Demonstrating how various Fifth Wheel Hitches work!

#rv #towing #trucks
Wife’s channel: / mrsbtbrv
Instagram: / bigtruckbigrv
Facebook: / bigtruckbigrv
Links to many of the accessories I review and use from etrailer!
www.etrailer.com/infm-big-tru...
RV Towing Upgrades
*Reese Goosebox Gen2: www.etrailer.com/Fifth-Wheel-...
*B&W OEM Gooseball: www.etrailer.com/Gooseneck/B-...
*B&W Fifth Wheel Hitch: www.etrailer.com/Fifth-Wheel/...
*B&W Sliding Fifth Wheel Hitch: www.etrailer.com/Fifth-Wheel/...
*Equalizer Weight Distribution Hitch: www.etrailer.com/Weight-Distr...
*B&W Tow and Stow Hitch: www.etrailer.com/Ball-Mounts/...
*Curt Drop Hitch: www.etrailer.com/Drop-Hitch/C...
RV and Trailer Equipment Upgrades
*RoadArmor Suspension Equalizer: www.etrailer.com/Trailer-Leaf...
*HD Shackle Straps and Wet Bolts: www.etrailer.com/Trailer-Leaf...
*RV Suspension Upgrade (travel trailer, Cargo Trailer): www.etrailer.com/Trailer-Leaf...
*16” G Rated Wheel Tire Combo: www.etrailer.com/Boat-Trailer...
*Goodyear Endurance 15” Trailer Tire: www.etrailer.com/Tires-and-Wh...
*Goodyear Endurance 16” Trailer Tire: www.etrailer.com/Tires-and-Wh...
*Furrion Wireless Backup Camera: www.etrailer.com/RV-Camera/Fu...
*Furrion Wireless Side and Rear Cameras: www.etrailer.com/RV-Camera/Fu...
*Phoenix Electric Trailer Jack 4,000 lbs: www.etrailer.com/Trailer-Jack...
*GlowStep Revolution Steps: www.etrailer.com/RV-and-Campe...
*LCI Solid Steps: www.etrailer.com/RV-and-Campe...
*LCI AutoLeveling System: www.etrailer.com/Camper-Jacks...
*Reese Fifth Wheel Dual Motor Landing Gear: www.etrailer.com/Camper-Jack/...
Must Have Equipment!
*6000 Watt Generator Kit: www.etrailer.com/Generators/e...
*3200 Watt Inverter Generator: www.etrailer.com/Generators/e...
*2000 Watt Inverter Generator: www.etrailer.com/Generators/e...
*30amp to 50amp Power Cord: www.etrailer.com/RV-Wiring/Mi...
*LED RV Replacement Taillights: www.etrailer.com/Trailer-Ligh...
*Fastway Tire Chocks: www.etrailer.com/Camper-Jack/...
*RV Foam Sprayer: www.etrailer.com/Car-Cleaner/...
*RV Soap: www.etrailer.com/Car-Cleaner/...
Truck Upgrades
*Airlift 5000 Airbag Kit: www.etrailer.com/dept-pg-Vehi...
*Airlift Wireless Air Controller: www.etrailer.com/Accessories-...
*Access Toolbox Bed Cover: www.etrailer.com/Tonneau-Cove...
*Bedrug Bed Liner: www.etrailer.com/dept-pg-Truc...
*Floormats: www.etrailer.com/s.aspx?qry=F...
*Etrailer.com is the official sponsor of my channel. Equipment reviewed may have been provided by them as part of that sponsorship. All reviews are honest and unbiased. This channel is for entertainment purposes, and you should always do your own research prior to making a decision!
Sponsored items may be in this video. Always research multiple sources before making a purchasing decision. As an Amazon Associate, I earn commission from qualifying purchases.

[@MikeC19100]

This was a video I wish I had seen before buying our first Fifth Wheel (FW) Hitch for our 2019 Ford F-450 truck. The dealer talked me into buying the Reese 27.5K hitch for the truck that included the OEM puck system and a 3 inch receiver. While we didn’t have any serious issues with the towing of our 18,500 pound FW, I did experience some issues with hooking up or disconnecting the truck from the FW. Additionally, I have arthritis in both shoulders and that also created discomfort during hookup/disconnect processes. We eventually bought the B&W Companion 25K FW hitch and I have to tell you that it was a night and day difference. The B&W is so smooth doing either operation and I have had zero issues with my arthritis using that hitch.

[@vandersnickmcduffle7333]

I like B&W because if the jaws are shut and the pin is in, it's good to tow. No question about it. No need for color codes etc.

[@thesnottynosekid9985]

⭐️The Reese Pro Series is auto locking, you leave the handle in and unlatched so when you back into the trailer the handle comes out and snaps back in on its own. I've been using a Reese 16K Pro Series Slider to tow my Chaparral and my Reflection 31mb for 5 years now and its a great hitch.

[@otway00]

Worked for 17 years selling hitches. B&W was my favorite due to quality, next was the Reese/Drawtite line. Tried to avoid Curt due to numerous quality control issues at the time. Only had an issue one time when a customer was using a 5th wheel to tow a multi car trailer. He overloaded the system and claimed the 5th wheel was defective. The 5th wheel pulled out of the truck frame and all the bolts used to install the 5th wheel were still intact with the red slip marks we put one all bolts still lined up showing they had not come loose. Owner claimed he had not overloaded the trailer, the hired driver ( whom the owner fired ) told us that owner over loaded the trailer and ordered him to drive it anyway. We told the owner to go make a claim with his insurance company. Last I heard, owner never got a dime and had to pay for all the damages out of pocket.

[@scottmacglashin3059]

I really like my Curt E16. Love the sound of the lock engaging when hooking up.

[@Augiebracerofam]

Nice to demonstrate products side by side. I think that another advantage of the budget line is that it would weigh less than a comparable capacity full features assembly. Thank you for sharing and have a great day.

[@rjterry21]

Q and A series have a completely different head mount design as well. Love my Curt A25. Simple and reliable. They all autolock.

[@John-te4nu]

I like the Puck system because when you're done can be removed so you can use the bed

[@dkhill27]

This is why I love my B&W Companion hitch. Drops down in my B&W gooseneck hole. Tighten up the draw bolt and then 4 bolts. Install the head and your good to go. Pulls my 12k 5th wheel just fine. I use white lithium grease on the 5th wheel plate and jaws.

[@camperbum]

Hey, I was wondering how the 5th wheel Attaches to the goose neck ball Maybe you could do a video showing how that works.

[@jamesharrier6633]

I have the Curt Q24 and have had it for 5 years now. Not one problem at all. It fits the pucks of my 2017 3500HD perfectly. I would rate it at 100%.

[@jnich17]

I have been running the Demco Recon now for 5 years and love it. The main reason I purchased it was I wanted a clean bed in my truck when not towing. It is easy to install and I pull an Avalanche 382FL which is 42 feet long and gross weight of 16000 lbs. Hitch weight of 2800 lbs. I have had no problems with it and I have a regular bed on my Chevy.

[@mariobrothers8348]

What! No Pull Rite

[@Propnut48]

I’ve had a Curt A20 for about 10 years and love it. Has a green , yellow and red indicator that tells you if your locked or unlocked or not quite locked. This is my second truck with the same hitch. I have a short bed now so I need to replace the mounting sides to a slider mount.

[@leftturnaudio5678]

Love my Demco Recon. Pulls my 42 ft Cameo with confidence.

[@jgatsby673]

BigTruckBigRV: “You guys sell faux king pins? Etrailer: “Sure do” BigTruckBigRV: “That’s weird….” ***silence ensues***

[@michaelmartin9335]

I really like my 21K racon, it is mounted on a set of rails. I chose this because the swivel head comes off it's about 35 lb and then the bracket on the bottom is maybe 40 lbs easy for a 71 year old to remove. The locking mechanism is exceptionally strong and there is no question as to whether it is locked in. And no need to use a step to lock and unlock it I can reach it easily.

[@stevewithavision]

Great explanation

[@Billsadventures13]

Good info, trying to decide which way to go

[@tommcl386]

Great video for a newbie 5th wheel owner.

[@iglapsu88]

Thanks JD!

[@dannymacnevin3939]

Interesting video. I have a 20K Reese M5 hitch in our Dually, and the jaw is a little different than the one in this video. It seems to go across further, and has more meat to it, but I got it for our Puck system in our 2022 RAM, and it works well! The only thing I dislike, is the little plastic indicator they have that shows green or red when you're connected or disconnected. Right from day one, it pops out of place and gets stuck between green and red. So I always ensure the jaw is closed with a quick visual check from behind, and that my locking pin goes in with no trouble.

[@markmcalister3746]

Great vid . . leaning towards the B&W although like the look of the Curt

[@ryanholmes2248]

Having a 6.5' bed I tried the B&W Companion. Didn't like the slide as you had to get out to unlock and with weight it was hard to slide and jarred the truck to lock in the back. I switched to the DEMCO autoslide, love it. Only downfall is getting used to the jerking when the unit is rotating back to straight, but can do a nearly, to full 90 turn (all dependent on your pinbox and front nose style)

[@RamblinRoadies]

No PullRite?

[@ralange69]

I have a Demco auto slider and the pin clamp is the reason I bought it.

[@servicetrucker5564]

That Demco looks nice. Just like a fontaine no slack

[@davefields4591]

I have Curt Q24 and I Love it

[@Masterchief68]

I like the way the curt fingers wraps around the pin. Like the extra bar coming across on the Demco, looks real safe. Would not feel safe towing with the B&W because the fingers only touch each other.

[@zackeryyochum2937]

most semi with wheels have the same B&W style jaw been driving semis 11 years zero issues. And I have the B&W hitch in my f250 2 years zero issues.

[@slaytanic921]

They won’t be coming apart once they are locked in. I’ve towed 5500 miles with mine this year, First of many to come.

[@LordFalconsword]

I bought the 26k B&W Companion, and have never regretted. Built like a tank, super simple, all but impossible to not have a good hitch. It is "Possible" to high-pin it, but you'd have to pretty much ignore the fact that your hitch isn't sitting on the plate.

[@powder600]

I have the A16 in my 2017 Ram 2500. I like the hitch. Only issue is at times the jaws won't lock. There is a Red/Yellow/Green indicator to let you know your ready to go. Hard to get it to go green sometimes. I have started "exercising" the jaws with a piece of wood before I hook up. Seems to help. The hitch is rubber mounted like an engine mount and tows nice and smooth.

[@norad848]

I have a 16K Husky 5th wheel. It’s similar to the Reese pro series. Not sure if it’s meant to, but I leave the jaws closed when hitching up and the angled edge on the outside of the jaws opens them up and snaps back closed when the pin meets them. Then I make sure they’re locked and pin them before driving off.

[@winginitwithjohn8451]

No Anderson hitch?

[@brianb-p6586]

Andersen does not make a fifth-wheel hitch. They do have ball hitches that mount in the truck bed, including one system which they call the "Ultimate 5th Wheel Solution"... meaning that using it *instead* of a fifth-wheel is supposed to be the solution to the cost, complexity, and weight of a fifth-wheel.

[@winginitwithjohn8451]

@@brianb-p6586 very accurate, well said.

[@tangydiesel1886]

The demco is made similar to a large truck 5th wheel with the locking bar.

[@Ezrasideas]

I like the curt over b&w because the jaws overlap. I have seen a few people have issues with the b&w jaws get sloppy and not fully close

[@teresacoppedge4109]

Thank you.

[@alltruckedup2024]

I really like my Curt Q25.

[@mattheww1429]

Do one about the pullrite autoglide. I love mine. I don't get why anyone would buy a manual glide hitch.

[@mariewhite7893]

We have the Curt Q20 slider. The dealer installers put the wrong hitch in. We were supposed to be the Reese none slider. Have a 8ft bed. After being there for about 4 hours for the install. They discovered the mistake and wanted to change it out. We told them no. Your problem and left with the Curt hitch. It also came with the fake kingpin.

[@michaelthompson3679]

Wish you review the trailer saver hitches!

[@josephsouza9951]

Would be nice to do a review on a Hensley Trailer Saver fifth wheel.I made up a tool for my shop to test fifth wheel play for our tractors.Class 8 fifth wheels are adjustable, which we checked at our PM interval .I welded a flat plate on a trailer king pin centered to the plate the width of the fifth wheel with handles two handles on the top so once you engaged the king pin in the fifth wheel you could remove it .You could build the same for a camper fifth wheel, the king pin are the same diameter.

[@justinm9126]

He did the Reese pro fifth wheel hitches wrong they are auto locking you’re just supposed to back your fifth wheel into the pins and they will move out of the way and then lock around the jaw opening it up first is the incorrect way I only learned this one I bought my first hitch years ago after reading the owners manual

[@thesnottynosekid9985]

I just commented this, maybe ill make a video and put the link in my comment.

[@coreymerritt7742]

I would pick the b&w all day long 👍

[@tomperley8399]

Good video as usual. I am going to throw one at you that you might want to cover, as I had to figure out out by myself and the documentation is, well lacking a lot. I upgraded tow vehicles and got the dealer to throw in the RAM OEM 5th Wheel hitch, which is the Curt Q30 in Sheeps (RAM’s) clothing. My trailer is equipped with a Sidewinder Pin Box. While reading the owners manual for the hitch, I found a small box warning NOT to use this hitch with a Sidewinder or other rotating pin box. I did further research and could find little information other than the warning, not a reason why. I gave it a try and discover that the pin box was torquing The Whole hitch plate. A quick re-group on my part and swapped the RAM hitch with a Curt A20, which was a quick swap. It would be nice if you or eTrailer could actual do a demo video to save someone else the trouble that I went through.

[@philsalsbery9994]

For 5th wheel towing, I have a 2017 RAM 3500 Mega Cab Cummins SRW with the short 6'4" bed and Ram Boxes, so I had to use the Reese 19K Sidewinder pin box recommended by the folks at e-trailer along with the Reese 20K 5th wheel hitch mounted on bed rails, as RAM will NOT install their 5th wheel puck system in a Ram Box equipped truck for fear of a standard 5th wheel pin box impacting the insides of the Ram Boxes when turning sharply. That Reese 20K hitch is a beast and handles the Sidewinder well as it was designed to manage it. My only issue is uncoupling due to the wedge on the pin box at times. The truck needs to be nearly straight to the 5th wheel, to uncouple easily. Otherwise, I need to use a rubber mallet to gently tap the pull bar a bit to loosen the jaws. Aside from that, this package provides a safe and confident feel while towing. I highly recommend it for those of us with Ram Box trucks while towing a 5th wheel. I tow a 2018 Legacy Montana 39 foot 5th wheel at 15K pounds loaded up. Reese Sidewinder pin box on Reese hitch, works great! I've been after JD for a video on the Sidewinder pin box for years, but he resists as he sees the Sidewinder as somewhat unstable with the pivot point being 22 inches back from the the rear axle of the truck. Would a company like Reese make something unstable? I've experienced 15K+ miles with the smoothest towing ever along with superior handling upon backing.

[@roundpeg3239]

Please do one on the various hitches now. Such as flex air moreride etc. You do a lot of gooseneck stuff but not much on the traditional pin styles

[@tedsheldon11]

I have a demco. It works in the Cam flat bed perfectly not many options there. Tows pretty well. Wish you had showed the articulation of each model.

[@jgatsby673]

Well looky looky…finally first!

[@chadsteele1]

A hundred years from now ppl really gonna remember too! 😃

[@jgatsby673]

This is my legacy now

[@Cannonbradford3505]

What is your thoughts on the pullrite super glide

[@daveb3599]

I have yet to find a better fifth wheel hitch than the Trailer Saver. Once you get one nothing else can compare.

[@0707moto]

Love this content can you do some on hitches for travel trailers thank you

[@slaytanic921]

Like weight distributing hitches?

[@CPTTango30]

1:37 So what you're saying is that Curt quality is going to tank and the warranty/ support is going to be good for nothing. Got it.

[@garyschulte859]

What about the Pullrite hitches, especially the auto slide models. Or does eTrailer not sell them?

[@RDLouks]

Enjoyed the video, but for my money (and peace of mind) I will stay with my Demco Hitch. I have a 2016 F-350 Short Box with the Demco Autoslide and would not trade it for any other hitch I have seen. Call me paranoid but with the locking bar on the Demco I know my fiver is secure and will not come loose. But as with everything else it all comes down to personal preference.

[@alanprice1037]

Are you still in Wentzville? I’m local and would love the chance to meet you and show you our new rig. I’ve been a fan of your videos for a long time. 👍

[@whatworksforme5749]

Please review the automated safety towing system

[@thefirstlazya]

Would have liked to see the Demco auto-slide

[@brianb-p6586]

Sliding systems would be another whole video - despite a couple short mentions of slides, this is really about the coupling mechanisms. Mounting systems - rails, pucks, ball-anchored - could be another entire video.

[@roncreach753]

What about maintenance on these 5th wheel hitches? Do you have need to greese them?

[@augustinboyd9626]

Even though I'm selling my 5th wheel and hitch, I bought a 25 thousand pound hitch to wings toy hauler with toys in the garage

[@gladysrouleau6229]

We just bought a truck and we are planning on purchasing a 5th wheel RV. We would like a hitch which would be easy to know, that we know, that we know that the hitch is connected properly and that does not require a lot of physical strength on our part. Our vehicle is a RAM 3500 dually. Which one or ones do you think we should take the closest look at? Some of the RV's we are looking at weigh around 19K dry weight.

[@aaronsbarker]

I run a 30k Reese on my F-550. They do auto-lock, you just leave the handle in "locked" position with the flip-down latch released and back into the pin. Only thing I don't like is that the latch can get hit by 5th wheel pin plates that are larger than the pin box and replacing it is a P.I.T.A.

[@MatthewSerta1]

Im ordering a new truck, and im trying to think practical. I don't NEED a long bed for every day use, But I do want to get a fifth wheel.. Im looking at slider hitches.. Do I NEED a slider hitch? And which is the best for an automatic slider that will slide automatically when you turn, without having to unlock it.

[@darren6790]

Is a slider required for a short bed truck. I do get in tight spots where I really need to crank it. I’m getting a new toy hauler.

[@TheDesertdawg1]

No Blue Ox ? The only rocking hitch (not a slider) for shortbeds. I love mine, smooth ride, and the locking jaws are definitely killer. BTW, you missed the perfect opportunity to show what high hitching is with those closeups.

[@whatdoyouthinktodd]

I have a question I have a GMC 2500 HD 2010. I tow a Viking 17bh. And at work there was an argument about it. That I needed a weight distribution hitch to tow this little trailer. When I pulled it with the Acadia I used a weight distribution hitch. What about with this truck It barely moves the back end of this truck, What do I do How do I fix this argument? Please answer Thanks JD.

[@theartsunnyshow2748]

The video was good but you forgot about the pullrite 5th wheel systems the super lite series where there’s a ball that. Drops in. Way easier been using mine for years.

[@johnlowry5311]

I been thinking about buying the Anderson hitch. I have a ford 2013 F350 with a B&W gooseneck. The reason why I was thinking Anderson Hitch is weight. I have bad back.. Do you or anyone else know anything about them

[@novavroomvroom3435]

I have a 2007 E-450 cab and chassis..( yes it's a van ).. I want to get a FIFTH WHEEL for a gooseneck and prefer to be welded and bolted on to the chassis... What can you recommend for this setup....???? I'll be purchasing a sleeper to go behind the cab so a FIFTH WHEEL would work great for hotshot delivery...!!!!

[@cindiford3777]

Do the hitches all have anarticulating head?

[@Frontpagefab]

Regarding the reese Pro series, your statement that it is not autolocking is not correct. I was sold this one when I got my first 5er, and accidently discovered that they are auto locking. Basically you can leave the lever in the closed position with the safety latch open, then back into the king pin. The jaws/arm open then close behind the king pin. At that point I simply get out and close the safety latch and put my pin in then do my tug test to make sure the 5th wheel is locked and secured. I don't know if this is by design, but this is how I have done it for 5 years now. Someday, I'd like to move up to a goose box and get rid of the 5th wheel plate all together.

[@Rocketman6500]

Can someone help me I bought a Reese hitch but there’s no handle ? No sure how it’s going to lock and unlock

[@Morotak123]

The sidewindsr is probably the best hitch design bar none, no real weight change compared to those damn sliders and ots all automatic. Hook it up and go.

[@johnsanford4569]

TrailerSaver BD5

[@jennamacias8123]

What about a Anderson 5th wheel hitch. I have one and would like to know what you think about it.

[@brianb-p6586]

No, you don't. You may have and Andersen, but it's not a fifth-wheel hitch.

[@bill29456]

You failed to mention the added weight of these fifth wheel hitches. They take away form your payload capacity. Plus they are heavy to remove if you need to use your truck bed. An Anderson hitch is a fraction of the cost and only 35 lbs. But rated to pull more than a fifth wheel.

[@brianb-p6586]

Fifth-wheel hitches come with various trailer weight ratings, so it is ridiculous to say that one product is "rated to pull more than a fifth wheel".

[@rumaabba8875]

Purelite

[@davidpayne6568]

Video for install

[@caseypries7559]

I'll take my Demco auto slide over those manual slides any day. I also feel the Demco single jaw latch is superior to double jaw latches. To me the curt stuff looks cheap so it should fit in nicely with LCI's other products.

[@eliahsmith9512]

What size fifth wheel will I need for a diamond c 40,000 lbs GVWR trailer?

[@BigTruckBigRV]

A Gooseball

[@C69FH]

No coverage on the Andersen Hitch???????

[@raymondherbst7126]

No Reese Goose box comparison?

[@brianb-p6586]

It's not a fifth-wheel. They could do a video about the various in-bed ball hitch systems.

[@sonnydayz2118]

I'd love to be sponsored and, in turn, promote these hitches for my business? I haul livestock and etc.

[@frankthill6163]

I just contacted e-trailer and they will not sell any items retail at the VCC unit. Do not try to stop there and purchase anything. The rep said it has been closed since covid. I posted a link to this video and was ignored.

[@BigTruckBigRV]

Interesting because during the actual filming of this video and just about each day after there were people shopping in there.

[@frankthill6163]

@@BigTruckBigRV I was able to purchase the b&w companion slider hitch from another dealer locally here in St Louis for the same price so no harm done. I was just surprised how adamant she was in stating that they no longer did that. I specifically said big truck big RV and JD just did a video there and it didn't make any difference. My son also called up there 6 months ago to pick up some sumo springs and was told the same thing. Go figure.....

[@davidmilhouscarter8198]

11:15 It really concerns me that there is a “budget fifth wheel hitch“ made with thinner metal.

[@brianb-p6586]

Why? They can all safely handle the rated trailer weight, and most trailers are not even close to the capacity of the lowest-rated fifth-wheel hitches. "Budget" is more about convenience features than strength.

[@traveldawg]

I'm afraid your bias toward B&W clearly shows in this review. Of course, that is what you have, so maybe you are drawn toward it. But I think DEMCO clearly has the best clamp around system than all the others. The B&W clamps with 2 jaws and the opening is in the most prone area to open (at the rearmost portion of the clamp), and, after watching a buddy use his, that whole clamping action when connecting is goofy in that the handle has to be pulled to be sure it has clamped; the other hitches aren't like that - they click and lock with a much more positive display. DEMCO's clearly goes all the way around the pin AND has that extra bar at the rear. I don't think it is any more complex than the B&W or the Curt. I do not think everyone will understand that when you speak about torquing the DEMCO it is because of the use of the goose ball connection - every goose ball hitch has that issue - even the popular (and problem prone) Anderson. A puck system doesn't have that issue. None-the-less, thanks for the side by side comparison, it was a good one.

[@dongemus]

I wouldn't call it 'bias' when he says "This is one of my favorites". He's not hiding anything or being biased by saying it's the best or anything like that. Just having an opinion like all of us.

[@406Linetrash]

I’ve never sold a hitch as fast as the Demco. It makes so much noise with that setup. The wrap around makes great contact. But there is play in it. So it moves back and forth and contacts that safety bar. I’ve never had a hitch make so much noise.

[@ChronicBongitis420]

"Worldwide global"? Seems kind of redundant.

[@BigTruckBigRV]

Yeah, sometimes ad hock interview causes non-perfect grammar.

[@malcolmmannix6694]

Good video but you rave on a bit

[@BenChutes-ry8sq]

I'm buying a used single axle semi truck to pull my fifth wheel camper how do I install a hitch on the semi frame