Top 11 Tools for VW and Audi Enthusiast

[@Deutscheautoparts]

Purchase VW or Audi Special Tools HERE www.shopdap.com/vw-audi-special-tools-wkz.html

[@Badgertronix]

Triple square definitely the most important VW/Audi/Seat/Skoda tool there is 👍

[@susanstrong2221]

I'm no mechanic, but I work on my, and my families VWs and Audis, and I ALWAYS hated my life when I had to take off or put on wheels. So a tool that saved me from early gray hairs was a *Wheel Hanger.*

[@michaelramey7267]

It's not truly VW specific, but a brake caliper wind back tool can sure make life easier.

[@willywillywillywillywilly]

Michael Ramey Yeah. I always rent mine for free from any auto parts store because I need it so rarely. And, free...

[@lamloremipsum]

Good addition!

[@auxmike]

Got a cheap set on eBay. Without it I never would have. Been able to do my 2015 Jettas rears!

[@jbac5767]

I just did my brakes. 2014 GTI. I bought a master brake tool kit. It has the wind back and push back tools with bracing plates and all that. Heaven

[@adamroman5698]

Paul’s spot on with the triple squares. However I like the rubber hockey pucks for jacking so my floor jack doesn’t ding up the bottom of the jack point. Also, having the wheel nut rod that screws into the hub, it makes tire removal and installs go much smoother.

[@mikehawk8609]

Torx bit set was the first thing I bought for my S3. Best purchase I made. Haven’t done a job that didn’t require it. Then got my triple square set 💪🏼

[@priveprive5315]

is an S3 reliable ?

[@mikehawk8609]

@@priveprive5315 I would say so. 50k on mine and I’ve not had any major problems.

[@priveprive5315]

@@mikehawk8609 thanks good to hear 👍🏻

[@willmercier2852]

My wife stole one of my magnetic bolt trays for her hair pins... universally useful!

[@mikejf4377]

Your triple squares are extremely handy for working on VW’s. Great product!

[@Gdawg246]

I didnt have a set of picks until I watched this video, so I went out and bought them and they saved my ass a few weeks later... they make a lot of things easier than they would be otherwise

[@justincovert6943]

I bought the Torx set from you guys and i can't tell you how invaluable it is. It opens up so many possibility with car.

[@CP-ok1gv]

Those darn triple squares.

[@ame7272]

The Magnetic Bolt Tray is really cool tool. Thank you for this great video.

[@SDARCY118]

10mm socket x10

[@sth801lifestyle]

I'm grateful for these videos

[@MrZimmaframe]

All I can say is get the impact spline/triple squares bits rather than the regular ones. They are stronger and can be used with an air gun. Makes life a lot easier. Good look with your projects everyone

[@DerSpuk73]

Nice, now I need only a magnetic tray and I have a perfect toolbox like DAP ❤️

[@254JROCK]

A real vw expert #1 thing too have ., but good luck finding 1

[@Mdshifat24]

Nice Work 👍

[@WSMDSA]

Excellent video. Thanks from the UK.

[@justinduckett4557]

went to change my axle on my gti and didnt have a triple square so i tried to use hex and stripped a bolt head. definitely recommend getting triple square

[@anthonyfraschilla8298]

I'm not a mechanic but just a big DIYr. I would put Torx bit set as #1, Allen bit set #2 and Trim set #3. Thanks Paul.

[@FayeHadley]

Oh my gosh, YES! This video is so spot-on. Before watching, I tried to come up with my own list, and so many of the tools that you mentioned are things that I completely overlooked or took for granted. PICKS!! SPRING CLAMP PLIERS!! I didn't get too far past the triple square, honestly! Great video!

[@Rhosticks]

I learnt about that triple square socket/bit real quick. None of the regular auto stores had them when I needed a set. Had to order it online and I also picked up a complete set at a yard sale for $10. The 3/8 M12 from the $10 set came in handy with removing bolts from a motor mount. The 1/2 M12 that was in the set I ordered was too big for the tight space.

[@drouxbag94]

Just got a mk7 golf R so I’m trying to learn everything I can to be prepared. Thanks for sharing!

[@2of2DCH]

I love your Black Friday tools sale, every year I get a few more odd tools because the prices can't be beat. Sometimes I doubt I'll ever need/use them, but I can't pass up the sale price. lol

[@tylarcobb8880]

Great video as always Paul! I definitely agree with everything on the list. The only thing I guess maybe I would add that isn't on the list is the fuel injector tool but that's not as common of a part. Seems like way too often the intake manifold needs to come off and that tool is invaluable. Keep up the good work! 👍🏼

[@johnnywiningham7300]

I agree with the triple squares at number 1 for sure

[@JettaRedIII]

Interestingly, over the years I've accumulated every tool you listed except No. 11. Because I have a TT 225 quattro, the Haldex filter wrench is essential if you have earlier Haldex differentials. Along those lines, I have an air powered chalking gun to inject the Haldex oil when changing it.

[@RedondoBeach2]

Add ignition coil pullers and a spark plug socket to the list as an honorable mentions.

[@Damian6Robin]

So so glad I saw this video....I'm about to change the OEM turbo pipe for the silicon forge Motorsports and I am 100% sure I will need a triple set to remove that bolt that is bolted on the turbo....I even saw a video of a guy here that stripped that bolt because he used the wrong tools....home Depot here I go....a set cost only $20

[@lenwoodcruze3594]

Back when I got my 99 Audi A4 1.8T I had source alot off this stuff individually a real pita but I learned alot.

[@gplusgplus2286]

I will either read repair instructions and order sockets beforehand, or start the job with shops open to buy what I dont have. I now always buy single sockets from the same socket company rather than socket sets, its much cheaper this way. Eg I only have inverse torx 14 (for 1.8t exhaust manifold to turbo, the socket set I borrowed didnt have 14 and I broke the bolts), and only one XZN (triple square), each cost about 4 eur for 1/2 size.

[@indonesiaserver2344]

Nice video

[@progmanmike]

I find Torx is a lot more common than the triple square on Audi’s

[@priveprive5315]

Audi on the brake Calipers

[@lamloremipsum]

Good way to link to your store ;) but yes I’m in agreement with your top 10 and order of them.

[@ericlondono4251]

Something weird, but critical, could be polydrive. You can get triple square bits at AutoZone in a pinch, but polydrive is either tool truck or online. I'd keep a couple different sizes of those on hand. Mostly engine stuff, but a lot guys do their own timing chains/belts and a lot of cam gears are held on via polydriver fasteners.

[@user-lg4zm5nj8t]

Thanks for the info. Very helpful

[@bellalhossain971]

So greats ❤❤❤

[@SandrodelGreco]

At opposite ends of the cowboy scale. A couple size torque wrenches, and a massive hammer. 10mm, 13mm, 17mm sockets.

[@johnfitbyfaithnet]

Thank you for sharing this important information listening from Brownwood Texas

[@Cisco2023]

#12 A couple of inter-looped zip ties for pulling the coil packs.

[@jarhead1145]

I'd add in a press kit to that list (not really vw/audi specific but defiantly for DIY'ers), instead of buying whole new wheel hub to get new bearings or new parts like control arms to get new bushings, just buy the part you really want cheaply and press them in yourself. I have two pairs of control arms and what I do with the loose pair is repaint and press in new bearings and have them ready when the time comes for new bushings.

[@jeffk464]

I would say by far the most used tool for working on cars is the 1/4" air ratchet. No way you want to be working on cars all day without one. I had a lowly craftsman that worked flawlessly for 2 years of non stop use, and its still working I just don't do that much wrenching anymore.

[@বিনোদন3.0]

Nice

[@jcarey1010]

Triple square cand the torque bits were the 2 I figured you would want in there the most. Gotta have them. Thanks for the info

[@gmctech]

yup you nailed it! TRIPLE SQUARE, TRIPLE SQUARE, TRIPLE SQUARE! Did i mention triple square? LoL

[@nicholasbaker2904]

Do you have a recommended set or sizes a set should include?

[@MrJObajobas]

I would add brake piston pusher and auto brake bleeder, god these things are awesome to work with. Also spark plug wire removal tool and a spark plug socket with holder, you can get these really cheap on the internet, and even the cheapest ones do their job well.

[@naimulislam9490]

I like it ❤

[@cobsonjobban9210]

Your forgot the 18mm wrenge, where I'am from this is not included in any set and you need to buy this size. Without it you cannot change ball joints, front springs ect...

[@rupdigital885]

nice

[@Darjan_Spasojevic]

Vw hose clamp tool is the biggest help so far to me.

[@gmans7859]

Blue Threadlocker, Quality Torque Wrench, Anti-seize...

[@juantwo322]

I own an 08’ VW Passat & a 11’ BMW 335is... What scan toll do U recommend for both cars ? Preferably one that can reset the airbag fault as well. 😉 i know the rear break calipers don’t release when changing the pads unless U have one 🙁.. I’m will willing to spend a little more dinero 💰 if it’s worth it 🤔.. I also own a 10’ Ford F-250 Super Duty pick up, but that’s a hole other story & I rarely ever have an issue 🤫..

[@LoveLife-xy9ir]

Awesome vids mate

[@x-man4702]

I own all of those tools😁

[@johnmoser2689]

The hose clamp VW specific pliers are a must have and the triple squares are my number one too an oxygen and acetylene torch and a good welder are for any automotive shop

[@seanthepowerdavies]

Good video this. Thanks

[@Matt.R.B]

Brake caliper tool... And also a really great mechanic... For when you screw your stuff up. Hahaha😅

[@naturewise966]

I think it would be cool to see a Tiguan build shopdap

[@mlwebb3143]

Add some extra T30 torque's bits they are very common

[@kitecattestecke2303]

VW Time to buy special tools yay

[@andywt8460]

Triple square, you need backup supply... have broken 2 - 14mm recently on T4 suspension bottom ball joint, one loosening and one angel tightening 90Nm + 90deg, admittedly both old but were quality brand, replaced with Hazet which is what VW use, if you don’t know every hand tool with part number in VW workshop manuals is a Hazet. The triple square set in the vid is really amateur duty, if you’r gonna do more than weekend on your car, 10mm and above needs to be quality this applies to triple square and Allen, Snap-On, MAC, etc or Hazet or other German brands if you can find, Hazet Gedore etc may not be shinny but they do the job every day.

[@Wolfpack310]

Man every garage in sweden has those tools both professional and non professional.

[@MegaMetinMetin]

Triple square can be used by a hex but only try for low torque

[@wyo906]

Relay tester, spray electrical cleaner and vacumm bleeder for antifreeze. Vw and Audi cars are known for eletrical problems. Most important tool money to pay for all the parts.

[@jsplasha]

Get the highest quality torx bit sets you can

[@nycr6biker796]

Allen keys work In Triple squares.

[@taylordarr3]

I feel like the most important and probably most frustrating to lack is a magnetic pick up tool!

[@Deutscheautoparts]

good call

[@jeffk464]

yeah, useful. Not sure the most useful but up there.

[@gerardo1357a]

Nice vid as allways, and would defenitly be the same order jaja, only missing the suspension kit im a DIY so dont need it urgently, can you help me out, about to do an auto tranmission maintence on a 6 speed, Not a DSG one but I think its the 09a think so not sure dont have the filling tool do you recommend I proceed or suggest to get the filling tool. Keep it up!

[@farrell19075]

The link for #7 (wire terminal set) in the write-up is no good, doesn't work

[@youngrios]

Is it bad I don't know how to use even half of these tools. Only one I might start and get is the obd11

[@heavenlyhatch6219]

Triple squares need thos like right now 😥

[@1kgking]

Thank God (whatever sadistic entity it is) for DAP.

[@DavidMortaz]

Your Store links causes Chrome to issue a safety warning !!

[@KGInmon]

You missed the 10mm socket

[@Deutscheautoparts]

Make that 3 10mm sockets

[@mickholgate3347]

@@Deutscheautoparts funny you should say that, there's a place here in Australia called VAG Parts www.vagparts.com.au that send me a 10mm socket with every order i place, how cool is that!!!

[@coache1nine]

AutoZone has a 10mm socket set. 10- 10mm sockets, 1/4", 3/8" drives, different lenths

[@jeffk464]

Works for Nissan too, you can do almost everything with a 10 and a 12.

[@connorm2279]

Does the OBD scan tool retract electronic parking brake pistons. I want to change my brake pads myself but don’t want to spend £200 on a scan tool.

[@IvanMilenkovic1975]

Yes - I'm a long time (and a very happy ) user of OBDELEVEN pro...

[@AnthonyvanHamond]

I know you guys are US based, but can you tel me if EU VAG cars also use Triple square? In this video is see Triple square fastners on the front brakes... my EU bora (jetta) has HEX on everything???!!?!?!

[@myk3ch1chas196]

Link wire terminal don't work....

[@HenryPetry]

A wheel hanger lug bolt guide

[@gmans7859]

Or like we did with BMW's, swap to Premium Quality Studs...

[@zerofuckkksgiven8027]

Where’s the docking pumper?

[@colettedelbridge834]

I need to know what specific tools for I need to change my Starter

[@whatsup8464]

What model?...if its Audi a4 16mm spanners...13mm socket...

[@mlewis-iversen]

Mental how many specialist tools are needed! I've only ever owned Hondas and Toyotas and all I've ever needed is a socket/spanner set and some screwdrivers. Trust the Germans to unnecessarily complicate things.

[@Quibjeb]

Coolant pressure test kit

[@markbaum9615]

Black electrical tape...to cover the chech engine lights...

[@annwalsh1804]

Mark Baum 😂

[@rayc1503]

Lmao 😂 😉

[@RobertLeBlancPhoto]

Yup. The ole CE/TPMS light delete kit.

[@hlaw2830]

This little light of mine, I'm gonna let it shine...

[@jeffk464]

smart

[@traffikkk]

Hey Dap, Most of your installs and projects are all on GTIs, subconsciously are you telling me to get the MK7 Gti instead of the MK7 Golf R? #AskDap

[@robybravender8525]

I have a 2003 VW Jettea . Sometime it will not go into reverse can you help me. Tell me why it is a nice car.

[@richiel.788]

Roby Bravender first you should do a shifter alignment, check out diesel geek videos for more info.

[@mechanicalmanny494]

A sledge hammer

[@imranpatel7454]

Vcds is what you need..proper sales man 'extremely difficult' to take off wires how old are u 3 years

[@willywillywillywillywilly]

Imran Patel wat

[@francoisloriot2674]

what does this mean?

[@moneyparhar]

Best tool for Audi BMW tech is sledgehammer. Fixes everything with ease 1 sledgehammer 2 sledgehammer 3 sledgehammer 4 sledgehammer 5 sledgehammer 6 sledgehammer 7 sledgehammer 8 sledgehammer 9 sledgehammer 10 sledgehammer

[@dnkomos1]

What is difference between TSI and TSFI engines?

[@Phytopathology]

I got the fault code 00573 - Steering Torque Sensor (G269) 008 - Implausible Signal. Any ideas?

[@tmattibot]

Your website dosent work for me..

[@Casualty35]

Sucks that vcds is for windows only and obdeleven is for android only.

[@ac1143]

#1 Credit Card #2 Lube

[@254JROCK]

I drove into a sevice station and the owner ran over too me and said. Thats a 2013 jetta are u crazy 😜 we would never work on that u need a VE dealer only. Fml

[@098cpt]

I dont agree with oil socket tool. Its too small and always fck the plastic nuts. A universal wrench is way better and it will work on bmw , acura, nissan, name it

[@macro820]

Oil filter housing tool? Really? I can just turn it by hand or use a spanner wrench

[@hoosenkhan8553]

Preproto good luck turning it off by hand let me know how dat works out for u👍🏼

[@MrJojo8675]

You forgot the can of gasoline and matches to really solve the problems that VW/Audi engineers into their disastrous, money-pit, heaps of shit.

[@francoisloriot2674]

and regardless you are still wondering what tools you need to repair one

[@alexgray9136]

Forgot a vape

[@adisadis6313]

The best tool is to stop pretending everyone be mechanic and sto being skrootz and give money to authorized personnel for his car maintenance