ай бұрын

thanks for the tip! I've been eyeing some Ethiopian beans for a bit. Ill be sure to give them a try! I did a nickle test (Same thickness as my puck screen) and it's actually just right in terms of the amount of grinds I put in! tried 16.5g for a while

@alexandermashkin2395 10 ай бұрын

@@YD.00 weight and volume depends on the coffee beans. 19 gr of costa rica coffee is equal in volume to 15 gr of brazilian But when you squeeze it to hard in portafilter you dontvallow coffee to incorporate water and overextract it

@YD.00 10 ай бұрын

ahh okay, that makes sense. i will take your advice and adjust appropriately! I appreciate it and youre absolutely right. i do have dial in new beans accordingly so it's definitely not a set it once and leave it!

@gipsasl 10 ай бұрын

I went straight to Medium Roast and although the coffee is nice and juicy is a bit too much acidic(citrus notes) for me. My next purchase is going to be medium-dark for sure.

@YD.00 10 ай бұрын

@gipsasl let me know how that goes! I always used medium roast..

@fuzzybunny3235 4 ай бұрын

The porta filter I bought from Temu is much better quality than the one that came with the machine. It has a solid black handle.

@onursancak7868 2 ай бұрын

please make a list i will buy all of them same.

@Ranghow213 4 ай бұрын

Is the gooseneck kettle also from temu?

@YD.00 4 ай бұрын

no lol it's Govee from Amazon

@Fred-eh7lj 2 ай бұрын

Greaaat vid! What to look for the portafilter spec? 51 mm thats it? Could you share a link of what you bought?

@YD.00 2 ай бұрын

the one I got specifically is out of stock but yes 51mm and also needs to have only 2 ears or notches

@Fred-eh7lj 2 ай бұрын

@@YD.00 Can you post the link even if it's out of stock

@ratoftoska7497 2 ай бұрын

Could you please tell me what your water debit is at with no portafilter in the machine? Mine is at around 5.5ml/s.

@IsrafilGuseinov 6 ай бұрын

What do you think about ikape brand? Is it worth it? Do you have some references to get all this set?

@garanda3 10 ай бұрын

Great video! Would you possibly have a link to the scale from Temu? I’m looking at a scale from SHEIN but it looks a lot smaller than yours! I have a similar setup with my ECP3420 and I noticed other peoples extractions come out more fully throughout the shower screen (my shots come out the same as yours like at 10:26 ) so I recently saw a video from Toms Coffee Corner where he replaces the factory shower screen with an IMS one and it looks like his extractions become more on par with more expensive machines, just a thought in case you were wondering the same thing or looking to upgrade the machine further!

@YD.00 10 ай бұрын

thanks! I wanted to put links in the description, but unfortunately, with items going out of order is the reason I didn't. I found a similar one here share.temu.com/CCz56jSgEcA but I still recommend searching for some. and I appreciate that! i will definitely look into it

@baristov 10 ай бұрын

Yeah and plus that 1zpresso grinder that cost more expensive than ECP machine itself hehe

@YD.00 10 ай бұрын

😄 no doubt about that!

@baristov 10 ай бұрын

@@YD.00 here in Finland, ECP cost 109€. And 1Zpresso 150€ 😁🥴

@YD.00 10 ай бұрын

pretty similar to the US actually! I think I bought the espresso machine for a bit more 😅

@baristov 10 ай бұрын

@@YD.00 some 2, even 1 year ago, hand grinders were much cheaper. Now when they became popular, companies up the price 🏷️ 🥴🤷‍♂️

@YD.00 10 ай бұрын

@SupremeVlad you're absolutely right 💯 that's business for you

@christinasittinger4466 7 ай бұрын

How do you descale this machine properly?

@DADDA Ай бұрын

Where did you get that dosing funnel? I believe I have the same bottomless portafilter for my EC850 but since its a kind of atypical sizing I wasnt sure which funnel to buy.

@YD.00 Ай бұрын

I bought it from Temu. Just make sure to purchase one to fit the 51mm portafilter

@DADDA Ай бұрын

@@YD.00 okay yeah thats what Im worried about. Hopefully the one thats labeled as 51mm will fit, thanks

@YD.00 Ай бұрын

as long as it's mentioned, it will!

@zibazare7056 6 ай бұрын

hi, thank you so much for the great video , I have recently bought a portafilter but coffee sprays out and splash every where rathenr than may cup! do you think the reason is the portafilter that doesn fit well or there is issue with my grinding ?

@YD.00 6 ай бұрын

Hey! It's possibly the grind size but could also be tamping. Make sure it's tamped evenly, and before tamped, it's distributed (no clumps before you tamp)

@zibazare7056 6 ай бұрын

@@YD.00 thank you so much for the reply! I will try and ask again if there is still issue🙏 I’m very new to this world so I need an expert help😅 thanks again

@YD.00 6 ай бұрын

@zibazare7056 I'm not expert! just another hobby 😄

@7akeem1999 6 ай бұрын

Hey man im using the same machine with a 51mm bottomless portafilter as well but if i put more than 15g of coffee it wont fit in the machine with a puck screen. Also i cant seem to find a scale that would fit with a cup on top of

@YD.00 6 ай бұрын

hey! how are you grinding the beans? and are you tampering it down with the factory plastic tamper? scale wise, I'm with you on that, I can make the cup fit but I have to put the portafilter on first and then work my cup in. depends on the cup size of course

@7akeem1999 6 ай бұрын

@@YD.00 the beans are preground, aftermarket tamper with the click. I have a kingrinder k6 order on the way, thats why im using pre ground for now. Oh and the coffee is about to expire in a week or so. (Thanks for replying)

@YD.00 6 ай бұрын

@7akeem1999 If it's the preground that's prebought in package, that would be the case! espresso grinder is very fine. good luck! and would love to hear how it goes with the grinder you receive

@7akeem1999 6 ай бұрын

@@YD.00 thanks for the reply, yea i wont judge any of the process until i get the grinder. For now, it extracts too quick and i think grinding finer would fix that. Side question, if im finding it difficult to get an even tamp, could it be the tamper or am i doing it wrong? im even using the 90 degree elbow method.

@YD.00 6 ай бұрын

I think the coarseness of the coffee plays a roll. I've been there with the preground coffee and tamping never turns out. my tamper has a spring and balance gasket so it sits on top of the rim of the portafilter. helps keep things even. something to consider if you still get uneven tamps when you start grinding your beans