Shooting The Worlds LONGEST Silencers!!! But Do They Work???

Sickest long sleeve we have ever made! www.bunkerbran...
Watch me vlog. / offtheranch
/ demolitionranch
/ drdemolitionmatt
"Club Diver" by Kevin MacLeod from incompetech.com.
Outro music by MDK, • ♪ MDK - Dream Eater (N...

[@SparkBerry]

Matt, a man of culture, delivering on his people's wishes!

[@mickenoss]

His face every time he said 69. 🤣

[@BANDODEZ]

Been waiting for this one

[@George42041]

A man of culture and a man of Science. God bless the demolitia

[@redcg6578]

What in the long noses?

[@jumpingoutofairplanesmentality]

Incorrect, this was my idea before it was his, great men do think alike that being that, you are all peasants

[@mr-barehiney]

Not only is it quiet, it's also very hard to miss your target when the end of the barrel is mere inches away from it!

[@hypercrow9563]

Definitely one of the best comments here

[@eldsveg_s]

Your comment is at 69 likes. I must not change that. But it's a very funny comment!

[@bigiron9345]

But is that the "end of the barrel" tho aka the muzzle or is it a long way from it

[@MrSizas.]

He bout to hit them point blank 😂😂

[@JerrysArtOkc]

🤣🤣

[@stormchaser2oo839]

5ft of suppressor finally gets you the quiet levels that the movies try to make you believe they give you!

[@acctsys]

subsonic, that is.

[@CGeis21]

@@acctsys yeah any decent suppressor running subsonic rounds is going to be ridiculously quiet, still hard to match the movie quietness tho unless you’re shooting a silenced 22/22lr with subsonic rounds

[@kieranjinks3491]

Z

[@fluffy1376]

Not even close! Movie suppressor sounds are retarted quiet. Im surprised this 5 footer is actually as loud as a normal sized suppressor😅

[@dwmueller76]

I’m baffled by how quiet it was!

[@jonathanbennison9220]

8:23 The fact that you haven't had a baffle strike yet.... Are you feeling... Baffled? Oh. Ouch.

[@SeltasGuy]

2:32 how he goes on with the bit for like 30 seconds is just really funny to me

[@SeltasGuy]

I'm gonna put edit here b/c it won't let me edit: Yeah, just realized the joke goes on for a good chunk of the video, the two guys are some real men if I've ever seen 'em!

[@xorap]

this is a 'linking all the dry erase board markers together' vibe

[@menchelke]

I am making a guess after you did 4 sets on the .22, I would think that the recoil that generally causes a slight barrel lifting force, would cause the tip of the droop to spring up with good enough timing to avoid being struck, basically it self centers, as there is just enough droop to spring ration. But I also think you will hit a point where you get a baffle strike, so there is probably some sort of sweet spot that some mathematician can figure out. *edit* and my theory of why you starting getting baffle strikes when shoulder fireing, is because your body isn't holding the rifle as rigid as the vice, making you absorb more energy, changing the flex of the barrel and also you where swinging the rifle, which would mean the barrel would have momentum vs being at rest before each shot.

[@evilbron666]

i was thinking this also, as well as the pressure from the shot putting internal pressure on the suppressor, 'inflating' it and straightening. maybe :)

[@susanbutler2498]

Excellent thinking mate!

[@youngeshmoney]

For a mathematician to "figure it out", it'd only be specific to one gun with one ammo type and one specific length. They'd have to run thousands of tests to figure out the balance for each gun, ammo, and silencer length. I don't think it's worth it 😂

[@patrickchef8303]

@@youngeshmoney you ever been on r/theydidthemaths before they would love a challenge like this

[@DavidN23Skidoo]

Go the the welding aisle at your local farm store and get a soapstone stick to use on the threads.

[@kampai.r6998]

“ stop you gonna get me in trouble” 😂 6:51

[@bobritter7197]

"Don't look away from me." Oh, I laughed 😂😂😂😂😂😂😂

[@rickyshultz2051]

I don’t know how many times in my life I’ve been told , don’t do that ! 😆😆😆

[@reefdiver200ft]

It would be interesting to see how many decibels each section added to the sound reduction.

[@2Glm005]

U need to 3d print supports for the suppressor or something to stop the droop

[@michellebooth6699]

when your putting the barrel on the gun it sounds like the kids screaming in your basement

[@staysafe1096]

How weird lately ago i was thinking of balance suppressor not too big, not too small. And i stumbled upon this video. I guess those previous suppressor lengths that i used to search are not bad at all😅

[@ewingfox6459]

my dog hated this video. He's been hiding in the back yard since you started up with the 9mm suppressor lol :D :D :D

[@dereklee6090]

Would have been interesting to see the diminishing returns, at which length is the suppressor most effective, and at which length does it stop having any additional affect on noise reduction. Get a decibel meter and re-test! :D

[@shaneh7519]

I’m also curious to see if it affected the velocity of the bullets. Should have shot through a chronograph

[@kaidwyer]

@@shaneh7519 I mean, at the lengths he was using, it had to have slowed the bullets down.

[@andrewbell7696]

He gave the answer. The heat pattern he described will tell all except velocity change.

[@elijohnson9065]

@@kaidwyer Not how that works, once the gas has accelerated the bullet to its top speed it keeps expanding in the suppressor just like it would in the air without one, if anything it probably gained a little bit of velocity just like with a normal suppressor. Of course the baffle strikes would slow it down, but other than that there's no reason that it would.

[@alimanski7941]

@@andrewbell7696 The heat dissipation probably correlates with the sound reduction, but I doubt it's a linear relation, least of all 1:1. The heat dissipation depends on the suppressor material, rate of burn, length of barrel, etc. These things have a lesser effect on the sound reduction.

[@avemarduk3718]

19:05 I've always been of the opinion that suppressors always make any gun just *_look cooler_* but... Man, that is so goofy lmao.

[@JackThelRipper]

Matt look up a product called Zoom Oil, i.e. turbine oil, it’s light and does great with heat. That should get rid of that screeching in the threads.

[@fastecp1]

Say hello to my little friend. Now you know what a moose feels like trying to walk through the woods. By the way, they make this stuff called oil.

[@kurtkiernan7139]

Need to run auto fire. For the sound quality segments. Like the .22 was making the craziest sounds when the camera was looking down the top of the barrel and we need that sound recording from all angles like you had but now with auto fire. Ganna give it to some music freak and have them make some techno.

[@ccpm8049]

Love the content as always. Would love to see some heavier rounds tested like this like .45acp .50ae and some bigger rifle rounds like .308 and up

[@dafloo5326]

Im Not entirely sure, but i think the Company doesnt make supressors for those

[@robertriley9327]

At timestamp 1503 when you are screwing those baffles together all I can think of is sounds like one really cheap crappy turkey call so with anything if the baffles wind up being drunk you can always use it as a turkey call 😂😂😂😂

[@firewalldaprotogen]

20:09 we finally got the video game suppressor sound effect! lol

[@LittleJennings38]

I triple dog dare you to take the super long supressor with you to an indoor range.

[@Titus-q5b]

For obvious practical reasons, I'm guessing these aren't the silencers of choice for the professional assassin community.

[@projectsin001]

So that’s where my stove went. 😅😂

[@Nolast12503]

Not enough comments about burning the glockamole imo. underappreciated.

[@flipachy]

Just everything about This video is great!! The fun the experiments just gold brother!! Thank you

[@Cooltech06]

Certified Hood Classic: "That's what she said" edition🤣🤣....

[@PapaKayOh]

That looks more like a lightsaber that a quiet downer there sir…

[@MrMaKeMeDiNnEr]

Imagine trying to snipe someone and you accidentally poke his eye

[@tylerpetrar8442]

Imagine doing CQB with that suppressor 😂

[@CaptainCreampie69]

Q makes killer stuff. I love all their cans I own. People hate on it because they simply can’t afford it. If their stuff was any cheaper it would be even more difficult to purchase than it is now.

[@michaels9739]

Q suppressors aren't really that expensive..

[@ryanpeck3377]

People hate Q because Kevin is a dick. Their suppressors arent that expensive compared to other brands and really arent anything special, not complete garbage but there are better performers. The Honey Badger is overpriced for what it is, I know people who could buy multiple Honey Badgers right now if they wanted and they’ve bought Sig Rattlers and/or B&T APC 300. These are guys that own 10+ suppressors, multiple Knights and HK firearms (both brands are overpriced in my opinion but still excellent products) and they wouldnt own anything Q. Especially when there are better options

[@TennisWorldSetPoint]

Where the notched aligned probably not. He could have put the 22 with some stilt so it didn't bounce after the shot even then it still worked I didn't think the sub9 would cycle but it didn't and didn't he was worried it would drop even it it did because of gravity it would take some distance usually it would not travel true because of the baffles bouncing upland down after the fire. That was insane. If he had a stable table to hold it up and had every single one lined up with the Notch I'd like to know which ammo wjoch barrel and twust abd length is the best. I really thought the sub was going to be an issue and I'm sure it would be after a certain amount because its heavier and slower i wonder what woukd hapken with the CCI Quiet 22. I actually used that and it cycled so well. Yhey crimp it so well. My federal ones suck they dont cycme and its says it won't. But CCI not only does it feels strong out the gate like a regular 22. and test for noise decimals per foot. What was the lowest you can get with that length. If you have seen the inside of some surefire surpressora there cuts or slits after the first and as it stands the side walls get smaller so they can fit like 16 baffles in a 7inch can then u see square notes on the tops where they stack I'm not sure what that does. But I always though Surefire makes the best in terms of overall designs. And first flash reduction i think the cap has so much to do with The flash but the stacking too. How they stack them the distance with the side walls is really important. Anyone know what those square notches do on the tops of each baffles they are stacked. Does it leak a but of gas out. Mostly SS. I think that's the smart thing because there's all sorts if ss now and some are stronger and they use really light metals too titanium is very light and strong but its not good to heat it alot. Loses its strength It's not like knivess vg10 v2 9chrvmore like 410 440

[@dus777]

there's stuff called lubricant, that will solve a variety of issues in this video

[@zacharyclownphobic2316]

Why not support the suppressor with a rest or something to reduce droop?

[@MontanaBallistics]

Ahhh so that’s how one puts a suppressor on… lol

[@emdeejay7432]

Im surprises it was still as loud as it was

[@treeguyable]

ATF , good thing they don't charge for a tax stamp, by the inch. Wait, you mean there are like 7 supressors in one? Gimme the calculator.

[@triggnolker]

he should get a nitro 700 and shoot a car

[@Selmarya]

in the thumbnail it is almost as long as m... (my lawyer has suggested that I should not continue saying this)

[@trc8197]

There is no war in bah sing se.

[@SoJager]

🤣🤣🤣🤣

[@g_w0lf3n30]

Nah they will see the suppressor!

[@lectersarmory1386]

The sound is enough to blow their ear drums out

[@seanmcintyre4990]

I've found using some lube on my erector makes them go in easier with a lot less effort and noise.

[@edward.doctor1892]

Not if its already integrated

[@tombiby5892]

I love the thought that you avoid detection with super silent shots, then instantly give away your position when you unscrew the suppressor. Squeeeeeek.

[@cackles1005]

The giggling also probably wouldn't help.

[@englishboi8816]

The subtitles said it was music lol

[@bradleymackey5406]

Get one for the 50 bmg

[@T1gB1ts]

The smile and the long pause after 69..😅😂😂

[@AffectionateLocomotive]

That's for so that ur ears don't bleed.

[@Planehazza]

The irony of a suppressor being almost silent but enemies hearing you attach it from half a mile away.

[@Davelon420]

That Was the most cringe asmr, but damn it sho did hit the target more the more squawks there were.

[@FaTDawG604]

That noise...

[@Davelon420]

@@FaTDawG604 you mean like nails on a chalkboard?

[@Spar10Leonidas]

Well, the good news there is that it probably won't matter if he misses his shots, because they'll probably already be dead from the super-intense grinding of their teeth.

[@FaTDawG604]

@@Davelon420 I didn't realize noises coming from a KZbin video could have that effect on me, definitely not the video I should have watched to wind down before bed... I do honestly appreciate the fact that he was fully aware of that but did it anyways 🤣.

[@furudanuki6835]

Should have had a decibel meter to compare noise levels as each section was added!

[@CNSninja]

That would've been super interesting, especially since the quality of "loud" or "quiet" definitely doesn't translate to KZbin video in a way that the viewer can quantify.

[@albumreviews11]

@@CNSninja Your vernacular vocabulary voraciously verifies villainesque vaudeville vocation.

[@pupil5763]

@@albumreviews11 nice alliteration

[@albumreviews11]

@@pupil5763 ❤️

[@worldcomicsreview354]

"Do you hear that? The enemy appear to be using old-fashioned typewriters over in the trees"

[@harryhoudini714]

Remember, with the Erector 69 you need to make sure you have permits for multiple States because the moment you point that thing you will probably cross multiple Borders. If after shooting no bullet exits the barrel, it does not necessarily mean a misfire, do not watch down the barrel remember that it takes the Bullet some time before it reaches the end of the barrel (a bullet only travels at around the speed of sound after all). Sometime a bullet might not come out at all since it probably gets lost on the way!

[@giorgibabucidze6627]

Erector 69 sounds weird

[@EdyAlbertoMSGT3]

"A bullet only travels at the speed of sound" isn't the speed of sound on the slower side for bullet travel speed? Please inform me.

[@Dkgow]

I hate when my bullet gets lost while traveling. It must have missed that left at Albuquerque.

[@MatthewJarvis-zw2sz]

@@EdyAlbertoMSGT3 I think you missed the point of the joke....

[@Kittsuera]

@@Dkgow yeah, it was supposed to go strait past Albuquerque. if its making a left, you got a bigger problem, which would be baffling to see.

[@stefani.5737]

Impressive that you can miss with the barrel physically touching the target.

[@keikenxfe2proalt434]

CSGO style

[@chrishoran4441]

Love the vid

[@Lunumbrus]

Classic Matt, never zeroes his muzzle device before a video.

[@monkeyprime6605]

in pvp, i miss and my barrels are pushing into the enemy's skins

[@terran6686]

@@keikenxfe2proalt434 XCOM style

[@mattst2717]

The fact that everyone on the set was laughing is priceless 😂

[@maxzzzie]

He couldn't stop screwing his erection.

[@RozKounelakion]

I mean there were 2 people on set but I get what you're saying

[@jimmccree9627]

It always is; they all have a great sense of humor! 🤪 👍 😝

[@Whin556]

@@RozKounelakion if he could read he'd be very upset with your comment

[@LiveThatAdventure]

I might have worn out my volume buttons turning it up and down every time he screwed on the 9mm 🤣

[@1234567890CAB]

If you permanently attach enough of those sections to bring the barrel up to 16" you don't have to worry about the ATF's new pistol brace rule and you can just put a stock on it

[@frostriver4547]

Pin and weld it 😅

[@NotMe-ej9yz]

Well with the way things are going in court right now, you probably won't ever have to worry about their new "rule". They've been getting their a$$es handed to them in court for months now on pretty much every case people bring against them 🤣

[@AMabud-lv7hy]

There's a reason ATF don’t try to fuck with lawyers

[@TheBeeFactory]

Good idea. So you're STILL filling out ATF forms for the silencer and then waiting a year or two instead of the like 30 days to get a form 1 done for an SBR. You showed em.

[@Bigol_Jimbo]

@@TheBeeFactory I mean... you're right, but you didn't have to say it man D: Plus, you then get to say you have an integrally suppressed whatever... then your baffles wear out and you have to commit a potential felony to fix it by removing and then replacing the expensive part of the toob.

[@TACTICALwaffle2]

You should have gotten a decibel reader to see if the additional suppressors actually made it even quieter

[@____________4510]

you can hear it get quieter for sure, but it would’ve been dope to see by how much

[@hkfifty871]

My guess is that any of the suppressors that were getting hot/warm were still having an effect (and slowing/dissipating the gases) but anything past that didn't. Also, I think it would have been interesting to have done a supersonic vs subsonic comparison at each of the different lengths (though given he wasn't even sure if it would work, I can get why he didn't).

[@08mario08]

That’s exactly what I was thinking

[@aamry]

@@hkfifty871 At a certain point, the muzzle blast would be completely suppressed, and all you'd hear is the action

[@hkfifty871]

Even with a BUNCH of suppressors, there’s probably some upper bound on how much decibel reduction you can obtain, and I doubt it would be enough to totally suppress the muzzle blast. Though I’d certainly love to see someone try.

[@laughingbuddha5427]

That beginning setup just so you can use "glockamole" was a thing of pure beauty

[@Dtoaster5]

[@AtomBomb420]

I was not expecting that, I was watching and then afterwards, I had to take a double-take because I missed the "Glockamole", when I realised, I could not believe the epic event I was witnessing

[@blackcrasanblade]

@@AtomBomb420 same

[@joecopeland4380]

I think Matt was 'baked' when he made that joke.

[@blackcrasanblade]

@@joecopeland4380 if matt was or not wither way still funny

[@3496coolairplanes]

Matt -a grown ass man who is genuinely smart and highly educated- not being able to keep from laughing and making peepee jokes is the funniest thing I've seen all day! Love it!

[@floridawoman7880]

be honest all the dudes in the audience were also laughing there ass off

[@matthewmccartney3926]

He had me at boyyoyyoing!😂

[@RedeemedPaladin]

Peepee jokes are timeless classic

[@alienspacebones]

The day peepee and fart jokes stop being funny is, I hope, my last.

[@tunasandwich8049]

You always forget that Matt is a literal licensed veterinarian

[@successmadeeasy]

I saw this suggestion in a previous video and I thought “man I hope he tries that”. Matt never disappoints

[@Northstar612]

Same I wished too

[@jacoblittle3693]

I personally would of liked to have seen a Db meter to see the diminishing returns on using a smaller one vs a longer one. Great VId Matt!

[@michaelfox2433]

Scam bot response aside,...jeeze I hate those things, I think that's an excellent idea. Matt should definitely revisit this,....for science you know........and maybe a few more dick jokes.

[@BrassBashers]

Coming to Demo Ranch expecting scientific data AHAHAHAHAHAHAHAHA

[@soulis1000]

And a crono to see if the speed of the bullet is affected.

[@dragonwithamonocle]

the Db meter might not make it super clear though, since the logarithmic math behind Db measurements means you'd need to do a whoooole lotta math to really see the data clearly.

[@dobledekersoulwrekr]

@@soulis1000 Yup, I'd like to see that also

[@DoRC]

I cannot believe that you went through all that and didn't shoot a single 22 sub. Can you imagine how quiet that would have been?

[@mrolsen6987]

Exactly what I was thinking!

[@r3dp9]

The 22 was having issues with the regular rounds.

[@spooks4771]

My thoughts

[@Kadeo-ms6qw]

@@r3dp9 bro it’s a bolt action, it would cycle.

[@Kadeo-ms6qw]

The issue with that is that it would 100% get stuck in the barrel/suppressor. Typically the max barrel length you should use .22 subs in is around 24 inches.

[@Thinker830]

Drake has his own gun🗣️

[@RasulAsanov-ey4fq]

😂😂

[@mordecaijackson461]

The good thing about this suppressor is that you can't miss. It's so long that it's practically in the enemy's face. Quiet _and_ accurate!

[@shanekhiu9884]

A Hitman’s dream!

[@rubbishnubbish]

"whats this hollow rebar doing here??"

[@barrymccaulkiner4232]

Why use a laser when you can have a 10 ft suppressor?

[@oldhillbillybuckkowalski]

If you load up the first couple of cartridges in each magazine with the little blue pills (Viagra) replacing the normal bullets it will fix your drooping problem. Just be aware that continuing to shoot it for periods longer than 4 hours may pose a serious risk and you should consult a Gunsmith.

[@alexandersadventuresoutdoo6393]

Solid joke lol

[@oldhillbillybuckkowalski]

@@alexandersadventuresoutdoo6393 thanks.

[@andressalas595]

Thank you James Buckley. Very Cool

[@Dru4ThaWrld]

Funnier than it needed to be

[@allothernamesbutthis]

Blue tips?

[@mozzberg590]

If you rested the supressor on a flat surface (like a long table) it should eliminate the curve in the suppressor.

[@TheFlyingZulu]

Yea but it would probably still have accuracy issues.. Having the barrel (or suppressor attached to the barrel) rest of anything throws off the point of impact. That's why all rifles now days have free float barrels.

[@johnsnyder1046]

That's what she said 😅

[@JohnDoe-qz1ql]

yes I thought of that to, a compensator for the droop, a straightener.

[@Masterofcreat]

@@JohnDoe-qz1ql an erection support sleeve, if you will😏

[@Frille512]

@@Cristiano_km How about no, god why is my text like this

[@1x1nDone]

Welp, it's not the longest anymore

[@adobochicken]

Matt went from wholesome KZbinr when he first started and now over the past couple of years has shown the real side of his humor. 😂

[@MrDfike]

Ya…. He has

[@JohnMkrv]

"will an erection, stop a 50 Cal?"

[@generalilbis]

It's those darn Unsubscribe boys! They're a badddd influence on Matt! 😉

[@jamesjross]

He's always had this sense of humour. Just doesn't get a massive erection on screen that often.

[@MrTPoops]

He's still wholesome tho

[@Penn.Dragon]

I've been watching this channel since before Microwave Mondays (If you know you know), and this has to be one of the funniest episodes I've ever watched. To see you go from "I don't want to get demonetized" to "Eff it" is fabulous.

[@abelwalker4396]

I know what happens on microwave Mondays 😈 “there’s poupon everything” 😂

[@luisap35]

Don't forget the trick shots with the shotgun and the random stuff he used to load

[@brewergamer]

#BringBackMicrowaveMondays

[@davidwester1508]

and the home made shotgun shells

[@alanledoux3386]

50 cal Friday

[@matthewhamilton7184]

I love how Matt always says “Place your bets in the comments below!” like he expects us to do it, but no one ever does. Matt, this is for you. I bet that the suppressor doesn’t break.

[@PMVoid]

Yknow what? I'll bet against you I bet it does break

[@clemi6739]

I can confirm that one of you is right

[@ok0_0]

Hmm. I'll bet it doesn't break either. Maybe if it droops it might but I bet it won't break.

[@Zincmentomint]

Thanks Matt, for listening to Matt.

[@carsonhunt4642]

I think most ppl know that creators ask for comments to boost the video in the algorithms. Kind of like when they put those stupid text things on screen for half a second , ppl then rewind a bunch of times and pause = higher video retention = boosted stats for the algo = higher views.

[@Bricksniper]

One could say it's "baffling" how the extremely long suppressors didn't just explode.

[@hillmanracing11]

That was what some may call a good one my good man lol

[@colineyeball]

One would only imagine an erection 69 links long would always explode 😉

[@trumps-a-hoe]

Why would they explode?

[@gregbegin9040]

Came to the comment section for this, not disappointed 😆

[@jamesbizs]

I mean. Why would they…

[@FurryStockings]

12:35 Imagine you're behind enemy lines, its all quiet, the enemy is waiting for you to make noise, and you had to put on your suppressors that sound like that lol

[@GashimahironChl]

If you're going for an armed raid behind enemy lines without any sort of gun oil to slather on your squeaky suppressor or your gun, you were probably asking for trouble anyways :P

[@timothychapman2840]

Its going to take 30 mins to get the gun into postition and youre going to be seen anyway. Imagine breaching and you traverse a corner. The baffle is going to get around 30 mins before you. Its like a yo momma joke.

[@SpeakingSpellSword]

@@timothychapman2840 ok but imagine the hilarity from the enemy POV. you see a suppressor start to pass by and prepare to fire, and it just keeps going for 5 ft before you eventually see the actual firearm and user xD

[@CadeRatcliff-cc8ht]

Oh my God your so right bra

[@Shiro_47]

Enemy: “Dafuq are they doing” *and witnessing a suppressor, rising

[@CadenBenny]

I think the reason you only got the baffle strike while holding it is cause when it was tied down, the barrel wasn't swaying. However, when you held it, natural slight bodily movements happened causing the suppressor to sway while the bullet was shooting causing the baffle to get struck. This would actually be a pretty cool idea to completely silence a .50 bmg if you had supports to keep the suppressor from swaying.

[@glenecollins]

Can you get subsonic.05 cal bmg bullets?

[@ScriptedLinks]

@@glenecollins There's little to no options for subsonic 12.7x99 really other than "50 Thumper" rounds that I've seen, they're supposed to shoot at 1050 FPS. Good luck finding any though lol

[@noahjkeely]

@@ScriptedLinks the fact you know the metric nomenclature of .50 bmg earned you a night with my small tiddy atfgf

[@capybara5879]

"yo hand me the 50 cal" "but we are on a stealth missio-" "*i said hand me the 50 cal*"

[@straubinio_styo7768]

Nice name

[@KJ-kw7gh]

This is the Demolition Ranch I miss, the crazy experiments and shotgun craziness.

[@MrDfike]

Agreed. Need more creative craziness like this!

[@decker9911hg]

agree. it seems to all be "look at this EXPENSIVE new thing I got, ft ANOTHER GUEST!" these days. I miss this type of content

[@gregorymiltenberger8518]

I want to see the bloopers, from this 1. Especially the part where Matt is trying to describe what their doing and keeping it clean. Also, hearing the giggles and laughing, from off camera, makes it funnier.

[@Sour_SkunK]

imagine filming for matt and not being able to laugh. i could not. mans a riot lol

[@michaelfox2433]

@@Sour_SkunK I wouldn't be able to hang out with him drinking a beer without laughing. Best genuine sense of humor on KZbin.

[@drigondii]

My wife called me when he got to the 9mm and told me to turn down whatever hideous sound that was.

[@footballcj58]

I’d be curious to see what happens to bullet velocity if measured with a chronograph as the suppressor gets longer and longer

[@Armin-ry9rm]

this is what i'm wondering.

[@thehuntertyranni7497]

We're on the same wavelength, the more you suppress the less velocity you gain.

[@hunter5822]

Also see how quiet you can get it. Using a hanger or barrel support so it doesn’t droop as much.

[@AsthmaQueen]

@@thehuntertyranni7497 yeah having that many baffles is gonna slow round down, and little .22 isn't gonna be going faster anymore, I suspect the .22 was dropping below supersonic and is why it got quieter

[@92juanreus]

When matt touched the baffles and some of them where "cold", thats the point of diminishing returns. All the energy you lose from sound and velocity is converted to heat in a supressor. If very little heat is being exchanged, probably very little sound and velocity the bullet is losing. But yes, it would be very interesting to see all that data 🤣

[@dannyarthurs4853]

The amount of supressor length is absolutely BAFFLING 😂

[@grimmthrashr1035]

thats what she said

[@seanbaker2971]

Very punny

[@triptank7857]

'Heh heh heh'

[@spanishpeaches2930]

See what you did there : )

[@thelordofguccii160]

Thelordofguccii follow me here

[@Absaalookemensch]

It's so efficient, it actually absorbs ambient sounds.

[@willemplatt948]

the strongest shape ever

[@benjamericana1088]

Active Noise Cancelling

[@Absaalookemensch]

@@benjamericana1088 LOL

[@beavisroadhog9629]

It makes the brown note.

[@Rudi_Gauss]

Imagine being on guard duty at your base and you hear a loud screeching sound, looking to your right and seeing special forces putting suppressors on their guns while looking at you

[@hf117j]

Lmao, shooting them not because they're your enemy. But because you want the screeching to stop

[@nunyabusiness8538]

why not just spray them down with wd40 or some

[@LupusMechanicus]

@@nunyabusiness8538 Wen the suppy gets hot the lubricant will carbonize and lock together.

[@TheRoflSandwich]

Suppressors on suppressors*

[@Ostsol]

@@LupusMechanicus Never lube your erection. Understood.

[@ricksmith7232]

I’d love to see a full auto run through one of these huge suppressors! Quality content as usual, keep it up man!

[@N8TheGr8M8]

Full auto would shred the silencer because of all the baffle strikes

[@jefeez7019]

Was exactly thinking the same XD

[@MatthewPettyST1300]

Maybe a full auto run might keep the pressure up and there for "Stiffer" and straighter for it's entire length. Peyronie's is now not a problem.

[@vesvius4561]

If you have seen a man do the helicopter

[@Hollow_is_cool]

dont listen to him hes a scammer, also im in VR well writing those comment🤣

[@minchkin8936]

Props to the camera man for maintaining composure for so long. I don't know how he did it

[@ik0148]

Im sure you can raise the camera above cover...

[@samuelhaverl5515]

By far, some of the best content on KZbin. Thanks, Matt!

[@heinrichmaneuver6871]

Any time dude, I do it for the fans

[@Tikuros]

This is the kind of content that brought me to the channel originally. More of this madness, please!

[@WLTR-]

Fr

[@adamkaas09]

Would've been interesting to have a noise meter close to the suppressor to see how much quiter it got with more thingies attached

[@Njazmo]

Yeah, decibel meter would have been a nice touch.

[@pai1238]

Lo tiene, se olvido de usarlo nomas.

[@seanhoude]

That and muzzle velocity.

[@pai1238]

@@seanhoude ese también, es verdad!!

[@ryanpeschel3562]

Scenario: You’re the lone survivor of your platoon. You’ve managed to find hiding behind enemy lines with enemy soldiers no more than 30 feet in any direction, and you know your only chance to make it home is with stealth and absolute silence. Your shots will definitely alert the surrounding 30 enemy soldiers. But you remember your Q silencer. It’s meant to be - silence is your plan to slowly eliminate them all 1 by 1. You’re ready. Your family runs through your head. Be silent, be still. Aim true. You begin attaching your silencer… 14:51

[@shoshuwa6509]

😂😂😂

[@GlassOfVitto]

Soldier 1: Why do i hear noises Soldier 2: I dunno, let’s just focus *more noises* Soldier 3: Hey do you hear that? Soldier 4: Yeah whats that Soldier 2: Not sure *an eternity of noises later* Guy: Finally i attached my suppressor The entire frontline’s mind absolutely having no idea what’s happening: *w o t* (I have no knowledge about military whatsoever so i might be wrong on some things) Edit: they probably sent a guy to investigate or smth

[@csar07.]

Thats just the call of the infamous DemolitionBird they wont suspect a thing

[@themaster3305]

Guy 1: You hear that?! Sounds like someone screwing on multiple 2 by 2 tubes Guy 2: Huh, might’ve just been the pipe men Guy 1: Guess so, even our suppressors wouldn’t make that much noise Guy 2: . . . Guy 1: Hey? You goo-

[@nordoceltic7225]

Its like a duck call for a very special kind of duck.

[@hlbaird5364]

Love the glockamolie. I have watched Matt’s videos for a couple of years now. His ability to keep the teenager alive in all of us is an amazing talent. The combination of science and shinanigans is priceless! He deserves his success!!

[@winowarrior9392]

As a proud Texasseean... Fantastic!

[@James_Edward59]

Glockamole* but I agree, that was a good one lol

[@normanmccollum6082]

I literally said during this video, while smiling, with absolute approval, "He is such a BOY!" lol Truly young at heart, VERY funny, but safe and responsible (at least to a reasonable degree lol).

[@falco5429]

copy comment

[@falco5429]

nvm my bad

[@kylemcm314]

I feel like glockamole is something Matt thinks of laying in bed at night, laughs about it for 69 minutes and then puts it in a video

[@Jacob-qv3dw]

People that never saw donut’s video

[@charless6136]

I feel like Matt has a Charlie Kelley dream book but instead of Denim Chicken and Hans Wormhat it's video intro ideas

[@BlueZirnitra]

@@Jacob-qv3dw and I never will so thankfully someone I like repeated it 👍

[@kimandherman]

the problem is when matt glockamole's himself when dreaming and he wake's mare up, wispering "dont tell mare"

[@JesusQaist]

Matt has finally achieved movie and video game suppressor noise level in IRL with the subsonic 9mm

[@necrosis125]

Dude that was some covert ops suppression I want one lmao

[@andrewdrummond3715]

I can appreciate this silencer company's self-awareness.

[@tridystudio5727]

bro is Whistlin Diesel but with guns

[@turbocateyeS475]

Whisltin Diesel is actually Demolition Ranch but with cars. Matts been doing this since Cody was like 11. Both awesome channels tho and when they collab its rad

[@Greg1096]

You would think the guy that was shooting through pipes to make bullets curve around corners would have known what was gonna happen 🤟

[@larryclare5677]

We do this all the time with our muzzleloaders(shoot around corners not play with our erectors)

[@michaelkissiah1450]

More people need to like this post. Because I was literally thinking the same thing.

[@beowulfsrevenge4369]

Q has a sense of humor. They definitely sent the right number of suppressor segments for suppression and to prevent deviation from the suppressor slumping.

[@AgnumMD]

I imagine they sent 7 suppressors' worth, minus the end cap. So each was really 70 pieces. Matt was just leaving that out for the sake of humor.

[@holdintheaces7468]

@@AgnumMD Given the names of all the Q products, I'm willing to give benefit of the doubt to them actually sending 69.

[@AgnumMD]

@@holdintheaces7468 Fair enough. I've never looked at their stuff.

[@robin92101]

Would have been interesting to have a dB meter to see how much more quiet it got.

[@andrewevans2835]

Honestly

[@OWN9494]

I was coming here to say this...like tf did u even do this for if you didn't have a dB reader on hand?

[@dpa1752]

Was there a benefit adding segments? To me the second one was noticeable after that I didn't hear any difference from the microphone.

[@Mydtys]

Yes but nah, this is a clown channel no fancy tests in here.

[@thebiggestbutthole]

@demolition ranch

[@lacehu]

Imagine trying to _assemble_ these on the battlefield, and trying to be as silent as possible (the "tactical velcro opening" jumps into my mind :D)

[@emkay1182]

Just bust out a loud ass fart! Then they wont hear u when u put the silencer on!!!!1111!!1!11

[@devilsproject248]

omg i love that clip

[@GrepidYT]

I love that at 19:30 it managed to catch a very cinematographic failure to eject

[@fafo635]

I didnt even see! Thats funny as fuck.

[@TheGunner11]

MKE quality.

[@LoveTheElectro]

We've grown old and gray together Matt and you still always manage to get an authentic, jolly, belly laugh out of me every video. Thanks for that. Truly.

[@TM69_YT]

As a fellow subscriber for many years, I am very happy to hear that you get a good laugh and enjoy the videos like myself! Cheers!

[@nicholasholloway8743]

Oh there's hundreds of thousands of us, I guarantee.

[@michaelpetras1613]

Upsets me He doesn’t use a table

[@SlickWorks]

every video 😆

[@jamesjross]

Yeah me too. There are only a few KZbinrs I've stuck with since the start.

[@mymarriedlife]

Matt, delivering good, wholesome family content like always. Really just a man for the people.

[@Zincmentomint]

Matt Carricker for supreme overlord 2022

[@OmegasAlphaYT]

The 9mm suppressor squeaks are like the sound your school chair makes when your teacher says to be quiet.

[@MihkelKukk]

🤔

[@JigginWithJordan]

I’m just sad because I have the same exact cans but mine will never be as big as Matt’s 😢

[@russellbelford1510]

No one's will ever be as big! Matt has the Biggest cans in Texas! 🤣

[@lesgobrandon9826]

Are you fishing for a 'nice cans' compliment? If so, Nice cans, bro!

[@TheJerseyNinja]

I was totally expecting you to use a decibel meter and record how much quieter it got each extra segment lol

[@xdragon2k]

Or a chronograph to see how much slower the bullets are after leaving that many suppressors.

[@saintqueso6946]

@@xdragon2k suppressor shouldn’t slow down the velocity at all

[@rhadiem]

You were totally expecting to be at a different channel then, right? :)

[@tigokooreman9912]

Suppressors should actually increase the amount of speed cause it is kinda a barrel extension

[@kolumbus445]

@@xdragon2k cod logic

[@hardin8311]

I burst into tears from laughing when he walked from behind the tree with a suppressor long enough to be used as a pole vault😂

[@dantethunderstone2118]

Would have been cool to see this with a decibel meter too so we could see how much more quiet it got

[@pai1238]

Lo compro, lastima que se olvido de usarlo!

[@sameo01]

Would love to see a version where the suppressors were supported. 🙌🏽

[@quest4adventure495]

5 more likes to 69 guys

[@MadMonk744]

@@quest4adventure495 We all dream of 69 guys right?

[@74_Green]

High-end Air Rifles often have barrel shrouds. These are, usually, made of carbon fibre and they screw on over the barrel proving support. Something like this would be perfect for this experiment. Fully silenced .50BMG maybe possilbe?!?!?

[@jwseibert1059]

I want to see what would happen if two barrels were threaded together muzzle to muzzle and a round sent through. Would you need a different twist rate to cause problems or would the second barrel's rifling from the muzzle be enough to mess the round up?

[@commanderwill2248]

He should do this

[@dan3458]

100% it would mess up the round abd the 2nd barrel. For them to be muzzle to muzzle the rifling in the 2nd barrel would be rotating the other way. It would be carnage.

[@brodiedippers3396]

Id watch that

[@Benson_aka_devils_advocate_88]

@@dan3458 Carnage might be a bit overkill. It would definitely damage the rifling in the second barrel if it had a large enough deviation from the first. But if a shotgun can take a 1oz slug through a choke without causing carnage I don't think reversing the threads would do much beyond striping the rifling.

[@JWQweqOPDH]

Twist orientation is constant in a solid object regardless of if you turn it around. Think about how a coil spring upside down still looks identical to right side up.

[@omegaentertainment1]

Shout out to Matt for leaving us a little bonus after the outro 😂 And shout out to those who watched until the actual end 🤘

[@memecream5834]

To all the people that watches the whole video

[@omegaentertainment1]

@@memecream5834 that's what I was trying to say lol

[@darkwingduck9704]

Can we just appreciate the creativity that goes into all of those intros.

[@PC_outdoors]

Dark wing duck it's a scam

[@thegrillagorilla1]

@@PC_outdoors I always read the comments to spot this kinda stuff, thanks for pointing that out!

[@armychicken4743]

He burnt the glockamoli

[@looselipssinkships6543]

Tbh i dont care for them. Some of them take up a third or more of the vids. Meh

[@alexmiller5796]

@@looselipssinkships6543 my issue is the amount of just horrible product Matt has and supports since they gave him money for it. I’m all for supporting smaller companies and businesses. But some do not deserve any recognition