Designing a NBIOT/LTE CAT-M1 GPS tracker for Google Cloud IOT Platform

[@RajuPatel-nk8bc]

Hi Ravi, We can use SIM7000G module in Ahmedabad on 2G/GPRS network right now for send/receive data on cloud or to take GPS data or Navigation.

[@RaviPujar]

Yes, it works on 2G

[@iocareteam8529]

Using Quectel modules with an inbuilt CPU can be the better option as compare to SIMXX, You don't need any external CPU.

[@akshayghorpade5798]

Hi ravi i watch your most of the video also read blogs...i have queries regarding the battery charging ...why you use mp2617 why not tp4056?

[@axramar1992]

Which are the other best Dcdc convertors(adj to 4v,5v or 3.3v) available in small package ?

[@vpsinghknp]

Good

[@xuanthanhtraninh642]

Hi sir, my question is how can you connect to the network, for specifically, how can you check that you have set all up your IP, DNS, gateway,... and do you have to contact to your operator to have your module connect to their network? Im from Vietnam, operator is Viettel. Plz help. Thank you.

[@yotte8846]

you are a great man

[@RaviPujar]

Thank you for the kind words. Don't forget to like share and subscribe :)

[@babbalgts]

what is the Power consumption of this board ? is there a sleep mode/ energy saving mode? will it be connected to the NB-iot network wile in sleep mode?

[@RaviPujar]

It has deep sleep in modes. You can check STM32 stop modes. It's usually around 200uA. Everything is switched off.

[@projects4996]

Great as always 👍👍

[@RaviPujar]

Thank you 😊

[@xuanthanhtraninh642]

Hi there, I have trouble about. connect to the internet through NB-IoT network. Basically, it go along with LTE bandwidth, so how can I use TCP/IP to connect to the internet? Could you help me. Thank you so much.

[@MyGui1000]

Hey Ravi, can I sse the code you used in this project, I'm working with 7000G with MQTT to send menssages to Google Cloud but there's no example

[@khairilumam9524]

i've got a lot of problem with sim7000. it's very unstable for FTP connection comparing with more reliable sim800. and also I found it easily hang and no respond. do you know how to deal with this problem?

[@mukund22kar]

Hello, i have some question why are you using an external GSP module 7000e has built-in GPS will the 7000e support JIO sim Thank you,

[@RaviPujar]

The board supports active antenna externally and also internal antenna GPS module. As requested by customer. It will support JIO NBIOT network only when launched

[@sam9250122356]

Hello Ravi, I am working on a project and need some suggestions. Can you help me?

[@mukund22kar]

Which IDE do you use to program the stm32?

[@RaviPujar]

Keil IDE

[@mr-hs5dg]

How to get an nb-iot sim in India.many customer service don't know about what I'm saying.they are not giving idea about how to buy this sim .can you please say me how you purchase this nb-iot sim

[@RaviPujar]

Which module you are using? Ask the manufacturers support team, they will connect.

[@khageshroy7766]

Sir, can you try the same project with ai thinker's... A9G?

[@RaviPujar]

We haven't worked with All winner modules. We select modules based on client requirements.

[@JoelMPanchevre]

I really want to track my outdoor cat. Does this work and would you sell me one?

[@RaviPujar]

Hi, Please mail to [e-mail]. You want a 2g device or a NBIOT? 2G devices are smaller.

[@feng998]

That's ridiculous, the SIM800C anda SIM700 E is a 2G chip

[@sumanjha1951]

Hi Ravi, i had sent you mail. I am looking for one help. Can you help me to find best MCU with ethernet phy and wifi built in like esp32. But with esp32 my experience is not good. So i am asking.

[@RaviPujar]

Sure, please post your technical query with details on www.embeddedadvice.com. We can discuss

[@sumanjha1951]

@@RaviPujar Thanks, i will do

[@sumanjha1951]

I had sent you mail and even posted my request on embeddedadvice also. But no response tell yet. Kindly check

[@rvenkatesan9518]

Indoor location tracking system can available

[@RaviPujar]

There are many solutions possible. Please mail your requirements to [e-mail]