Mustang gt gets 4.56 gears and wow what a difference!

[@nickschmitz7044]

GEARS make the world go round!!! I've ALWAYS been a BIG fan of gear changes. I had a 1984 straight axle 4×4 Toyota that I put 5.88 grars in and ran 44 inch boggers and it would smoke the tires off the rims if you wanted it to and yes it still had the original 22R 4 banger

[@eddiespagetti8395]

Wow. Really ? 44s turn with a sew machine motor ? That's big boots to move Damm cleetus

[@brysonbrown6107]

I had 4.30s in a mach 1 fbo built rear end with a flywheel/clutch combo daily drove for 3 years never had an issue, went 12.4 consistently

[@NarxolepticCustoms]

hell yeah man!! Gears make the biggest difference on these late model cars!

[@harleyed6830]

4:10’s are very street able as a daily driver, highway or city, not to mention fun too !

[@hotrodlincoln7186]

Quick question 🤔 would you know what my top end speed would be if I go with 410 gears. Recline is 7k for me. Top speed says 120mph, but it is goverd at 110 to 112 mph. I want to be able to go at least 140 to 150. Top speed.

[@Matteo-xm6xo]

Hell yeah!make a slow car go! Stock gearing was always for mpg. Thanks for the video

[@DGGarage]

Thank you for watching!

[@Dale37]

Can't imagine running that gear in a car that spends much time on the interstate. I would like 4.56's in mine but it has 3.73's instead.

[@paulm6481]

I love this video. You convinced me. I am going to put a 4.10 on my 2014 Mustang GT.

[@DGGarage]

You will absolutely love that choice!

[@zachattack2016]

thing is you want to put atleast 500 miles on it before you start beating on it

[@P71ScrewHead]

i think it was for video reasons, i hope..lol But yes, better to be safe than kaboom..lol

[@jesscneal]

Nice looking pattern. I suck at gear setups :) Looks like a ripper 👍👍👍

[@DGGarage]

It’s definitely a ripper now! Can’t wait to hit the track now

[@SloppyMechanics]

I had 4.10 in my daily 2vand it was perfect

[@DGGarage]

Hp tuner support the 99-04 now so I might play with that and try to get a little more out of it. I heard there pig rich at wot but 🤷🏼‍♂️

[@snowfreak207]

@@DGGarage that's good to know

[@midnight347]

@@LeRon-TheCon-Jon-jj8hj gears won't hurt mpg except on the highway it can even help mpg up to 50-60ish. Even on the highway you won't lose maybe 2-3 mpg max compared to stock gears. Don't fear the gear.

[@brendanmccarthy492]

I have 4.10's in my project now. Got a th400 trans with 28x15x10.5 slicks. Want it to be a 1/8 mile. Would it benefit me better if I have the 4.56?

[@Robyne_u61]

4.10s is nothing how people say they are, they are not even that aggressive would have gone 4.30s

[@LA_Commander]

I put 4.10s in my Explorer with the 2V 4.6L and it makes for a great daily driver. This heavier truck chassis needs more gear as I only had 3.55s stock. On the highway, revs aren't bad. At 70 mph my rpms are like 2300 in overdrive. Not bad!

[@MrDerekRobinson]

That's high. I know this is an 8 month old comment. What you were thinking is not bad simply based on rpms, it's terrible for cruising long term for 1 main reason. Coolant temps. Something you're not going to realize unless you go down the road with a digital coolant temp read out.

[@LA_Commander]

@@MrDerekRobinson I've never had any cooling issues with this vehicle since I put the gears in. And it's been 5 years now.

[@james2lit]

@@LA_Commander how’s she doing now still good ?

[@LA_Commander]

@@james2lit still runs great 👍

[@okhotrodder]

I have 4.56's in my '65 stang and love it. I cruise at 3k rpm going 80 with an aod and 28" slicks. Been this setup for yrs with no issues. I built the aod when I put it in with a 35 stall. When the roll control is on, the front tires slide. Seems to not matter how hard I pop it, can't keep them stuck.

[@DumbldorWizzard]

You drive a manual right? My auto Mustang has 4.10 and revs at like 3600 at 80

[@paulciprus9582]

I put 4:10 in my 03 SVT Cobra and absolutely love it...people say...oh that’s too much gear ...whatever..I can get 100 mi to a 1/4 tank..makes 640 to the tire...🤣🤣🤣

[@DGGarage]

Hell yeah that’s awesome! I love trying stuff that people say want work or is not right. Your car sounds very fun!

[@madfun510]

@@DGGarage man the 410s ain't no joke got em on my 99 gt

[@ericksanchez7787]

Tell those people that say 4:10 is too high needs to do some research my explorer has 4:10 from factory

[@lanewarriorillridez3739]

@@ericksanchez7787 yep and so does my 01 5.0 v8 Mountaineer Premier and 08 6.0 LS2 Trailblazer SS, however them transmissions are calibrated differently for truck applications.

[@Esqueda7]

Which would you recommend running, 4.10 or 4.30 on a manual 2013 GT with cobra jet manifold. Currently have 3.73 but I don’t like it. I want it to pull hard as hell of the line and every gear.

[@freddieshields5697]

In my 90’ foxbody daily driving wasn’t bad, but worse than other car’s because I took the interstate with that car. That’s what people don’t talk about test/videos, I’ve had a car w/4:56’s but my trip 12 miles and speed limit was 45mph. The best all around would be a 3:55.

[@hotrodlincoln7186]

What about going from 327 gears stock. To 373 gears.

[@Celticman197]

@@hotrodlincoln7186 I have 3.27 gears with a 347 stroker. Thing cruises at 90 mph at 2500 rpm.

[@mercury0214]

Trying to get 4.56s on my mountaineer right now that all wheel drive and 4.6 revving high gonna be nasty lmao, nice video and nice car bro

[@LA_Commander]

Just make sure your front and rear ratios match

[@jermaineclark2670]

“I lost my fucking impact” lol me😂

[@RimshotsandNamaste]

..put a t56 with 2.97 1st and 0.50 6th. This is what I'm going to do!

[@tonzel1]

Bruh! Here I am doing my normal KZbin thing and clicked on this vid not knowing it was my boys! Lol I subbed guys! Nice!

[@DGGarage]

Lol you found me! I enjoy doing videos! Thanks for subbing brother

[@tonzel1]

@@DGGarage It looks like your enjoying it. I enjoyed watching. Keep it going!

[@millerkiller6496]

I want to try running 3.73 on a Grand Marquis. You know how they come with 2.73 gears from the factory. I had an 02 Grand Marquis and I could get up to around 90 mph in second gear. It didn’t have a problem getting up to such speeds. It still had no problem getting out of its own way in general. The higher rpms would occur at too high of speeds is what the problem was.

[@Celticman197]

Yeah, who wants to be running at 3000 rpms for a 1/2 hour on the Interstate at 70 mph. Lot of unnecessary wear on the engine.

[@Celticman197]

And who actually stays at 70 on the Interstate. Half the time you will be pushing 80-82, and that will result in some serious rpm. Plus hearing every rattle in the entire car.

[@snowfreak207]

I just put headers on one of them cars this week...what a pain in the ass

[@DGGarage]

Dylan Turner yes it is

[@setharnold3699]

Was it worth it?

[@P71ScrewHead]

@@setharnold3699 you bet your ass it is, longtubes FTMFW!!

[@HAL-dm1eh]

Little known fact about these automatic equipped 4.6 2v's is anything below at least 3.73 won't improve your 0-60 time because while the stock gears will have you go all the way to or past 60 in 1st, a shorter gear will have you taking the time and power to change into 2nd and then pull in 2nd just before, which slows down anything you would have gained. So if you have these AOD/4r70Ws, you need AT LEAST 3.73s to improve that number if that's your goal. I will say that anything is better than the stock 2.73/3.08 power killers when it comes to overall drivability though.

[@hotrodlincoln7186]

So, would you suggest I go with 3.73's or 4.10's. Mines the 4.6 2v with 4r70w trans.

[@HAL-dm1eh]

@@hotrodlincoln7186 That depends on what's more important to you, acceleration or highway cruising speeds? One of those will give you an edge over the other in one or the other. I used to have a Panther and also given my experience with an F150 I used to drive with 4.10s, I wouldn't hesitate to put those in it.

[@hotrodlincoln7186]

@HAL-dm1eh ok, thank you. So would you say there's a huge difference between 373 to 410? Like acceleration wise. I do do some highway driving. The high rpms/gas mileage doesn't really concern me. I just don't want any drone nor do I want to be toped at 100mph. I want my top speed to be at least 130 to 145. I really don't know my top end speed on my town car. Do to its goved at 111mph. I do want to get a tune on it. But I want to get some longtube headers for my car. So, that way I can just have it tuned once and be done with it. None of this going back and forth of tunes. Lol. Right now I have a jmod done on it along a roush exale back exhaust with a X pipe. And changed to all the piping to 2 1/2 inches instead of just 2 inch. Plus I have a jmschip by pedalmax that really wakes up the throttle. Like a night and day difference.

[@JefeLTX]

I daily drive 4:10s pretty fine to be , I give gaps at the red lights when I feel like it😂

[@5leatereater854]

3.73s are alright too if you want more top end pull. But 4.10s will tear some ass up fo sho.

[@madmod]

@@5leatereater854 3.73 with 26 inch tires is basically identical driving to a 4.10 with 28 inch tires.

[@Robyne_u61]

@@5leatereater854 no 3.73s suck na

[@P71ScrewHead]

@@madmod think 3.73s would be too weak for my 17x12 widened steelies mostly stock P71?? it has 345s 28" tires..lol

[@madmod]

@@P71ScrewHead A 3.73 with a 28 inch tire is actually a really good combo for getting out of the hole and keeping cruising rpms down. Its not that the gear is weak, its the 4k lbs of Ford only getting pushed by some 250ish HP that makes it sluggish but 3.73s will have zero issue with that big of a tire which imo is pretty overkill on a stock vic

[@Foxsnstyle]

If that's stock it's 2.73 gears My 97' came through stock with 2.73 i upgraded to 4.30's did a full pi swap bored out 0.30 over with a 100 shot From Nitrous Outlet after the on3 turbo kit and she's a full on beast Considering she only came through with 210 horsepower now she's 824 fly wheel hp with full forged bottom end and a t-56 Over the stock t-45

[@midnight347]

The new edge im pretty sure had 3.27 stock. The sn cars also got 3.27s but it may not have been standard then. The cobras in 97 def had a 3.27 standard which is nowhere close to enough cobras na need 456 and 4.10 with a blower. Just my .02

[@jesterokjones4954]

Lmao, at least your honest, they really don't make power for shit.....They sound fucking amazing though. Now, the DOHC 32 Valve Cobra 4.6 is a different story, one of those with a mild cam, higher flow heads and a centrifugal supercharger and you can easily put 600 to the ground

[@jeffsloane8628]

Key here is track duty. 4.56 for the street is not a good combo. 4.10 is about as far as you want to go if you spend any time on an interstate. Thumbs up for the video.

[@DGGarage]

Thanks for watching! I did it because people told me it was dumb. It’s actually in my buddies drift car now and works amazing for third gear drifting. Honestly I didn’t find interstate drifting a problem. If I had to choose 4.10 would be the perfect gear.

[@reginaldadams8229]

True I wouldn't go 4,56 at all and I have 2,004 Terminator Cobra with Super Charged that makes a little over 900🐴's with 4,10 and it Bad [A] daily driver

[@skylersmall6322]

I have 4.10's on my 2007 GT and I'm putting 3.73's on my 2009 GT500 this Friday. Gear changes make a huge difference. I'm also putting some beefed up rear suspension to help hook up.

[@robertswift6101]

i had 4.10`s in my 2007GT and went down to 3.73 for better highway driving,,but now that i dont use the highway at all very much,i am thinking of 4.56`s or even maybe higher for the street

[@carsandhobbies]

What exhaust setup do you have that thing sounds amazing!

[@DGGarage]

Cars and Hobbies stock manifold with cats removed and flow master super 10s

[@jamiebaker5358]

Sounds like crap

[@tre_4]

@@jamiebaker5358 , how does your car sound ?

[@tomkjr1]

@@DGGarage Try some Borla stingers and you'll never look back with regret. Blowmasters are old news.

[@jamiebaker5358]

@@tre_4 better than that

[@donnie6178]

I had 3:31's in my 2011 3.7 manual Mustang. I than put 4:30 gears in her and that made a huge difference. I go on the highway 80 mph at 3000 rpm.

[@SlikLizrd]

The famous 95 MERC gives 80 mph at 1980 rpms -- 2.73 (stock) rear end gears, cast aluminum diff cover, 75-W-90 Royal Purple gear lube, LubeLocker Gasket. 24 mpgs on the highway.

[@hyperwolfco8021]

How did it do at the track?

[@mikeys7536]

Those Street Comps are okay if it’s about 90+ degrees out. I had a set on my Terminator and had to switch to ET Streets.

[@jameslesswalk]

Thanks for the video i have a f150 4.6 2v 4r70w with a procharger and ive been trying to decide if i wanted 410 or 456 gears im building the truck for 8th mile street but i still wanna be able to cruise it to the lake or something on the weekends the max speed limit around ehere i live is 55 so after watching your video im convinced 456s would be great and thats what i really wanted anyway lol so again thanks

[@madmod]

Your truck runs taller tires so 4.10 would be the longest gear i would run if swapping it. 4.30 or higher honestly

[@jimr5703]

Doing a little math; 70mph at 3000 means you'll be doing 135ish at 5800rpm - in overdrive (I'm assuming you were using the overdrive gear on the hightway). Take out the overdrive and you're topping out your RPMs in the 1/4 mile by the time you hit 120. Kinda limits the amount of improvement you can get on the 1/4 mile. 1/8 mile will be good, maybe even on a road course if you don't mind a lot of shifting.

[@P71ScrewHead]

adding more hp will help that.. ;)

[@jimr5703]

@@P71ScrewHead True; to a point. When you run out of RPMs at the top end you're no longer accelerating in the 1/4. Once you have enough power to hit rev limit before the quarter is over, it's time to get taller gears.

[@P71ScrewHead]

@@jimr5703 i can agree on that too, but depends how many times you're shifting in the 1/4 n how much power you got, gearing is key n every car is different.. i too think it's ok to gear up if your car has plenty of power.. One dude put 4.88 on his 2v Mustang n car was tapping out at 90mph..lol

[@hotrodlincoln7186]

​@@P71ScrewHead Wow 😆. But I bet it hooked up pritty darn fast and got to 90mph pritty quickly

[@P71ScrewHead]

@@hotrodlincoln7186 Always does, especially now after TFS top end.. Now I hit 100mph..lol 😆🤣🏁

[@w41duvernay]

Should think about swapping in a t56 trans in . I'm am assuming you have to drive in rural areas with that gear.

[@minister192]

Hey is this car a automatic or a straight gear? I have a friend who has 4.88 in his mustang 5 speed and his does not tach that high, just wondering?

[@DGGarage]

It’s a automatic

[@minister192]

@@DGGarage Thanks, I have 3.73 in my 01 , and some 4.10s that I have been sitting on for about two years to go in but after seeing this video I might just go ahead and get some 4.56

[@DGGarage]

@@minister192 the 4.56 is fun if you like burnouts and donuts lol. If I had to do it again I would got 4.10

[@markhughes2359]

@DGGarage what size tire would you recommend for street and drag strip with the auto and that gear?

[@jayg1358]

How are you still enjoying the gears any issues

[@wickedvq491]

Would like to see one build to carve corners instead of drag racing

[@briancolyar685]

I had 4.56 in my 99 gt. Could start out in 2nd easy. Daily drive sucked. An my problem was kept stripping out axles spinning so much. But they would get up an go.

[@eddiespagetti8395]

I had ,456 in a ford fairlane 289. Great off the line city crawler. Good luck on interstate. Top speed was not fast but off line not many could beat be off red light.

[@hotrodlincoln7186]

What was the top speed

[@eddiespagetti8395]

@@hotrodlincoln7186 about 100 mph rev to 8500 np. Not geared for top speed. Just 1/8 mile great 0-100 real quick.

[@hotrodlincoln7186]

@eddiespagetti8395 I think I'll just upgrade to 3.73 gears. I have 3.27 gears with a 4-speed automatic.

[@eddiespagetti8395]

@@hotrodlincoln7186 wise for daily driver and bit of hiway driving. 373 great for that. 456 just to low but wild with 4500 hi stall. . Top end the 373 are best

[@jerzeymade9098]

Is your gt stock? Any motor work?

[@DGGarage]

Jerzey Made its bone stock with a 100 shot.

[@donnie6178]

Only problem is i cant get the tires to hook up, and i have 10 inch tires, but she just sits there going about 20 miles and hour thru 1st 2nd and finally she starts to move when i put her in 3rd gear. 😣😣😣

[@DGGarage]

Sounds fun! Them v6 cars are awesome

[@DadifiedX4]

Just went to 3.73 and now I kind of wish I went to 4:10. But I ain’t doing it again!

[@P71ScrewHead]

lol.. Why, too expensive?? i do want to know why you wish going more aggressive on the gear tho.. i have a 09 P71 with 17x12 widened steelies, wanted 3.73s for mpg reasons but been rethinking it lately..

[@DadifiedX4]

@@P71ScrewHead just more fun to bang around with 4.10. But 3.73 is pretty nice as far as speed and mpg. No money doesn’t bother me. I install my own parts so $150-$200 not a big deal. Just don’t feel like doing a rear end again lol

[@P71ScrewHead]

@@DadifiedX4 oh ok, that's very understandable, it is a bit labor intensive n all the breaking in process does take a bit f time so i get it..lol i think i'll be happy with 3.73s, this isn't my "race car" build so i think i'll be fine, altho i am putting heavy ass widened steelies on it..lol

[@davidferguson3402]

4.56 ? Way, way, way too low. Only good for quarter miles. And in-town drag races. But the car has got no "legs." 3.73 is the lowest I'd ever go.

[@chads3308]

Quarter mile is to long, 456 are light to light. I had em my 76 Z28..

[@radfish4161]

It really depends on where your engine is making power. 4: 56 is a little high for a stock 2 valve 4.6, with a 5 speed, in my opinion. Sure, it feels like a new car, because it puts you in the power band quicker, but when there's no added power in the power band...Yeah...

[@mmmmmMuffinz]

4.56 are for 1/8 mile drag.

[@deleted....2000]

Whats the mpgs and rpm are you in on the highway

[@zacharypropps3861]

Had 3.73 and wish I would've gone 3.55 for highway use . 4.56 is nothing but track

[@P71ScrewHead]

reasoning??

[@P71ScrewHead]

i got 345s on 17x12 widened steelies on my 09 P71's stock 3.27..lol i'm building a widebody Cop Vic.. My plan is 3.73s to have some decent mpgs since i don't want to go crazy on the build yet.. Go look at it if you'd like on my channel, got a few vids on it, nothing award winning tho.. Might have to reconsider to some more aggressive gears since i'm putting some heavy wheels on my car, i'll decide later..

[@DGGarage]

That’s awesome! I would at least got 4.10 with that build!

[@P71ScrewHead]

@@DGGarage thanks bro, quick reply, i appreciate that, i have 4.10s sitting in my closet i plan to use for my 95 Lincoln Town Car i'm fully building into a stroker 5.0L 2v bored 0.030 over.. Think $4,500 is fair or too much for a stroker 800hp rated forged build?? TrickFlow Race 195 heads i bought for it too n bought MHS TF Stage 3 cams, what do you think of that setup?? i told them i wanted 9:5 to 9:8 compression to boost later, might be using 93 octane or e85..

[@krownvikkhris3004]

Hell I need to put 4.56 gears in my Crown Vic now that I see how they perform with the automatic

[@JohnTraeKing]

4.6 engines LOVE 4.56 gears!

[@bigdealdave1798]

Great video!

[@DGGarage]

Thank you!

[@dereknadeau5226]

245 or not wide tires at all , so hopefully you mean the ridiculously small

[@ticojason8868]

I did 4.30s in my truck and wish I would have did 4.56s..... Now I have a set of 4.56s I'm going to put in my 98 Mark Viii and everyone is against it but I want to do it anyways... I see this car is auto and I think it has the same transmission as my Mark Viii so I would expect to see similar results

[@davidleland8729]

A 3.73 would have been adequate for the street and highway driving. Anything more and you will be replacing your transmission soon. I seen that happen alot!

[@DGGarage]

I understand that. But this is just a around town/track car. It’s super fun to drive now. Even if I wanted to take it on the highway I wouldn’t be scared too. I love it.

[@davidleland8729]

@@DGGarage Yeah... my friends said the same. They learned the hard way. I have a 95 Thunderbird with a 99 P.I. motor from shelby motorworks with short tube ceramic coated headers, diablo sport tune chip, flowmaster dual exhaust and 3.73 posi IRS rear diff. It did a consistent 11.67 in the 1/4 @ 118 mph. It has 367 hp.

[@midnight347]

@@davidleland8729 trapping 118 with 367 rwhp in a heavier than a mustang tbird? Sounds fishy.

[@LA_Commander]

No, actually when you put deeper gears in the diff, it actually takes pressure off the transmission, since your rear axle is now doing more of the work. Now if you abuse the car and beat the hell out of it at every stoplight, then yes that can wear out a transmission.

[@P71ScrewHead]

@@midnight347 yeah, that's what i thought, must have full weight reduction to be that fast in the 1/4, or a crazy good tune..lol

[@fededabz52]

4.56 be good for my 2000 v6 i use for drifting? 2nd gear is so long right now. Never been to the end of it.

[@DGGarage]

Go with a 4.10

[@Mason-m1u]

And remember kids, bigger gears are only worth it if your can can hook

[@poodlesauce7560]

People do not understand gearing at all.....I ran 430s in a new edge forever....drove great on the highway.......

[@midnight347]

No shit and they automatically think you go from getting 27 mpg highway to 10 mpg highway which is not true at all. My old 97 cobra would get 24-25 on the highway with 4.10 gears and the ac blasting and that is including a few wot on ramp blasts on my 160 mile trip that I calculated it on. I was afraid 4.10 was too much because of how everyone talks about gearing and after I kicked myself for not going 456 ecspecially on a b headed 4 valve which is gutless downlow revs to 7k stock. My bolt on 07 gt500 has 4.10 gears and I still knock down 21-22 on the highway at 70 and they're only rated at 20 highway from the factory with 331s.

[@Robyne_u61]

@@midnight347 yeah I don’t understand why people are so afraid of gearing i went 4.10s and would have gone 4:30s. Anything below 4.10s suck for NA

[@joracer1]

If the object was just to see how far you can spin, why not just put crappy tires on it?

[@jacobcarrillo933]

I put 573s in mine. Top speed is 92 miles an hr.

[@P71ScrewHead]

too funny..lol

[@lionsgarage]

sweet ride

[@ThatFireFighterCanFixIt]

What mufflers do you have

[@HammerHeadGarage]

Might try a 4.30 in my 84 ranger 331 t5 daily.

[@DadifiedX4]

Also I have the same issue with my battery light coming on even tho the battery is fine and alternator is charging it. Any idea?

[@DGGarage]

More than likely the diode in the alternator. Basic needs a alternator

[@stephenantonio3713]

3 grand at 70, holy crap. And with straight pipes, that's terrible. I put 3.90's in my 02 GT. Honestly, i think they are perfect for the street..

[@trackpackgt877]

Dude 456 gears so awesome!!! I'd like to put 4:33 in my 2010 GT it's already got 373 witch are pretty good but a 433 it would RIP!!

[@richspeel7576]

I got away from the 411 and 410s just too much low in torque was getting destroyed by automatics

[@Celticman197]

It's great until you get out on the Interstate trying to keep up with Kias and Toyotas passing you at 90 mph. Then you wish you had your 3.27 back.

[@jamiebaker5358]

3.73 is what you need

[@clayclifton2255]

You ain’t go past the gate station with that kind of gear all those cars will be for his dragracing

[@midnight347]

Dude gears don't kill mpg like everyone acts like it does. It will drop 2-3 mpg or so on the highway but anything up to 50 mph the mpg may actually improve if anything. Allows the car to pull along easier without lugging the engine which uses more fuel than revving the car up does. My 07 gt500 supposed to get 20 mpg stock with 331 gears my bolt on gt500 has 4.10s and I still knock down 21-22 on the highway which is better than the factory rating and its pushing 550 rwhp. Now I do have free flowing exhaust intake and tune which all helps mpg but still.

[@ryan422423]

How much does it cost to get 410s installed in my 96 cobra?

[@P71ScrewHead]

About $1k, $1.3k most likely if they provide it all..

[@titosvip0125]

I'm just getting into gears . I drive a 2010 jaguar xfr 5.0 Supercharged.....what gear ratio would u recommend??? I'm making about 461 torque..... thanks

[@P71ScrewHead]

3.73s or 4.10s are good.. Try it all, if you don't mind..

[@likelywill]

I lost my fucking impact 🤣 I need my shit poppin like that I got 04 GT u must have your back cats out?

[@DGGarage]

I got all the cats gone and flowmaster super 10s

[@UnderDog2V]

Do you daily it with those gears?

[@DGGarage]

My buddy does. It’s not bad at all.

[@dallasthomas64]

Auto or manual car??

[@DGGarage]

Auto

[@stevenyerry2209]

did you let it break in

[@DGGarage]

I drove it ten mins and then I did a big burnout. It’s solid

[@stevenyerry2209]

@@DGGarage thats sad and you gave it to your friend after. diffs need to be broken in for 100-500 miles not ten minutes

[@DGGarage]

@@stevenyerry2209 it’s not sad! We absolutely beat the hell out of this car. It’s been a great car.

[@cross8936]

You got a brand new set of tires just to burn them off lol. You said they would hook but you’re spinning all over the place man

[@DGGarage]

I didn’t swap them on till after the burnout lol

[@DGGarage]

I didn’t swap them on till after the burnout lol

[@cross8936]

DG’S Garage oh ok lol

[@charlesheinle9908]

Hmmmm. The red Vue looks like an 02 or an 03.

[@s5loh974]

What mods on that put me on i need dem 315s😍I got a 2000 gt in the works

[@DGGarage]

They just fit! I put them on a 10.5 wide wheel and there’s still good room

[@paulciprus9582]

Also...wanted to add that @ 70 mph in 6th the rpm is 2250...so 4:10s in a Cobra is possible

[@SlikLizrd]

With the stock 2.73 gears, 80 mph = 2000 RPMs Perfect for high-speed cruising -- and stingy at the gas pump. If you're going racing, a Panther ain't your best choice. A stock 2-liter BMW will beat your 60-foot times -- easily.

[@paulciprus9582]

@@SlikLizrd I ain’t racing anybody....my Tuned R56 turbo Mini will blow your 2.0 BMW off the road at 20 psi boost and 240 hp 2650 lbs....bring it...BMW hate my Mini....I just dust them....🤣🤣😄😄

[@SlikLizrd]

@@paulciprus9582 You should read more carefully. I do not drive or own a BMW. Never said I did.

[@maxkeeble5122]

Why isn’t 4.10 a good daily driver ?

[@luismastercool]

How much for the piece gear

[@crappiehookking387]

It sounds really healthy and looks good.

[@theophilusone7]

Dope AF

[@doeverythingnotomorrow5625]

Hey can U help me out with this question... I wanna put a 3.55 gear on my stock 1998 gt 4.6L mustang... Can I put in the 3.55 gear on stock or do I have to upgrade any other parts so it can take the abuse like burnouts?

[@DGGarage]

You don’t need any thing else. Just put them in and have fun. I would at least go 3.73.

[@doeverythingnotomorrow5625]

@@DGGarage thank you my friend it helps a lot

[@MatthewLit]

That’s not really a daily gear I don’t think I went with 3.73 on my 08 and I thinks it the best for daily and performance

[@na-gt3720]

Any times in the quarter

[@mikeh.753]

I have a 91 Toyota 2wd p/u with a 5.3L 4l65 trans and went from a 4:10 to a 4:56 and it ran a slower 1/4 mile so sometimes you can actually go to too low of a gear. And I run a EZ Locker and I have never had any problems with my locker.

[@MrDerekRobinson]

That ran slower time because it didn't need a gear change any taller than what was in it. A 3.73 would've been your best bet with that engine/trans combo. Something like a 4.56 would be great for a car that originally comes as a 4 speed transmission with a factory 2.73, and terribly under powered like 250 to 350hp. Any more than that and you'll need grip tires to keep from spinning on full throttle

[@luismanuel5423]

Planning on getting 4.10s for my 03 gt, 4.56 though? I mean my car is not a daily so mind as well right? Anyone know by how much hp or torque increases with these gears and 4.10s? Thanks

[@DakotaWatkins117]

Gears will not change how much power a car has rather it changes how it puts down that power.

[@trumpsextratesticle8590]

~20% more torque multiplied at the wheels with 4.56's over 3.73's.

[@midnight347]

@@DakotaWatkins117 steeper gearing multiplies torque that is what he means. It won't add power on a dyno may possibly even lose a little compared to stock gears but it feels like adding 50 hp or more. Its a huge difference.

[@ogon1485]

I had a 5 Speed, 4.6 SOHC I daily my car on 4:10.

[@blakecastleberg671]

2:23. Story of my life

[@dereknadeau5226]

That’s the one you’re building?? I’m what about the one you’re given to your best friend?? Your first one looks like you never even finished or even started the first one!

[@falcon6995]

Spinning isn't winning!

[@williamfabiano543]

Had a brand new 86 GT auto 327 gears and it was a dog.

[@slicksloth_416]

So break in is not necessary

[@Dmkpit401]

worst drive train ever for mustang, new edge in sharp looking but they are dogs, im coyote swapping mine with gen 3 $10,565 for motor,trans and ecu control pack make 480hp thats 40k less then i spent building turbo fox, and i can grocery get it

[@trillrifaxegrindor4411]

let us know when its done

[@JayRSwan]

Too much tire without the HP behind them you end up taking a speed penalty. Slower ETs

[@SlikLizrd]

There is no 3.27-to1 gearsets. They are 3.23-to-1 gears. 4.56 gears in a street-driven vehicle is downright stupid, but OK for a trailer queen.

[@DGGarage]

Well it drives around just fine. Been driving it for 4 months now with out a issue.

[@falcon6995]

There are 3.27 to 1 gear sets they are for Ford. 3.23 to 1 is a Chevy gear ratio. My 2001 GT has a 3.27 gear set.

[@DGGarage]

@@falcon6995 lol some people don’t get it! 3.27 is a very common gear for a new edge from the factory. Your right about that

[@SlikLizrd]

@@falcon6995 You are correct -- and I was mistaken. I have a question: What number of teeth on the pinion gear and on the ring gear will yield a 3.27 ratio -- and what number of teeth on the ring and pinion gears yield the 3.23 ratio ?? Example: A 41-tooth Ring gear and a 10-tooth Pinion gear yield a 4.10-to-1 ratio. A 37-tooth Ring gear and a 9-tooth Pinion gear yield a 4.11 -to-1 ratio. I wanna know the difference in the number of gear teeth between the 3.23 & the 3.27.

[@madmod]

4.56 gearing with a 28 inch tall tire drives identical to a 4.10 car on 26 inch tires which is just about the most common combo for these cars. 4.56 gearing will trap 110mph under 6k rpms which is enough mph for a mid 12 seccond rip and could easily still have a 120mph top speed with close to stock shift points. A 3.27 car would be doing 150+ mph at the same rpm which is downright stupid for a Mustang, let alone a 230whp car.

[@dssd245]

You gotta automatic? Are you special?

[@aaronkelley9960]

You don't know what your doin. Sounds horrific. I hope your ""friend" has another "friend".