Detailed look at Kone NMX14 Ecodisc

If you would like to support my work....
/ benolifts
www.gofundme.c...
Please note: Please don't attempt to copy what you see in this video without understanding of how to do it safely. I don't mean to sound bossy or tell people what to do. I just don't want people to get hurt. Just from watching my videos will not give you all the knowledge required to safely enter lift shafts.
My best videos...
• Beno guides and inform...
URBEX videos...
• URBEX - Live sites aka...
Fun lift videos...
• Funny lift videos
Technical lift videos...
• Detailed look at lifts
Adventures around the world...
• Best of my adventures ...
Building sites and cranes...
• Driving tower cranes a...

[@hariranormal5584]

that low speed hum sounds quite beautiful on this motor

[@stevendamavandi3482]

Kone’s NMX14 Eco Disc is the giga chad of elevators.

[@TheDragonFire123]

Random thought, but I wonder if any lift logic uses terminal commands, rather than buttons and an LCD, to give commands (i.e. having to enter in commands into a UART/serial terminal port). IMO, KCE has very little user facing difference to LCE. It was likely made to integrate all the functions of the DX class. Whether that's a good thing is a matter of perspective.

[@benolifts]

Yes. The Schindler Miconic V. The early versions had a serial to video out adaptor in the logic which you plug a screen into, then you plug a keyboard into a port on the logic, and you work with the logic through sending commands over serial. The later versions changed this to simply having a serial port, and you use a laptop to send and receive the serial data. This is the only example of a logic with direct terminal serial data. The majority of non relay lift logics have a serial port, but this uses custom data, and a program (often a win16 program) is used to interface with the logic. Also, there is some crappy German logic where to do anything with the logic you have to enter a coded command on a keypad. It is very user unfriendly.

[@UncommonElevators]

I love NMX14. It is the best sounding ecodisc model. Here in the USA tons of them have been installed in the last few years. That is good because before this motor was introduced Kone often installed really terrible lifts with no chassis and a 4:1 roped MX10, probably because the MX20 was very heavy and hard to install. Also, I am always surprised at how behind the rest of the world is when it comes to bypassing safety. Here, most lifts built since the 90s have a bypass key switch inside the car and up/down key switches on the top and bottom floors. These exist even on non-MRL lifts.

[@TheeSurfer]

Yay also I'm loving it in Egypt I've went down some lovely slides and went to some safety failure lifts with lovely motor sounds.

[@NaylenGamingTV]

I’m in Egypt too in the Aqua palms hotel.

[@TheeSurfer]

@@NaylenGamingTV omg come over here, also I got into the motor room of the lift in my hotel have you?

[@elevatorfilmersg]

The old 1960s Otis lifts at Arlington House margate would be replaced sometime this year to next year according to some sources. You might want to consider a revisit

[@genekeefer891]

I will say though It's a very nice look at a lift though you're well detailed in you're filming

[@PrestissimoMasterStation]

Warning!

[@contentdeleted142]

My favourite ecodisc is the mx20

[@Techwindowscomputer]

Oh is there new version of kone ecodisc now I didn't know that

[@superxraygirl1756]

The NMX 14 ecodisc is my favourite

[@Andrewjg_89]

But which one of those Kone Ecodisc models are more reliable or efficient. Some interesting stuff on how you explained that how they work.

[@LAUCHGeorge]

Can you please do a detailed look at Kone LCE? I don't understand anything of this Menus and it would be nice if you could explain it in a Video

[@jingarjay8754]

When is the detailed look at LCE coming?

[@benolifts]

Soon, hopefully

[@aziz75568]

10:27 "...and could crush them." Doesn't that sound much worse when it sounds casual?

[@EverydayEverything360]

Now I've had time to compare it I personally don't like the new black ring designs of KSS fixtures as the older designs.

[@KIRBZVIDS]

Good video that's well interesting mate how you can run the lift with the doors open like that what would be the main purpose for doing that? , Free fall lift stuck Passingers?

[@RossiZockt]

8:16 Thank's ive seen enough. :O :D

[@VerlorenMaster]

Beno, will you do a Cheap Flight Adventure to Cairo in Egypt? If you are in Egypt, you will have: *Egyptian Pound*

[@benolifts]

I might do. It is somewhere that I would like to visit.

[@VerlorenMaster]

Yes, and you will have *Egyptian Pound* if you're in Egypt.

[@BM13590]

Hmmmm the lift may be 2.5 m/s but not faster for 28 floors because you don't want to be inside the lift for like 3 or 5 minutes

[@benolifts]

Most of the buildings this size have MRLs nowadays, which limits the speed to 3 m/s.

[@alexbrace2005]

The CLONK is the best sounding brake

[@What_The_Fuck_Did_I_Just_Watch]

I love EcoDics!

[@lbsiuk]

Oh and don't forget the MX05

[@dinhtuan752]

He did

[@PrestissimoMasterStation]

Welcome, beno!

[@dinhtuan752]

your welcome

[@windowsxpnt2347]

hey austin this is guys

[@piotrekiwindy1980]

So much floors for mrl! It's interesing.

[@the_2_td_s]

Please make a detailed look video at an mx20

[@the_2_td_s]

Beno what is your favorite kss? My favorite is kone kss d40

[@FateBoost]

Just seen you on channel 4

[@nelsonahlvik6650]

What VF does it have (# in menu 6)?

[@benolifts]

Sadly the LCECPU was locked.

[@nelsonahlvik6650]

@@benolifts Ah ok. Don't you have that unlocking tool though? Or does it not work on this generation of LCE?

[@benolifts]

There are 3 versions of LCE. The early version with the pull out chip - The jailbreak device doesn't work on this as there is no serial port. It is easy to jailbreak with the writing tool for the chip. The second version is the standard version that shows 5 and 7 when locked. The device can unlock this. The 3rd version is on this lift, which shows just 5 when locked. I haven't tried jail breaking this version yet.

[@UKliftandescalatorfilmer]

Could you do a cheap flight adventure to Belfast again? You missed some Schindler M series that are original but the outside indicators have been replaced

[@benolifts]

To be honest, I wasn't that impressed with Ireland

[@UKliftandescalatorfilmer]

@@benolifts Will you go to Belfast tho?

[@benolifts]

@@UKliftandescalatorfilmer I have no plans of going there, but where I end up going to can be very random.

[@UKliftandescalatorfilmer]

@@benolifts those Schindler’s might get modded which I’m worried about

[@UKliftandescalatorfilmer]

@@benoliftsthey’re being replaced by TKE soon 😢

[@PrestissimoMasterStation]

Exposition!

[@Internationalcartoons4063]

First Very interesting video too.

[@xxalexaviation]

Diamond

[@williamhuang8309]

First? Ok. Arriva.

[@Andrewjg_89]

Yes very interesting video but no one cares if you’re first 🥱

[@jakubukasiak2425]

Stagecoach

[@xxalexaviation]

@@Andrewjg_89 itss a bus company

[@contentdeleted142]

I don’t like the design of this lift nmx14

[@wisteela]

I just had to scan that QR code.

[@lollol6812]

How do you bypass older models of the LCE board?

[@benolifts]

For bypassing the safety, pull out the connectors and put a bypass loop in their place. For bypassing proprietary restrictions, for the oldest type, take the chip out and use a chip writing tool to change the variable for trip counter back to zero. For other types you can buy the jailbreak tool from ebay.

[@hotmixer2010]

Come to Singapore, all LCE here are fully unlocked

[@TheDragonFire123]

Maybe a consumer rights thing. In Australia we have them all unlocked as well; I guess the ACCC came down hard on the practice.

[@FifaMaestroAdam]

Wtf I didn't know there were lift enthusiasts

[@crazyleyland5106]

Why would an engineer bypass safety?

[@benolifts]

To move a lift that is not operating. Unless the motor or VF has blown, or there is no power to the lift, or there is a severe mechanical failure, then the reason why the lift is not moving is because safety is not connecting somewhere. The engineer will have to locate the point where safety is not connecting, and this involves moving the lift.

[@SixSilverStones]

I wish these went faster

[@BM13590]

Hello

[@Shnlmukpglifts_liftenthu-255]

Looks like a pizza cuter😂

[@xxalexaviation]

Can you dangle on this?

[@benolifts]

Possibly. The shaft celling is quite high to reach the hook. The faster the lift, the more over run space it needs.

[@PrestissimoMasterStation]

Warning!

[@dinhtuan752]

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!HIUKBYJUBKUVGHVVVVTHVHVGHVGHVJUGHHYV!!!!!!!!!!!!!!!!!!!!!

[@PrestissimoMasterStation]

Probihition!

[@dinhtuan752]

!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@xxalexaviation]

28 floors for an mrl gosh

[@benolifts]

I have seen such taller than this.

[@xxalexaviation]

@@benolifts oh

[@ZHD1987E]

@@xxalexaviation I have seen Kone Monospaces do 100m+. In Singapore there is one warehouse and 3 of them are N Monospaces (or Monospace 500) that goes around 30 floors at 2.5 m/s

[@nelsonahlvik6650]

19th

[@geoffreyacquaah272]

First!

[@xxalexaviation]

Sorry no

[@Andrewjg_89]

Otis Lifts

[@ReubenAshwell]

Arriva

[@RWL2012]

Stagecoach

[@dinhtuan752]

Rapid Express