The Ferrari Swapped DeLorean!

[@matheusppjedi]

Fueltech, the best by far. VAMO BRASIL

[@LITTLE1994]

Somebody finally did it right. Now you can reach 88 mph EASILY!

[@DeLoreanTECH]

More like 188

[@nosnatrilhaSC]

Tchê loko, esse carro ficou tri afudê !!! Parabéns Andersom , representando o RS mundo a fora !!! Alapuxa tché !!🎉

[@LucasOliveira-nr6ud]

For those who are saying this probably won't be finished, Anderson just decided to show the car at Sema basically a month before it happens, so they rush to get to this stage. Probably they will finish it before the end of this year.

[@DeLoreanTECH]

Can’t wait!

[@CheechElMexicano]

The DeLorean aftermarket wheels look sick

[@DeLoreanFalcon]

Right!!???

[@ronniemeyhoff8306]

It will be the best sounding DeLorean in the world, that's for sure

[@threezerol944t]

The lotus esprit v8tt sounded pretty good tho..

[@greenmachine5487]

The LS swapped one on KZbin sounds amazing.

[@opethmike]

I doubt it will ever actually run

[@honeyyellow8859]

I have faith in FuelTech they are a big company

[@DeLoreanTECH]

For sure

[@IRONGUS__]

Hello Delorean Tech. NEWIRON Engineering(Me and Josh) developed the adapter plate for the Ferrari F136 to G96 Porsche transmission used on this build. We also developed the aluminum custom "starter" flywheel for this car. Forty7 Garage did a great job, we will soon hear it! If any of you is interested on adapter plates or custom engine parts, please reach out!

[@DeLoreanTECH]

Great work!

[@luigiinoue324]

Parabéns @Fueltech! Muita criatividade e inspiração para o mundo todo!

[@HollywoodF1]

I love all the specifics in your commentary. You answered all my specific questions. Well done!

[@DeLoreanTECH]

You bet. Thank you

[@DeLoreanFalcon]

Agreed! Well done @DeLoreanTech

[@rlaw22]

Should have CNC'd a custom intake plenum to avoid having to cut the bulkhead.

[@laurensnieuwland4657]

Agreed.

[@AndreFranca99]

If I'm not mistaken this car was built for the Sema Show and they had like 1 month to do it, so there wasn't much time available.

[@laurensnieuwland4657]

@@AndreFranca99 That's why I don't like quick SEMA builds.

[@ConanOG]

Wouldn't be a good intake (size restrictions and they would need pipes to grab cold air from outside of the bay anyway), they already have a lot of space limitations, I don't even know how they will get the exhaust there to extract a good sound, it usually requires more space to sound great.

[@zandrak98]

The owner didn't want to change the Ferrari intake manifold. They cutted the bulkhead on purpose to display the clear intake pipes inside the cockpit to resemble the "flux capacitor" of the time machine.

[@chrispompano]

Totally the most Awesome'ness DeloreanTech video/build yet!😎 They Finally Did It!!!! Ferrar'Lorean, or a Delor'Rrari or DeLarri😋 I always wondered if anyone ever put a 308/328 or a 246 motor in a Delorean, which would've been my choice for the exotic sound I always think the Delorean deserved. Curious; does the Delorean community know about SuoerPro bushings developed out of Australia? All the C4 Vette guys are using them now instead of regular poly bushings & are far superior in their elastomer composition & not a harsh ride & NVH compared to regular poly bushings. Not sure if they have the correct sizes, but is worth looking into, to further improve the Delorean suspension dynamics & component upgrades.🏁 I bet they hand lay a custom carbon fiber intake, but Stainless would be even more retro. Maybe 2 Hervey-Style air boxes!

[@zzzzxxxxxz6017]

Don’t let Ferrari know this, you’ll probably get sued and have to return the motor

[@chrispompano]

You beat me too it....I was thinking the same but didn't want to even go there in my comment below! But, I hope not, or we'll have to do a go fund me defense for these Brazilian-Italian Delorean Dudes ! I was kind of hoping Ferrari would've gone after that Yutz stunt Influencer Cody Detwiler aka WhistlinDiesel who burned his Ferrari F8 to the ground in a corn field fire in Waco TX & fire dept was called out in a major ordeal. It was all over the internet last year & they video'd the entity incident. Im sure Ferrari sought legal action even against whoever sold him that car as Ferrari qualfies worthiness of all newer Ferrari sales! I wonder if these guys would take the chance & put a small DMC logo & prancing horse sticker under it on the upper front fender! But that could be a double-wammy intervention of Ferrari & DMC Houston in Federal Court! 😂 I'd do it, & register the car in Dubai under the name of a fictitious Egyptian Saudi Prince named Prince Omar Sharif...!🤔😁😁😁😁

[@RacerXGTO]

It's the cars. They don't want you tinkering with the whole packaged car. First they blacklist you from buying a new cars from their dealerships, then depending how deep your pockets are(celebrity status), they drag you into court. All you video media influences want to show off your work, but if it has "Ferrari" stamped on it, NEVER upload to the internet. What's the first rule of the Fight Club?

[@jwalster9412]

Then It will become a one of one McLaren powered DeLorean.

[@davel696969]

The question should be, why would you ruin a good Ferrari engine by wrapping it in a DeLorean? I mean there are a hell of a lot better classic vehicles worth dropping a Ferrari motor in but a mofo'ing DeLorean, STOP IT!!! Sounds to me, like someone has more money than brains 🧠 Yeah, the engine & the rims are nicer than the car you put them on/in.

[@davel696969]

​@jwalster9412 WHAT? Did John DeLorean smoke the whole dam bag of coke & think, " Boy let's ruin a Ferrari engine by slamming it into my POS car no one bought to begin with? What's next, slamming a Ferrari engine in my Pinto or a Yugo? As in Yugo nowhere!! I'd rather slam a Ferrari engine in a Pantera or something that deserves a great engine. You have a $40,000 to $60,000 engine in a car most people wouldn't give you $10,000 maybe $15,000. And that's if it drove off the lot new today.

[@brennovicentin]

Parabéns! Estou acompanhando o projeto!

[@KevinEastman-d6q]

Amazing build thanks for posting!

[@DeLoreanTECH]

Thanks! We're stoked about this build!

[@okarmann]

This is out of this world 🗺

[@thebob01]

1.21 gigawatts!

[@JoseSilva_]

O melhor DeLorean da história!

[@arturdemin2755]

This is how the delorean should have been from the start damn it looks good 😎👍🏻

[@DeLoreanTECH]

Agreed. John DeLorean wanted a twin turbocharged car and was months away before the operation was halted.

[@laurensnieuwland4657]

@@DeLoreanTECH There's actually a company called DeLorean Industries selling a "Legend series" twin-turbo PRV V6, named after the company that was supposed to build them, Legend Turbos. Also, fun fact: the original DeLorean was supposed to have a rotary engine.

[@doostar6875]

SEMA builds are just that. They are rarely finished and functioning at time of arriving at the show

[@mauricio12296]

This will work soon, it's not working at the moment because the car is going to SEMA, after that it will be done the right way

[@DeLoreanTECH]

Can’t wait!

[@burningdieselproduction5498]

Bluetooth COPs gotta be new hot thing on SEMA this year!

[@leonardwalton6668]

Sorry you are too late. I remember back in the early 80’s that DMC was going to team up with Lamborghini. For redesigning and the use of the V-12 Lamborghini engine! They made designs and testing. A lot of Car people don’t know about that fact! Top that!

[@DeLoreanTECH]

I did not know! A V12 would require using the rear shelf area so maybe a true mid engine design !

[@bernardopereira1092]

@@DeLoreanTECH It doesn't even fit a V10, let alone a V12.

[@CHOPSHOPX]

This thing has a 1% chance of being finished. I would be impressed if I saw it running at SEMA.

[@TarsoSousa]

didn't Anderson already said on his channel it won't be running at SEMA? but only for display, and for sure will be finished after SEMA

[@joshuared1000]

Bluetooth car =) But so cool =)

[@nicholasleonardo2155]

Vai funcionar, está indo apenas para o Sema assim e logo após retornará para concluir. Esse com certeza não é das adaptações mais complexas que os brasileiros já construíram, aguarde.

[@diogofaria4833]

e é de um Brasileiro hein muito bom vindo aqui da minha terra

[@murry001]

i love swapped motor Deloreans, makes the car so much more fun to own

[@Sergeantgrunt]

Hummmm... LS7 swapped Ferrari California! That could be fun. Call Chris from B is for Build and let him know what you have.

[@AnthonyMichael504]

When is the expected finish date ? This is really cool and all- but would be nice to see it operating.

[@DeLoreanTECH]

Soon very soon!

[@mutantebr9344]

Provável que fica pronto para o Semma... Então já deve estar pronto ... Mas ainda o Anderson ( dono do carro ) não postou o vídeo

[@giuseppelavecchia775]

Amo la delorean macchina fantastica,e gran motore!!

[@DeLoreanTECH]

🙏 thank you!

[@honeyyellow8859]

Those wheels are the bomb! Oh yeah the Ferrari motors kinda cool too lol

[@DeLoreanTECH]

They're pretty sweet!

[@jvhayashi1985]

Made by Brazilian guy!! Feito por um Brasileiro!! 🤩👏

[@chrisscott1284]

Lovely. Thank goodness it doesn't have a horrible bodykit. I prefer a clean line Delorean.

[@DeLoreanTECH]

Same

[@KeritechElectronics]

Whoooooooa, quite an engine... No room for Mr Fusion anymore - not even a flux capacitor! Sad to see the donor Ferrari in such a bad state. Purring like a kitten. Thing of beauty, joy for ever.

[@DeLoreanTECH]

The air intake air cleaner box is styled as a flux capacitor! Check our FB page for photos

[@gusgus404]

Now a cool body kit would complete this car

[@ConanOG]

I don't believe he will use anything like that. The owner likes custom parts but always preserving the original lines of the car.

[@touraneindanke]

Keeping the original 👀 looks of the wheels as a guide for the new ones 👊💪 Very nice 😍

[@DeLoreanTECH]

You know it!

[@Draco_Alpha]

that's a really cool car. i hadn't thought anybody would attempt putting a Ferrari engine in one of those before... i bet it's gonna sound awesome. what's their exhaust setup gonna be like?

[@thiago_lc.c]

Isso será um segredo guardado a 7 chaves . Este veículo ainda tem muita história para contar !

[@Heavenlygamer19YT]

OK that's sick!!! I love that!

[@omartopete8599]

Amazing setup! Where are the wheels from?

[@techtreko]

This wheels is make a special order by Pure Forged Wheels

[@mutantebr9344]

Brasil ❤❤❤ fuel tech 🇧🇷🇧🇷🇧🇷🇧🇷

[@alex1520]

At least it will be able to get up to 88mph now :P

[@DeLoreanTECH]

They always can. Just not this quickly!

[@DeLoreanFalcon]

288 mph?

[@guns942]

Great idea.

[@hugosales7255]

Fueltech is Life. Fact. A F U D E

[@bigsarge2085]

Pretty cool and interesting!

[@DeLoreanTECH]

Right??

[@Emily.Naomi10]

That surely goes above 88mph

[@DeLoreanTECH]

188 mph

[@randysanchez3960]

Awesome video. Thanks! Seriously nice setup. #5945

[@joshuared1000]

Love the new show!! maybe we can get you a new Mic =)

[@sleepysamk1400]

The Delorean just became even more unreliable thanks to the Fiat engine. 🤣🤣

[@dellkajiwara5377]

Forget about going 85 mph. Going over 200 is the new speed to the future, and then some😂

[@DeLoreanTECH]

I think with that digital dashboard the imagination will be the limit when you hit 88, 188 and beyond

[@Lgwasherfan5623]

Now it'll reach 88mph!

[@DeLoreanTECH]

188

[@donwan7181]

They should just run the tubing straight up to the roof and put a functioning roof scoop in it. Having intakes do a 180 ain't gonna help feed it with air.

[@chrispompano]

Absolutely! But that Ferrari engine is so highly efficient in design by Computational Fluid Dynamics & major technology, the loss would be less than its total Awesomeness looking!!!! But my thoughts on the very restrictive design of the PRV's roller-coaster-ride air-flow loss thru the entirety of the Bosch K-jet plumbing that has more twists & turns than a human GI tract or Presidential Race for the White House! 😂. I'd love to buy a SuperFlow flow bench & do full testing to measure how much pumping loss there is on the entire Delorean intake system from tip of the intake snorkel too the head & then do some creative moddingon the intake alone.... I have some ideas that have never yet been done before too minimumly & drastically improving the entire PRV intake system as well as putting those heads into the hands of top engine builders & porters who use CFD modeling or those few who are the old time famous race porting genius's before their time is up on this Earth. I am thinking to commission a well known porter to set up a preliminary study, if I can get him interested in doing it for the PRV community & maybe see if DeloreanTech would host the video, but also need to make a donation to the MJF Foundation. I have such a bug up my backside seeing things that others don't seem to discuss about the PRV. As an example I'd remove that puny stock K&N & put the biggest conical filter at the beginning of the intake or inside the rear fender & build a fresh air box with the side scoop to lfeed it, & by removing the filter from the air box, the air would have time to ramp-up velocity at WOT going thru the intake before slamming into the bottom of the air meter floor slowing down, then thru the restrictive throttle body plates with air obstructing springs on those throttle blades which I am puzzled of their function (John Lane throttle body spring mod from 2008) then the slower air piles up into the 180 degree elbo, further t slowing down & loss of laminar flow thru the 180 bend, ect, ect, ect. but you probably understand what I'm blabbing about. That 180 elbow is really the worst part of the KJet, but it could be improved internally with some ideas & methotical flow mods & addition of extruder honing & strategically placed air vanes if someone could verify thru CFD modeling would be great.....has anyone ever run their Delorean KJet w/o the air box & no filter & reset the a/f mixture procedure to see if there is any performance gain or install a huge velocity stack onto the air meter?🤔 But to feed that beastly Ferrari motor, a 180 intake is the only way. Personally, I'd just put 2 massive Conical Filters in a fancy smanzy air box & leave it inside the passenger compartment to here the Symphony!!!!😁 The exhaust is going to be very challenging & I would expect to take forever to build & redesign the frame, ect. & even if it could be done. However they do it, & bet thats where the major loss in hp would be & very significant w/o the help of Ferrari engineers or an F1 exhaust fabricator.

[@mikelmarion]

A roof scoop would look dumb

[@Danilad89]

If going to sema it needs the paint sorting on the rocker cover

[@666-t4d]

2:36 safe to say, seatbelts were not worn…😮

[@crusher1685]

now this is cruisn!!!

[@justineaton5750]

Wheres the link for the wheels?

[@DeLoreanTECH]

We’ll be sure to let you know when if they go into mass production or could be a one off! We’ll get back to you!

[@techtreko]

Is made by Pure Forged Wheels

[@diogofaria4833]

e é de um Brasileiro hein muito bom vindo aqui da minha terra

[@rickyturner223]

I really don't want to be negative but this isn't a swap. its the block bolted in to the car. and really not SEMA ready. i would love to see a video explaining why some of the choices were made like... there looks to be plenty of room for exhaust headers but where is your gear box going to go? and how are you going to get driveshafts to the rear wheels? could you not have flipped the intake around or failing that create a custom one so that you didn't have to cut a hole in the firewall?

[@DeLoreanTECH]

As we get more info we will release an updated video! So far since this video was made they already completed the custom Flux Capacitor inspired air filter/cleaner box in the rear shelf and added more stuff to the car like a wide stripe kit and our clear EuroStyle front indicators. More to come!

[@bernardopereira1092]

Just watch the full video of almost 3 hours with English subtitles on the car owner's channel that was released last Saturday, the channel is @AndersonDick ... there he explains in detail why everything,

[@thebob01]

Should've had that kind of power to begin with, or at the very least and electric motor.

[@VIW3784]

Wait a minute, Doc. Ah... Are you telling me that you built a Ferrari....out of a DeLorean?

[@DeLoreanTECH]

If you’re gonna build a Ferrari into a car why not do it with some style!

[@t0ny21]

The intro music got me rollin!!!! 😅😅😅😅😅😅😅😅😅😅😅😅😅

[@DeLoreanTECH]

Thanks!

[@daniellcruikshank7922]

Why do people there dislike amber indicator lights a lot so much It makes more sense than using a brake light to indicate

[@DeLoreanTECH]

It’s not that we dislike the ambers we just like the clear look more. Plus you can still output amber colored light with the appropriate LED

[@hiramrodriguez4323]

Original cyber truck.

[@DeLoreanFalcon]

oh man how are they going to fit that monstrosity of a motor into the rear of the DeLorean without serious frame modification?

[@DeLoreanTECH]

You'll see. It's kinda wild.

[@opethmike]

They didn’t. The air intake goes into the cabin. Bootleg

[@honeyyellow8859]

Most two seat rear/mid engine cars start at the back of the seats so this kinda makes sense? Is the car now a mid-engine?????

[@lucasnascimento8467]

They left everything ready on the chassis with the reinforcements that were needed. On Anderson's channel, they share what was done to accommodate the engine.

[@nexus5729]

top la Delorean ces mieux que le moteur renault v6 ..de la france lol..cheval + alu un-- UFO -- gg a vous..

[@Takeitlightly6]

Roof scoops for each bank of cylinder head.

[@ramyanthony4615]

If I had to install a Ferrari motor into a Delorian and it actually function to save humanity we’d be doomed

[@allanscaldelai5690]

Muito interessante seu trabalho amigo parabéns, essas tampas não podem ser viradas? Gostei da bandeira do meu país aí na sua parede

[@grantleyhughes]

I bought a Maserati Ghibli V6 TT that's looking for a home. I love these kind of builds.

[@DeLoreanTECH]

You’d love this then!

[@lucasxavier7255]

ISSO E BRASIL COM "S"

[@jesseallan3886]

I love the wheels. I think that a thin white wall tyre would set it off. Just a thin white stripe. ✌️

[@lucasbertazzoni]

Amazing!

[@davidsousa9111]

😂 that’s the only thing it probably needed in the first place

[@alanferreira484]

This is Brazil!

[@TheOzBR]

Vi que voce disse que vai pegar a admissão de ar ali de tras. Vai ter um scoop pra isso? Pq ali atras pode ser uma zona de baixa pressao. Ainda mais pelo caimento da traseira onde o ar pode "descolar" da carroceria criando vacuo. Deixando a mistura pobre quando atingir mais velocidade. Lembra do fusca quando criaram aquele scoop interno nas versoes dos anos 80 pra melhorar a refrigeracao? Entao. Pode nao ser uma boa ideia tomar ar ali de de tras. Nao da pra pegar naquela ventilacao da coluna B?

[@doostar6875]

Disappointed that the video didn't show us the engine running

[@honeyyellow8859]

SEMA

[@einautofan6685]

Because it's still not finished! There is no exhaust...😉

[@honeyyellow8859]

@ coming soon!

[@techtreko]

In build process, need a lot of accessories to finish the project...

[@luizanyonioaraujodasilva6277]

Aí já é o inimigo agindo hein 😂😂😂😂😂

[@globalyoutubano7151]

Amazing

[@datmixednut1254]

5:34 looks likes that's gonna rub the inner lip of wheel and cause damage

[@DeLoreanTECH]

Some rub some don't...hand-built with lots of variability amongst cars

[@MegaKENWORTHT600]

Hopefully this car will run n drive at sema

[@DeLoreanTECH]

Won’t be ready in time for SEMA but perhaps 2025

[@henrikmpunkt]

DeFerrarean nice

[@JerrySaltoon]

Wish I could find smash V8 or v12 fererrai UK then put in Jag

[@fernandopasini6350]

Fuelteck 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷❤️❤️❤️

[@nicholas_landon781]

DeLorean всё больше и больше появляеться на Российских дорогах с чем бы это связанно, влюбом случаи это хорошо ранее недоступное и очень редкое теперь уже доступно

[@Gary-xm6gc]

What's up with all the small gauges on the passenger side dash.

[@josecarlosmartinsjunior2710]

These are Fueltech WB-o2 Nano O2 conditioners, they were assembled that way to resemble a time machine.

[@DeLoreanTECH]

Yes Time Circuits Display styled!

[@genearoth3970]

This is a wonderful ideal , To get the slow Delorean down the road faster !!' Where is your shop . What els do you work on . lGene ,

[@xenokon9335]

[@voyles36]

Bleeding those front brakes may be fun… I’d assume you have to turn them upside down to bleed out the air?

[@frankgarcia2718]

Amazing swap, but, for me, there are too much horses for that brakes. (Overheating risk). But still it's a great creation

[@ConanOG]

For a track car maybe, but this is a street car for some casual rides, it will be alright

[@laurensnieuwland4657]

Awesome! Though I hate to see people cutting into these things for mods.

[@techtreko]

This car was found in a state that was practically ready to be thrown away, the engine and gearbox were dismantled and lost, the bodywork had serious dents in the stainless steel, and the chassis had serious corrosion problems. The buyer promised to bring it back to life with the mods and components to be a showcase for his Fueltech products.

[@laurensnieuwland4657]

@techtreko I get it, but still. They could've sourced an original engine and turbocharged/supercharged it.

[@techtreko]

@@laurensnieuwland4657 Because the original V6 is not and has never been a good basis for a performance engine. Originally the owner had a Masseratti V8 engine, he looked for a crossplane crankshaft to get the Ferrari sound, and in the end he found this engine for $8,000.

[@laurensnieuwland4657]

@techtreko The original V6 is a perfectly good performance engine. The twin-turbo version was said to have outperformed the highest end Porsche 911 of it's day. The 3 litre versions could even produce up to 450 hp in their racing spec.

[@talonpilot]

Maybe now it will actually be able to reach 88 mph!

[@DeLoreanTECH]

188

[@El-Hombre-Random]

some one need make a E lambo with a tesla engine

[@obviouslytom]

Should have done a Lamborghini motor mainly because unlike Ferrari, they would have encouraged you and probably helped!

[@DeLoreanTECH]

It was an opportunity with the Ferrari. Maybe for their next one?

[@tiagobras3957]

brasil uuuulllll!!!!!

[@louis-geoffroydesmarais9834]

Is it going to be FWD?

[@DeLoreanTECH]

No it’s RWD

[@americanjoe9767]

Should have put corvette engine or Toyota V6 twin turbo for reliability.

[@donaldjackson4456]

Now it will do 188

[@DeLoreanTECH]

Yes

[@donaldjackson4456]

@ Doc Brown would be proud 😂

[@KaosProject21]

lol youre taking it to sema with paint flaked off the manifolds?

[@KaosProject21]

ohhh Its not anywhere near done

[@DeLoreanTECH]

It's a work in progress!

[@KaosProject21]

@@DeLoreanTECH i saw it in another video, you DID send it flakey 🤣

[@KaosProject21]

i mean how much is some red wrinkle coat? even to strip and repowder coat isnt that expensive at this level in the game but if turn around was an issue why not tape off the good area and shoot some *good* 2k rattlecan red wrinkle on just that area... it feather the edge with some course steel wool and basically send it. i woulda done something lol do people send half done projects a lot?

[@daapgaming]

They are ugly but so cool, it’s like the red headed cousin that’s a throw back but a good bugger .

Com esse motor nem precisa mais de plutônio 😂

[@peterpann9619]

An LS swapped would have been so much better.

[@DeLoreanTECH]

But there’s so many of those already. I agree they are awesome in their own right but nothing with with some variety. Plus now the car is properly Italian!

[@peterpann9619]

@@DeLoreanTECH But the car is American

[@laurensnieuwland4657]

@@peterpann9619 Made in Northern Ireland, with a French-Swedish engine, using a British chassis, designed by an Italian. This car was about as American as my left pinky toe.

[@luizqueirozneto847]

Ferrorean or DeLari

[@DeLoreanTECH]

The jury is still out on this!

[@whome5810]

Why don't a lot of American's wear seat belts? Look at the Ferrari windscreen, that is from the passengers heads, they may well have life changing head injuries now. Wear your seat belts kids!

[@ronstiles2681]

Sorry ive done many mods there is days and days of work left not even close to being done

[@DeLoreanTECH]

Yes a lot more to come but only in the engine bay. Oh yeah and rear shelf!

[@geniferteal4178]

Ferarrian?😊

[@DeLoreanTECH]

Not a bad idea

[@geniferteal4178]

@DeLoreanTECH DeLarrian?

[@No-vq1iv]

Enzo is rolling in his grave so hard right now you can probably use him to power the donor car. 😆

[@DeLoreanTECH]

Good one