Design and machining wrap features on 4th axis CNC steps

4thaxis crankshaft machining video • Siemens NXCAM Cranksha...
CAD/CAM,NXCAM,CNC,SIEMENS NX,TOOLPATH,WRAP ON CYLINDER

[@yasin7271]

thank you

[@qrimlu_nogai]

The author of this video, RESPECT YOU! I would like to see the 4th axis on a turning-milling machine, from the position of a moving part-workpiece, in your case, the cutter moves around, how to do the opposite?

[@extremeperformance4110]

Hi, Thanks for your comments, I have uploaded a new video for 4th axis milling

[@qrimlu_nogai]

@@extremeperformance4110 Thanks for the video for your efforts! But I wanted to see something else that if the cutter tool was in one position, and the workpiece itself was movable around the lathe chuck (clamp). Probably my English is not so good, and you do not understand!

[@hamedhamedi2118]

Hi sir, please remember me roughing 4axis In nxcam. Thank you.

[@extremeperformance4110]

Hi Hamed, you need a demo on roughing toolpath for 4th axis?

[@hamedhamedi2118]

@@extremeperformance4110 Hi, yes sir .Thank you for your kindness.

[@hamedhamedi2118]

@@extremeperformance4110 Hi, yes sir. Thank you for your kindness.

[@extremeperformance4110]

@@hamedhamedi2118 , Hi, Hamed , no problem,a demo for 4th axis rough is uploaded.

[@hamedhamedi2118]

@@extremeperformance4110 Hi, can you please send me a clip. Thank you sir.

[@hamedhamedi2118]

Hi sir, please remember me four axis roughness in nxcam. I want the amount of load in each step To be .5mm. Thank you for your kindness.

[@extremeperformance4110]

Hi Hamed, use cutting parameters option to specify multiple cuts and give each cut incremental value after specifying stock. Axial depth of .5mm can be specified in cutting parameters.

[@Бунтарь-и2з]

Чуть помедленее чувак мышью води

[@hamedhamedi2118]

Hi sir

[@lindosgeorge]

i am sure that you can do it faster thank you

[@extremeperformance4110]

Thanks.