Deuce and a Half maintenance

  Рет қаралды 2,605

Elliott Ray

Elliott Ray

Күн бұрын

Servicing the front hubs and adjusting the front brakes on this behemoth.

Пікірлер: 19
@dw7094
@dw7094 2 сағат бұрын
The CV axles were never a problem. It was always the inner axle seal that allowed gear oil into the steering knuckle. Easiest way to check was to remove a bottom bolt from the steering knuckle. If a CV boot was ripped, gear oil would show up there as well.
@r.g.8416
@r.g.8416 2 жыл бұрын
Thanks for posting 👍
@williamcunningham1614
@williamcunningham1614 Жыл бұрын
Well done. Good job.
@tacticalrepair
@tacticalrepair 2 жыл бұрын
Glad to see you packed the knuckles properly. I hope you backed the hub nuts off 1/4 turn after you torqued them before locking them down. Will burn the bearings otherwise.
@Elliott_Ray
@Elliott_Ray 2 жыл бұрын
Thank you!
@staym925
@staym925 10 ай бұрын
​@Elliott_Ray anything that he tells you is gold, thats the man when it comes to these trucks.
@kristinabelle695
@kristinabelle695 Жыл бұрын
You are Amazing thank you for showing us this!
@Elliott_Ray
@Elliott_Ray 7 ай бұрын
Thank you for the support!
@Jcjohn12dougie
@Jcjohn12dougie 2 жыл бұрын
That place looks familiar man 🤣🤣 miss those days tbh
@o0RageCore0o
@o0RageCore0o 2 жыл бұрын
Inner seals are easier to take apart both fronts the beat it with a long piece of rear from the otherside. Takes like 2 hits.
@victorcarreras2499
@victorcarreras2499 6 ай бұрын
These trucks came to replace the M35A2, the only thing is that they don't have power steering and the brakes still using brakes fluid
@Elliott_Ray
@Elliott_Ray 6 ай бұрын
I wish it had power steering. Would have made my road trip across the country much easier on my forearms
@kingkong9542
@kingkong9542 Жыл бұрын
Hi Elliott, is it easy to work on your truck? Thinking of getting one but want to drive it instead of bringing it to the shop. Please let me know your experience.
@Elliott_Ray
@Elliott_Ray 7 ай бұрын
Having prior mechanical experience is a must. No shop will work on this, so you end up having to rely on the facebook community and all your skills you have acquired in life.
@wingding028
@wingding028 Жыл бұрын
what mods do you need to run the 5ton wheels ?
@staym925
@staym925 10 ай бұрын
Why would you want to run 5 ton wheels, the m35a3 wheels are the same as the 5 ton wheels, you can put 395's and 14r20 on those rims.
@wingding028
@wingding028 10 ай бұрын
@@staym925 i didnt know that at the time
@Elliott_Ray
@Elliott_Ray 7 ай бұрын
As long as you get rid of the Michelin Exploders
Deuce and a Half Custom 5-Ton Tool Box!
16:08
Elliott Ray
Рет қаралды 800
Modus males sekolah
00:14
fitrop
Рет қаралды 14 МЛН
АЗАРТНИК 4 |СЕЗОН 1 Серия
40:47
Inter Production
Рет қаралды 1,3 МЛН
Will it start? m998 humvee
10:42
Picc's Garage
Рет қаралды 165
WC54 Getting ready for the show
32:35
Armed Forces Museum Greenville
Рет қаралды 439
PartialProgress
23:39
Mutawintji
Рет қаралды 144
POV of a 22 year old Concrete Ready Mix Driver
19:24
lexie flores
Рет қаралды 49 М.
M936 Tow Truck
2:43
Rocky Bartlow
Рет қаралды 56
I got an award at the car show (and I got the truck back home)
21:42
Flexor Tendon injury: 2-Month Update After Surgery
3:28
Just a man and his Deuce And A Half
Рет қаралды 68
Caco Girl's Repair Challenge: Restore and repair a heavily rusted 6.5HP gasoline engine.
25:26
Green Iron TV - Episode 77 - Next restoration project!
18:34
Green Iron TV
Рет қаралды 219