I did this too! word of warning to anyone doing this in the future; put your boost gauge further from you. This is because of the length of the boost cable being kind of short, and if you put the gauge closer to you, you won't make it into the engine bay. AFR is fine.
@PoliteParker3 жыл бұрын
best vid on YT for the rallis!!
@TheSnyds3 жыл бұрын
Thanks!
@MrShortStuff5 ай бұрын
So.just installed AEM boost guage on driver side and it stays on even when the car is off? I tapped cigarette socket, fuse box for stereo and tried accessories but for some reason, it stays illuminated even when car is locked. Never have I seen this with anything in my life and it's my first AEM guage. Any ideas?
@JxedonVlogs Жыл бұрын
Hey man what app were you using for that elm adapter I can’t find one that connects to mine on ios
@commonisekaihero47452 жыл бұрын
Hey man sorry if you’ve shared this in another video but what did you end up doing with that t bit. I’ll be doing this install soon and the more stuff I need before the better!
@favier9856 Жыл бұрын
I teed mine to bov line as well but my gauge reads negative 30psi and when i rev it it still doesnt move from negative 30
@theayatollahofrockandrollah Жыл бұрын
so how is that afr gauge and sensor working out for you in the long run quality wise?
@jonathonhinkle892 жыл бұрын
My boost gauge randomly started reading max boost at 7psi but the car is def hitting full boost by the feel. Any idea why?
@korkser Жыл бұрын
What does that 3rd fuse you used for? And does it matter what amp?
@roberttuckerjr471811 ай бұрын
What radio head unit are you running?
@ayeyoitsrocco9395 Жыл бұрын
Yo, so I in my Ralliart, im running atock with an evo x bov, my gauge is reading -20 on startup, is this normal?
@commonisekaihero4745 Жыл бұрын
Don't know if you found you answer but yes, that's normal
@xjqzy89623 жыл бұрын
what exhaust kit are you running
@TheSnyds3 жыл бұрын
Ultimate Racing Catback. Resonated midpipe
@xjqzy89623 жыл бұрын
@@TheSnyds do you recommend cobb accessport or no?
@TheSnyds3 жыл бұрын
From everything I've heard I would say no. Not for our cars at least.
@ShiftEnvy3 жыл бұрын
How did you set the torque pro app to read the boost properly? Mine seems to be all over the place.
@TheSnyds3 жыл бұрын
Def check all your lines man. It should be accurate
@ShiftEnvy3 жыл бұрын
@@TheSnyds I'm talking about the OBDII version. Any idea how to make that accurate?
@ibrahimkhattab1695 Жыл бұрын
Hey bro which blow off valve u have
@SteveChambersXP3 жыл бұрын
How did you get the top to not pull the oem a pillar down from the weight? I got mad sag (piece is tight against oem)
@TheSnyds3 жыл бұрын
I didn't have to go anything for the oem side. Guess I got lucky?
@johnryan89852 жыл бұрын
I am actually having a hell of a time with my oem pillar not snapping in. Was hoping to see him have the same problem
@SteveChambersXP2 жыл бұрын
@@johnryan8985 I ended up having to cut holes in the OEM one and 3m taping them together. It won't sit flush unless wires come from under a pillar
@three2sedan3 жыл бұрын
Hey bro so im doing this on my evo 8, i have 3 aem gauges though, can i connect all 3 power and ground to one fuse tap?
@TheSnyds3 жыл бұрын
You should be able to. If it don't work you may need a bigger fuse
@Jay_bo222 жыл бұрын
Bro so I did the same exact steps.. and my cigarette lighter plug 12v stopped working.. fuse is not blown as well and the connection behind the plug isn’t loose.. please help
@TheSnyds2 жыл бұрын
Funny that you just commented. I actually fixed that issue last night! Add another 15 fuse to that tap in port. Fixed mine, just use one of the extra fuses provided from under ther hood fuse box
@mad.22203 жыл бұрын
What diffuser you using man?
@TheSnyds3 жыл бұрын
Stock Ralliart diffuser
@pollito33092 ай бұрын
tip for anyone doing this do not use zip ties for the boost gauge mine popped off not it
@Erkkremlinklum3 жыл бұрын
Do any of these steps Have to do with having the digital gauges ?
@TheSnyds3 жыл бұрын
These are digital
@Erkkremlinklum3 жыл бұрын
@@TheSnyds this is true haha I meant on the infotainment center
@TheSnyds3 жыл бұрын
@@Erkkremlinklum oh nope. Two separate things man. Infotainment is Bluetooth to an obd2 reader
@Erkkremlinklum3 жыл бұрын
Okay cool, awesome video btw. Making it 10x easier for someone that’s never done it before👍🏻
@Erkkremlinklum3 жыл бұрын
@@TheSnyds do you have the grimspeed boost controller by any chance? I’m trying to figure out if I’m supposed to hook up my bov to it. Thanks in advance
@M3rcy002 жыл бұрын
Do I needa aftermarket bov to Install boost Guage??
@TheSnyds2 жыл бұрын
No you don't
@silentkreeper953 жыл бұрын
Will you do a oil pressure gauge?
@TheSnyds3 жыл бұрын
Yesir eventually lol
@Erkkremlinklum3 жыл бұрын
I got 18 gauge wire to extend oil pressure wire and it’s definitely larger wire and instructions say it’s 22-26 awg wire
@frommyyard3 жыл бұрын
Man I love that t-shirt. Do you know where there are more ?
@TheSnyds3 жыл бұрын
Same man. I need a larger size now lol
@frommyyard3 жыл бұрын
@@TheSnyds don't know where to get one?
@TheSnyds3 жыл бұрын
Na man. I got this for free at the Mod18 event
@Take_yo_rackz2 жыл бұрын
Couldn't you have gone thru the firewall 🤷🏽♂️?
@kr3am8183 жыл бұрын
Vaccum should be at 10 on idle
@TheSnyds3 жыл бұрын
I've seen ppl say it fluctuates between 19-24 so idk lol. You got an answer for me!?
@j_tootie2 жыл бұрын
Vacuum should be around 20hg at idle, 10psia. it seems the ralliart likes to idle around 17-19hg (at least mine does) which to me seems low, but it's most likely the tune profile for the cams that is making the vacuum lower than the average vehicle.