DentalCAD 3.1 Rijeka, Mockup + Virtual Waxup video tutorial

The indication "Mockup" is a great tool to design a clip-on or a virtual waxup.
This workflow performs a hard cut to the model after you finish your design.
That gives you the freedom to design a beautiful thin mockup,
without needing a preparation, margin line or minimum thickness.
00:00 - Intro
01:33 - Virtual Waxup Bottom
02:18 - Place Tooth Models
03:40 - Free-Forming
05:01 - Connectors
05:18 - Generate Virtual Waxup
05:37 - Hard Cut
06:13 - Recap
06:34 - Advanced Options and Parameters
08:47 - Bottom Properties
09:58 - Blocked Out Undercuts
10:29 - Outro
1:1 Training: shop.exocad.co...
DentalCAD: exocad.com/our...
Mockup Model: • DentalCAD 3.1 Rijeka, ...
exoWiki: wiki.exocad.co...
Demo Sample: "Smile Creator / Mockup"
German version: • DentalCAD 3.1 Rijeka, ...

[@ervanyang1507]

Your sharing has been incredibly helpful. I greatly appreciate it and have gained a wealth of knowledge from it. Thank you!

[@exocadvideos]

Thanks for sharing. You are so welcome!

[@milesgti]

Amazing tutorial. Thank you so much.

[@a1gle]

I have exocad 3.1 I made a mock up design my patient loves it so much I want to use exactly the same design after preparation please how should I do it? Is there any tutorial?

[@exocadvideos]

Hello @a1gle, this is easy, just duplicate the case including the tooth library. Then change the indication, save and start the design. Your setup will be imported automatically. As you can see here: kzbin.info/www/bejne/j3K3nWR_fa9rjLc

[@juliekwon2267]

Once you have designed the mock up, I am confused how to ONLY print the snap on mock up and not the merged wax up on model. Could you please clarify or is there a video on that already?

[@exocadvideos]

Hi @juliekwon2267, How to design and print only the mockup you can see in this video: kzbin.info/www/bejne/r2bFfqajjZpmj68 How to print the mockup merged with the model we show in this tutorial: kzbin.info/www/bejne/rJfNmXmXjclledU

[@vamshikrishna5135]

Hello exocad! Are there any trainers who teach basics to advanced in south india

[@exocadvideos]

Hi @vamshikrishna5135, our resellers provide their customers with extensive software training and support. You can find a list of certified trainers here: exocad.com/our-partners/training-support

[@taiyaki6938]

Thank you for the nice tutorial. Can we use make this snap on mockup based on a manual wax wax-up model?

[@exocadvideos]

Hi @taiyaki6938, yes, just select "Pre-op model" as additional Scan under "Options and Parameters" in the Dental DB, adapt your setup to it and following the workflow you saw in our tutorial.

[@mostafamansouri9088]

hello Mr please guide me to how can i design one crown by two customize abutment thanks

[@exocadvideos]

Hi @Mostafa Mansouri, this is a perfect example of why creating a "Virtual Waxup" helps solving difficult cases. One solution could be the following: First you select one "mockup" as indication and setup your design. Second you reassign the indication to waxup on both abutments and restart the design to use the virtual waxup to finally adapt this one design to both margin lines.

[@evanuijtert]

can you do a mockup and export this with the standalone version of exocad?

[@exocadvideos]

Hi @evanuijtert, No further modules are required. All you need is the core version of DentalCAD Galway, Rijeka or higher to design and export a mockup.