DeWalt DCF680N1 powered screw driver Review!!!

[@leohiggins7737]

This is the very best review I have seen out of a dozen. Glad you pointed out it is not for driving screws in Construction but perfect control for electrical work etc. Thank you

[@jonhill373]

It’s nice to see you use it for what it’s made for. Only professionals understand the importance of choosing the right tool for the job, but then again, professionals have enough tools that they can do that. Joe homeowner many times asks one drill driver to perform many functions. Or they might switch out a duplex with an impact driver. Just the nature of people and things.

[@jamessutton3461]

I'm seriously looking to get this soon, already have a collection of DeWalt brushless drills, but I'm looking for something compact and light duty for basic electrical work. Going for the 2 battery set though.

[@OldTownGuitars]

Just ordered one of these. I’ll be using it for instrument repair work, so the clutch is a big selling point, as I’m always worried about stripping out the holes or screws on the small screws used on guitars/mandolins/etc.

[@cstar2839]

Good honest review. Thank you

[@MrJoefoefrombuffalo]

Just received mine in the mail. Did you get any bits with yours? Mine didn't come with any. Just realized how old this review is. 4 years later still like it still working as good as it did found anything better?

[@DanielWoodell]

Nope no bits with it, I like it so much I ended up getting three of them. One for electrical tool bag, one for in the shop one for in the house. I love that little thing!

[@MrJoefoefrombuffalo]

Please consider doing a review on the flashlight that uses the same battery

[@leohiggins7737]

Just got one on Amazon with 2 batteries for $ 109.00 delivered on prime.

[@cjcharles8063]

Thank you for this review. You put a lot of thought into assessing the screwdriver and how well it works. I have a lot of trouble getting the bits in and out of the bit carrier and bit case. I try to push them into the slot and it may be that they will loosen with use. Any suggestions in the mean time?

[@davidwmcinturff]

He mentioned wd-40

[@socal_expat1856]

Thanks for doing a thoughtful review. It gave me some good insight 👍

[@jarrydee2799]

This seems like it would be perfect for those long ass screws that come with blank cover plates for plastic single gang electrical boxes

[@Memo740i]

After six months of posting the video would you still recommend it to me. I'm not sure if i will like the gyroscopic though but I do love the design and the size.

[@DanielWoodell]

Yes i would recommend it after using a bunch. i have found that i turn to it more than i ever thought i would.

[@Memo740i]

I'm about to get my Eelectrical & maintenance certificates and I know I'm going to need an electric screwdriver for my switches and receptacles.

[@Memo740i]

Thanks for the info. 👍

[@DanielPerez-iv7rh]

Would this be good for hvac service work

[@bradyoung6739]

You put the bit retainer on backwards.

[@jamessutton3461]

Am I a weirdo for using Hoppe's No 9 gun oil on a lot of my tools instead of WD-40? My rationale is that it's designed to lubricate and prevent corrosion on steel exposed to the elements rather than simply displace water. There is a price difference though.

[@SKWDMDYT]

Why don't you have an Amazon store or links lke the rest of KZbin to get commissions. You have a really good DIY channel. I'm sure many have asked what your day job is and how you afford all of your toys as well as find the free time for all of your projects.. Electrician based on this video?

[@DanielWoodell]

I started doing KZbin because I used KZbin to find out how to do stuff; when I could not find a video on something “like installing a septic system in WA” I figured I would give back a little and make my own video about it. I did not start making videos to make money; my brother is the one that convinced me to monetize my channel. I work for DOD. Also time is a big deal for me I try and post weekly, but with my normal job and my family it’s really hard to get the time to film and edit. Maybe one day will do a run of t-shirts, but I can’t see myself doing it for a lese another year.

[@Mougharbel]

Expensive for what it is ...to use in the house for light work .by the way it’s few dollars less than tdewalt basic 20 v drill

[@baconbot3106]

Yo your bit holder is on backwards

[@DanielWoodell]

I put it on both ways and it was still a problem, mostly my fault as i push the drill into a cloth work belt and the bits get hung up on it the glue did fix the problem for me though.

[@mostafafalah4361]

is the battery charger 110 v or 220 volt no one mention that ?

[@DanielWoodell]

Its a 110V charger

[@mostafafalah4361]

@@DanielWoodell OMG thanks , please how can i ask them to give me the 220 type is there a part no for it ?

[@mostafafalah4361]

i also need dewalt DCD996P2 I dont know how to ask for 220 v instead of the 110v :(

[@OneLiterPeter]

Hey Einstein... Before you go gorilla gluing that bit holder onto the top of the driver... flip it around 180 degrees. You might find that it actually fits and stays in place.

[@DanielWoodell]

I did and it did not. mostly my falt as i push the drill into a cloth work belt and the bits get hung up on it the glue did fix the problom for me though.

[@anwerkamaly3765]

@@DanielWoodell And I famous for Tony added do I and One tagged the mean get them Align when and eskandarian Alarm to me Telephone 0 nasha a 012 84497374 SME and/or challan 3 Ankara bet Article read alia

[@elfri1738]

@@DanielWoodell Not to be toxic but it's also a screwdriver you kept calling it to drill which is likely why you don't like the swivel function, However, this is an absolute must for others out there buying an electronic screwdriver. I have to work inside ovens and dishwashers and behind panels that you have to reach into, you wouldn't be able to unscrew if it was shaped like a drill, there just wouldn't be enough space for the tool to fit. Without this feature, it would literally be a piece of shit.

[@mcgurtytv1868]

Pretty sure you have the wrong serial number the one you’re talking about is end with N2

[@dunner8125]

I not sure if wanna gamble puttin a drill in breaker box

[@twiffy10]

wanted to see and hear it in action yet you fast forwarded those parts.

[@พรณรงสว่างทิศ]

ประเทศไทยไม่มีขาย

[@TheMcs33]

Hater

[@73superglide62]

im not fans of walt tools

[@patteioval3109]

why you watching a video and you comment about it then lol ... non sense ...

[@joeframer9642]

Spend your money on English lessons

[@BigChieff]

@@joeframer9642 what a prick you are .... im assumimg you're perfect ....

[@joeframer9642]

It an inexpensive woman's drill for putting toys together or face plates..... improvements? Seriously....get a real drill and pouch