Detailed settings of E 10 scooter LCD

[@bolojow]

Concise and well explained. Thanks you have been able to solve problems I was not able to find in other videos.

[@ErnestAngo254]

Thanks for your support

[@Michoudu56]

Bonjour comment retirer l'erreur 10 svp

[@benandrews8875]

What is the blue light at the top left that comes up when you hold the mode button ?

[@shafimandlik2018]

Thanks a lot bro for your lovely explanation about p setting 👍

[@osamag1677]

Brother please i have proplem which is that a red alarm ..and can't move in the scooter 😢🖤

[@ErnestAngo254]

Are asking about this sign. (!)

[@snip3rtig3r]

So where the red triangle is bro there should be an error code where the battery level is and should start with an E-00 and start like that you can see the list of errors so if it comes up with that it needs maintenance

[@TorkVlog]

What I need to know is the s button not from inside screen it's a button not modes economy d & s

[@dilanrauf4363]

Hello! I bought a scooter with this LCD and i have driven it for 10km and it has an M sign on the screen but the scooter functions normally. i searched and it says motor failure but the scooter is fine! what should i do to remove it?

[@ErnestAngo254]

Thanks for your feedback otherwise if the scooter is working it's fine. Just make sure you engage a professional who will diagnos and find the cause

[@chefmotoph957]

Thank you for the vedio. I learned a lot. GOD BLESS.

[@TorkVlog]

Hey brother can u tell about buttons I got m button and s button on my escooter ..

[@glizzyglober2409]

How do you check total mileage you’ve done, or what does odo mean

[@sylentnoise932]

That's exactly what it is. Odometer means the total mileage of the scooter

[@mragar7807]

Hello sir is there 38v only e10 or should i increase it from the P with no damage

[@ErnestAngo254]

Thank you brother. E 10 scooter works very with 48v battery

[@azizsadaoui6325]

Please answer me I activate mode cruise but it don't work The icon of cruise is on in the display but not work when i quite the turtle !!!😢😢😢

[@arian8383]

Can you explain model number tf100?😊

[@ErnestAngo254]

Thanks a lot for your quest .. I will do it and keep you updated.

[@mohammedalshaer5976]

Hi i have somthing happend to me my scooter e 10 the charge meter is decrese when i am driving in high speed then when i stop or start to drive in liw speed the charge meter goes to full can you help me

[@anasbennadi6289]

Witch app can i connect to my scooter

[@ErnestAngo254]

Currently this model you can't connect with application. But you need to upgrade or buy another model which will be compatible with application.

[@pwr6706]

My man , i was really looking for this but I have a question in my scooter I have a bluetooth icon I have no idea hoe to enable it my scooter's model is the winner sky k5 explorer 3k watt, do you have any idea

[@ErnestAngo254]

Sorry for delay reply .. this is due to change of company.. otherwise Bluetooth on winnersky is mostly work with stereo or phone to play music or receive calls

[@Michoudu56]

Bonjour les amis en français comment retirer erreur 10 svp

[@barangkita1851]

do u guys know what cable is the speed limiter

[@williamiglesias5266]

Sir do you have charger for E20 PRO 1,500 watts 52 volts battery 16ah?

[@richy7346]

Bruh can u explain p settings of xthunder

[@johnibrahim9328]

Bro my kugoo m4 the voltage read 54.6 but on the screen show 54.0 i don't know this problem or normal

[@ErnestAngo254]

Thats normal because your scooter has some components that consume some amount of power

[@nathanjones6908]

Any reason why my p settings go back to factory settings,when I turn scooter off/on

[@ErnestAngo254]

Thanks for your support. The your LCD may be having problem of transmission. It's a sign of failed components within the LCD. I advise you replace it with a new one

[@ahmedashour4503]

Hello how i can find your shop location

[@rogelbyrondelapena3624]

Sir question, E10 lcd not turning on, lights are working, how to fix it sir?

[@ErnestAngo254]

Thanks for your support. If LCD is not turning on,, it maybe damaged just replace it with a new one.

[@Qvcpvc909]

Hello did you manage to fix it? If so, how did you do it? Im facing the same issue.

[@gilbertalowooja9276]

Pls I have an issue with my scooter. If I accelerate, it will move small then show a red exclamation sign and scooter will stop and I have full charge

[@ErnestAngo254]

Check connections

[@sabeeralipm8400]

Sir how can I start directly by switch without remote

[@ErnestAngo254]

Yes but it depends on your LCD

[@yaqubaxamee9146]

where exactly on satwa man?

[@ErnestAngo254]

0524138029

[@johnbryantolosa]

Are you from UAE bro?

[@ErnestAngo254]

Yes

[@Watchwithme_LRT]

I need location in satuwa

[@MohdM-i8v]

How did you get 99 !!!!

[@ErnestAngo254]

This is the max of digital count

[@Watchwithme_LRT]

Hi bro

[@ErnestAngo254]

Yes bro

[@BoongaReaction]

Can I get your number because I want to bring my scooter to you, it has LCD problem

[@ErnestAngo254]

0527861029

[@ErnestAngo254]

0527861029

[@haraanganjotsingh8032]

Backlight 😂

[@hesamsharif13890]

Hello brother, what is that blue light on the top left?

[@ErnestAngo254]

That is PASS it can not affect your scooter performance

[@azizsadaoui6325]

Explain please how do mode cruise in this scoteer

[@ErnestAngo254]

To Cruise... You need to go to Settings P16 and set time . It will turn automatic after holding throttle for the set timing

[@StevenBelcher-cr3gf]

After many hours watching utube vids I've finally gotten my beast flying at 100ks hectic 😅

[@ErnestAngo254]

Wow. . Thanks for your feedback

[@gilbertoperez1744]

Can you make video about JX 168 throtle model in E10 scooter

[@jiantv5730]

Thank you for the Info bro

[@PpPp-hv5om]

❤❤❤❤❤

[@ErnestAngo254]

Thanks for your feedback ❤❤

[@paulmutuotakaruga250]

💯💯

[@ag0076]

my scooter dashboard keeps blinking a red light and the speedmeter is staying zero even when i move whats the problem

[@nottinghamforest2980]

please the PAS is not working with this controller ? what is the reason , i used 3 different pas and not working , thank you

[@ErnestAngo254]

You need to get the guide from the old one and find exactly the same model

[@مصطفىانديري]

Good vido.... Tak uoy

[@ErnestAngo254]

Thanks

[@krisj5561]

How do I change from kph to mph?

[@fortniteeditsss7442]

Hi thank u for the info but pls does it have a backwards button to go backwards

[@ErnestAngo254]

Depending with the model of your scooter you may have 2 options or sometimes it may occur as multifunction due to different motor connection

[@mskgenmer]

Sir pag need nio ng spareparts, complete kami rito! :)

[@jonardaberjido1535]

how to turn off bluetooth?

[@ErnestAngo254]

Hallo Jonard, thanks for your support. In regard to your Bluetooth quest, would like to explain here that most of electric scooters have in build Bluetooth program on LCD only a few have separate Bluetooth chember. So to disconnect Bluetooth program require careful disassemble of the LCD and track Bluetooth power supply then separate the socket or disconnect the red wire only.

[@awperezsa8018]

Can you chose solid rubber tyres?

[@ErnestAngo254]

Thanks for your support ... regarding the solid tires you are supposed to choose the quality and the size you want.

[@samadwilles.w.a.g9820]

Whats code of lightning my light didn't working

[@ErnestAngo254]

Thank you for your support. Typically P1 on E10 is for head and tail lights. If they are not working you need to check the cable and connections . If they are fine but still not showing light.. then your head or tail lights are faulty

[@samadwilles.w.a.g9820]

@@ErnestAngo254 i really appreciate it 🙏 🙏 🙏 thnk u so much

[@dipsgaming7996]

Can you tell me start stop cruise control E10 scooter

[@ErnestAngo254]

Cruise mode is on P16 or P17 you need to set the timing which will depend on how long you press the throttle and start cruising. If you want to stop cruising you just press the throttle again one time.

[@dipsgaming7996]

@@ErnestAngo254 it has been 9 months ago, now u r replying. Anyway thanks for

[@ErnestAngo254]

@@dipsgaming7996 sorry bro for delay i have taken long to post new vedeos

[@ErnestAngo254]

I changed the company that's why I have taken long