2000V Vertical Rod Panic Installation

[@glorymilar9360]

great job !!! i can watch this a couple more times and get a feel for it thank you for posting

[@Japone81]

This mans attitude says I’ve done this so many times before let me slow it down for these people 😂

[@danielbrazeau4777]

Why use the through bolts for the trim instead of the self tappers?

[@mikefournier8263]

NEVER USE A LEVEL TO " LEVEL" A PANIC BAR ...HOW DO YOU KNOW FOR SURE YOUR DOOR IS LEVEL IN THE FRAME OR IS THE WALL ITSELF LEVEL ?? ALWAYS USE A TAPE MEASURE TO MEASURE FROM THE LOCK EDGE SIDE OF THE BAR FIRST .SET END OF TAPE ON FLAT PART OF BAR ON THE HEAD END AND MEASURE UP TO TOP OF DOOR ITSELF ....EXAMPLE ..40" ...NOW HOOK TAPE ON TOP OF DOOR ON OTHER SIDE(TAIL END.) AND MEASURE DOWN 40" AND MAKE A MARK . NOW ALIGN THE TOP EDGE OF PANIC BAR RAIL ON THAT MARK ,AND MARK END PIECE BRACKET HOLE TO SECURE D3VICE RAIL ...THIS IS IMPORTANT WHEN INSTALLING MULTIPLE DEVICES IN A ROW WITH LITE KITS IN THEM ,AS ,LIKE I SAID LEVELING THE BAR IS NOT ACCURATE ...MANY TIMES THE FRAMES ARE LEANING IN OR OUT AND NOT TRUE ...AND THE WALLS MAY NOT BE TRUE ,AND IF YOU LEVEL THE BAR ..IT MAY LOOK SKEWED TO THE DOOR ,IF YOU MEASURE FROM TOP ONLY ,DOWN TO THE BAR ...ALL BARS WILL LINE UP PERFECTLY . DO NOT MEASURE UP FROM BOTTOM OF DOORS AS THE DOORS MAY HAVE BEEN CUT TO CLEAR UN-LEVEL FLOORS. ... OR ,DO NOT MEASURE UP FROM UN-LEVEL FLOORS EITHER ,TO KEEP BARS PERFECTLY SQUARE WITH DOORS ,ALWAYS MEASURE DOWN FROM TOP ...THANKS .. I AM A 35 YEAR DOOR HARDWARE INSTALLER IN COMMERCIAL DOOR WORK . AND THIS IS THE ONLY METHOD I TEACH ,AND PLUS ,HOW DO YOU KNOW YOUR LITTLE LEVEL IS TRUE ??? DID YOU CALIBRATE IT ?? PROBABLY NOT ? THIS IS THE ONLY FLAW IN YOUR VIDEO ,AS THE REST IS GOOD ,IF YOUN WANT A "LIKE" FROM A "VETERAN" ,CHANGE THE TEACHING TO "MEASURE FROM TOP OF DOOR" ,JUST SAVE THE LEVELS FOR SETTING FRAMES !!!! THANKS GUYS.

[@renenava5213]

Ok

[@kakarotogoku8794]

Con razón ellos no se rompen la cabeza todo lo quieren peladito 😏😏😏

[@erroldaley8988]

Yes

[@kevinkoepke8311]

What about Kawasaki?

[@jgilmore6187]

Do not listen to anything this guy says