Dewalt XR vs Atomic Impact Drivers

[@cablenowadays6586]

I’m a HVAC guy and i’ve used my 809 for about 3 years every day and i’ve dropped it a couple times once off a scissor lift from 30 feet and it still worked fine. All it does is take our 1/4 5/16 3/8 head screws.

[@steveblankenship7643]

I’m glad this looks like it turned out to be a solid choice. I kind of just stumbled upon the combo kit and didn’t have an impact driver at all and decided to pick it up.

[@ajaugatarip5285]

Been using my 850 every day two weeks from now and I have no regrets at all. 887 been on my tool box since a went to my local depot and bought the new atomic. I even test it against my 887 and it really performed really well beating the XR in almost every test. I’m a drywall framer

[@weirdmood8102]

How has the 850 held up for you.

[@garye.6317]

I do love the small size of the Dewalt 850 and the power, But I will sacrifice power etc to precision and that’s why I am a huge fan of the Makita XDT16 it’s also compact as-well. I just prefer it because of the different modes you can place that tool in with the touch pad to allow the tool to be more precise in delicate operations.

[@phillipwickens8488]

U can get the 850 with the mode selector

[@scottymagillacutty]

Great giveaway! I bought an 887 combo 6 months ago. Thanks for helping me make up my mind on the purchase.

[@paidinfull5950]

I’m in the service business and use mine daily, I have a lot of dewalt tools and my nail guns are now cordless. I use to get the cheap atomic combos back in the day and when the xr came out I purchased it and it rocked so I’ve stuck with them ever since then, I will say I’ve had to replace my impact driver twice due to the power surge issues. The drill driver has been a beast and fine. I’m going to get a new atomic just because it looks cool and seems legit.

[@dalebishop2185]

Hello from Illinois... below Springfield here... I enjoy watching your channel.

[@ManCaverTools]

I thank you Dale

[@nestummutsen5251]

You are close to Milwaukee

[@jackofalltrades123]

You really have the best tool test reviews! Big fan man. Never stop pumping put these vids!

[@ksichelstiel]

Great comparo. I have the 809 but seriously thinking of upgrading to the 850. This video helped! Thanks!!!

[@Fictitious_Character]

New 850 looks pretty good and performed well too. I'll be interested to see if they do a new XR compact impact driver. Either way I currently have enough drivers so no reason to rush out for a 850 even with the awesome size. #beltsandboxes

[@normferguson2769]

I have the XR driver because the HD sales associate told me the Atomic was coming out for DIY weekenders and not for tradesmen. I don’t recall even checking the price difference.

[@ManCaverTools]

the dcf850 is a fantastic impact driver

[@KingYang05]

Just came on here to Like the video. Be back to watch it later. Keep it up MCT!

[@ManCaverTools]

I thank you King

[@jaycarneygiants]

03:29 Im curious as to why you didn't give the dcf850 more time to complete the lag bolt?

[@josephhughes2784]

It's amazing how small these new compact Drivers are getting. The size gets smaller but the performance remains the same. #BeltsandBoxes

[@erik34]

Switched over to this from the football game once I realized you had a new video up. MCT is my life. #beltsandboxes

[@ManCaverTools]

I thank you for your sacrifice Erik :)

[@erik34]

@@ManCaverTools You bet, Dave!

[@westmanjoel]

This was great. I have the 1st gen Atomic impact and drill. While the new one is a little better, it isn't quite enough to get me to upgrade (yet). The Atomic is still a huge upgrade from the Black and Decker stuff I had before. #beltsandboxes

[@slamminsmitty5284]

Strong work MCT. I’ve enjoyed watching you progress with your videos and livestreams. You’ve inspired me to create my own tool channel once I get out of college. Keep up the good work and be safe. #BeltsandBoxes

[@Sicada94]

That 850 has been my best purchase ever

[@ManCaverTools]

I love that impact driver

[@2013Drama]

At work I use the 850, awesome driver definitely want my own and will seriously consider the new stubby!! Thanks brother!! #beltsandboxes

[@adu1978]

Awesome I’m all makita but like the dewalt range

[@kenparritt4475]

i just bought the 887 , really like your videos

[@conspiraciesexposed7760]

What’s the drill bit for the lug driver

[@backwoodsbrooksknives4625]

You can get bothe the dcf809 and dcf709 with two batteries and a charger right now for just under $200. I'd say it's still a good deal.

[@dav1d629]

At 8:42 it says 997 instead of 887 right?

[@chriswiseman3490]

Dave awesome content new to this channel stopped watching other tool reviews keep up the great work

[@chriswiseman3490]

#beltsandboxes

[@praghakahnful]

I have the 887 and have been happy with it, but that small size looks something that I could get into. Hopefully the next gen brings more power. #beltsandboxes

[@johnq6123]

New Atomic vs 12v Extreme DCF901b, thoughts????

[@joseandalon3851]

I was waiting for this head to head. Been thinking I want the new Atomic (have the 887) this makes me want it more. #beltsandboxes

[@VICDOG]

I switched from the 887 and I didn't think the weight difference was going to be noticeable but to my surprise, it is. In performance is not a HUGE difference but there's a difference for sure, I do recommend the new atomic 850. I use it daily, BTW

[@noahsingleton5867]

Sticking with my 887 until it breaks but that small form factor sure is tempting. #beltsandboxes

[@beardedtoolreviews7185]

Just got mine today it’s almost just a handle with a chuck. Lmao pretty zippy impact tho

[@UncleIvan1]

you should try makita DT172D impact and see how you feel

[@bomdsaber3587]

DCF850 👍 The best tools! Hug and sucess to your channel. 🤜🤛 SUBSCRIBED

[@scottdezieck7056]

All good contenders..... would like to see you use 6 X 6 pressure tx wood and stack them if you have to just to give a more consistent wood density to show the differences without issues of what that log can cause. I'm not usually putting lags through logs haha. Thanks for the video. #beltsandboxes

[@keonsears9140]

Great video. Please don’t stop making them. #BeltsandBoxes.

[@rok-n-rob]

#beltsandboxes Anxious to see your conversion of the DCF850 impact driver to 1/2” impact wrench

[@robertfrate9738]

Hi rob, this would be interesting the anvil from the dcf901 swop into the 850, very interesting lol,

[@robertfrate9738]

Hi Dave, all of them did awesome for me, the 850 didn’t fail for me, you sent a boy to do a mans job and it did it, a little bit is not a big deal for me, it’s a awesome tool I give it excellent performance, just my opinion,

[@ManCaverTools]

its my new favorite impact driver

[@robertfrate9738]

@@ManCaverTools mine to, I’m very impressed how powerful it is and it’s tiny lol, Dewalt’s done it again, your demonstrations are quality Dave ty,

[@samsung-eh4dv]

I bought the Atomic for a home renovation. I’ve been hearing mixed reviews. I like it but I have nothing g to compare it with. Do you think o made the right purchase?

[@kidzeus2433]

I also bought the atomic and I would have to say that it is worth every dime. It is very well built and has a lot of power especially when it comes to removing lug nuts. The only difference is in power, if you want even MORE power you can upgrade to the XR.

[@KMEnterprise]

At work I have a dewalt drill and 1/2”impact wrench. And a 5yr old Ryobi brushless impact driver. I was recently considering “upgrading” my driver to a dewalt. But shocked to discover every model of dewalt I can find has a lower torque rating then my 2000 in-lbs ryobi. 😮

[@onsiteelectricianscott4025]

Great review. Keep em coming

[@emilepmartin]

Awesome content as always Dave, keep up the great work! #BeltsandBoxes

[@tensazero]

I'm going to just make a guess and say that the impact 887 is going to get an update with the new wrench body with press buttons. That will be the new XR impact.

[@jacobsebastien3910]

I much rather the switch over the buttons.

[@kdc300z]

Atomic over Makita xdt16? I don’t understand this thought process.

[@bobbyRC2]

Can't wait for the Halloween special! Also can't wait to see whatever #BeltsandBoxes puts out then too

[@TsunauticusIV]

You misspelled the hashtag. Idk if that would mess your chances up of winning or not but wanted to let you know.

[@bobbyRC2]

@@TsunauticusIV thanks for pointing that out!

[@TsunauticusIV]

@@bobbyRC2 yw 🙏

[@PadmaDorjee]

Great video and honest comparison. Will the Atomic be released everywhere around the world? I am in Australia. Thanks

[@wesbell419]

I have the xr and love it. However I have never used an atomic before.

[@nrh7ten892]

that DCF850 is going to be pretty sweet impact driver with the new power stack batteries. #beltsandboxes

[@hewlett260]

When are you going to test the dcf 840

[@MonkeySpecs301]

Do ppl usually drive lags without predrilling?

[@OUTILSCLIPSQC]

Please dave if you make a versus video again milwaukee please use a high outpout baterie not like ttc

[@ManCaverTools]

that is the plan :)

[@OUTILSCLIPSQC]

@@ManCaverTools 🍻🍻

[@mics3747]

The new impact is like 2 tools in one. It is an impact & (almost) a right angle impact. #RealNiceLike! #beltsandboxes

[@andremedina1389]

Would you say it’s more powerful than the xdt16? I’m trying to decide between the two.

[@minimopardaytona]

#Beltsandboxes keep up the good work man. You make great videos 📹.

[@ManCaverTools]

good afternoon, I just wanted to say that you are the Winner for the $200 Ohio Power Tool gift card. Congratulations, would you messege me on Facebook please.

[@stopwar2712]

thank you! interesting video

[@redknight2470]

Good video, was curious to see how the new Atomic would stack up to the 887 #beltsandboxes

[@CL-nj3zs]

Need you to test DCF921 vs the milwaukee gen3 stubby impact wrench #beltsandboxes

[@andrewavellino6427]

Dave is an OG #beltsandboxes crew member, man the first member.

[@dmacl123]

Great video!! I love OPT. Thanks for doing this. #beltsandboxes.

[@Dale37]

#beltsandboxes I always enjoy the content from both channels.

[@xJI00]

Are they trying to move the Atomic range from handyman / DIY to trade ? I’ve kept away from anything with Atomic on it for my trade tools so interesting to see the results here.

[@b-2466]

I believe they are. Atomic actually just means compact. It's their compact line of tools but I agree, I wouldn't buy anything atomic before. Things are changing in dewalt land.

[@spikester]

​@@b-2466 I see this also, new tools like the low-range DCF923 impact wrench now have the nice push button speed/lamp controls like its 2 bigger brothers but bears the atomic label. It no longer means a cut down version of the full XR tool anymore, but a full featured modern compact tool, for example the newer compact 1 3/4" bandsaw also has the atomic label yet its a full quality tradesmen tool for the conduit jockeys. Overall it makes the brand less confusing now knowing you aren't getting a 'cut down' version of the tool anymore just because it bears the atomic name like when the lineup was first introduced. Cheers.

[@austinkackley3057]

#beltsandboxes I love all the hard work you put into making your videos all by yourself! Props to you my main man

[@jacklacaze2604]

#beltsandboxes Sooo EXCITED I just picked up the 850 yesterday! NICE to see it works so well! Thanks for the video!

[@nicholastomlinson1952]

Seeing the speed bore fall out the new atomic makes me wonder if the single ball bearing is having the same trouble as the milwaukee gen 3 with bit retention

[@ManCaverTools]

it does only have a single ball bearing

[@erik34]

Gosh, I sure hope not. Figured we had learned our lesson from the Gen 3.

[@nicholastomlinson1952]

@@erik34 I guess their is always the possibility that the colet snagged the wood and ejected the piece

[@terriblet9810]

I think I need to sell my original Atomics and get the new ones.

[@ManCaverTools]

worth it

[@AdrianHernandez-oi9ij]

Best reviews and tools tests, helped me find the right tools for the wife and for my work field . Thank you #beltsandboxes

[@marsone2004]

In uk the Dcf850 is under XR line

[@ManCaverTools]

that is interesting to know, I thank you Mars

[@haterskeephatin101]

The 850 is nice but dont think I'll be driving giant 8 inch lags going to get the 809 on sale and save a couple bucks

[@zanematthews2841]

Flex is going to DOMINATE LOL. #Beltsandboxes

[@TheCasualCs]

Rocking the dcf850

[@ManCaverTools]

love that impact driver

[@wrothacker4]

Check out the dcf840. Seems quicker than the 850

[@vsar1938]

Two things detract me from that impact. The fact that the speed bore fell out meaning it might have a bit retention pin issue similar to that of the older m18 gen 3 fuel and the fact that it does not have the new selector mode dial that the impact wrenches do... like why couldn't they just put some effort in to incorporate that into this to? That selector switch is truly maddening have used it not a fan whatsoever!

[@rasecgarage4337]

#beltsandboxes I’m very anxious to test the new tiny atomic driver. I’m waiting for the bare tool, I don’t really need another 5ah battery.

[@kiaumax7523]

At what price would the 887 still be worth considering? #beltsandboxes

[@metricstormtrooper]

After years of faultless use of Makita battery tools I decided to try DeWalt XR It started when the drill in the kit had NO SECOND SPEED GEAR FITTED, after getting a new kit, my 18v drill put out lots of smoke when drilling a hole in steel with a drill my Makita drill would have had for breakfast. It was repaired under warranty but I haven't trusted it yet, after 3 months the impact driver bit retainer broke, it was replaced and lasted 4 months then broke. The angle grinder Still works but the detent on the tool lock spat the dummy (pacifier to merikans) I will NEVER BUY A DEWALT TOOL EVER AGAIN. PERIOD.

[@lachlankren4231]

so 850 is basically faster, but doesn't have the high end torque that the 887 or even earlier atomic 809 has?

[@williamhorton9940]

The review was great but I feel it would have been better 5ah across the board

[@bennytorres4557]

#tools and boxes thanks cause I have all the dewalt tool you are reviewing

[@OUTILSCLIPSQC]

Has always great video

[@Coxfame]

I was debating on switching to fuel because of their compact drills but they're so pricey... And I have so many yellows... After I found out DeWalt released 850 and in December 2021 releasing smaller, lighter & more run time 20v stack lithium batteries... I ain't going no where. #Beltsandboxes

[@jarrydee2799]

Those batteries do not have more runtime, they crap out faster than a 2ah, they just put out a lot of power very fast. That is why they drain faster.

[@wondon2992]

Man it always was that way but honestly their about the same with DeWalt being a little more now lol

[@luisriver11]

I love your videos man!!!!

[@Harveygeeding]

How are you doing Dave ;?? Good video man I like the new inpact drill but I wounder if they are thinking of making a drill driver for the inpac the same way ?? I guess it's just a m18 stubby with black and yellow but who cares it's cool #belts and boxes

[@Steve-sv3ln]

Do XR batteries fit the new gen atomic tools?

[@ManCaverTools]

yes they do

[@dtran22]

OG! #beltsandboxes I want the new Atomic 850 Compact so bad! 🙏🏻. Still running the 809

[@jasonhemann3517]

My m18 surge today died. My 887 has had 5x the use

[@TheSirPotato]

#beltsandboxes been waiting for this one, was wondering if this was a more modern 887. Also are you gonna test the new power stack battery, when it is available?

[@jemarksanchez6644]

Love the videos, keep up the awesome work #beltsandboxes

[@DizzyKnights]

Love my dewalt just bought a house and trying to get more diy tools good video #beltsandboxes

[@LilasTools]

The new Atomic is a winner for sure!

[@7357kicker]

Good stuff man keep it up. #beltsandboxes.👌

[@AVwizard]

I have been waiting for this comparison. #beltsandboxes

[@weldonpinder7295]

Flex is gonna win for sure between that and the hilti. I love to watch your vs videos but I can tell alot of times whose gonna win by their performance from previous videos

[@justinrozon7]

Just curious, do you prefer the hilti over dcd998 power detect?

[@anthonyland400c]

#Belts and boxes love your stuff keep it up

[@anthonyland400c]

#BELTSANDBOXES

[@juanc5149]

The 850 might be DeWalt ‘s top of the line impact driver for now….. But we want a rematch! 887 vs 850 with same size ah batteries, vs a new contender the skinny dcf840 replacing the dcf787 much the same way the 850 replaced the 809. All with same battery as well! Will the 840 best the 850?? And for battle of the brushless DeWalt bargain bins. Who wins the dcf809 or the dcf787??

[@jimlengel9898]

Like the videos, keep them coming. #beltsandboxes

[@MrRubenrivera9649]

Love your videos

[@TsunauticusIV]

Lol that editing was awesome #beltsandboxes

[@Leeroy2586]

I'm excited to get my hands on the new batteries #beltsandboxes

[@ManCaverTools]

I am as well. I wanna see how they perform

[@MountaineerMapleDIY]

Great video! The new 850 looks awesome! Have they fixed the 887 "smoking" issues? I saw it on other channels. #beltsandboxes

[@jacobsebastien3910]

Yes, Much Better internals than the 887

[@hmoreno1353]

Keep up the awesome work sir! #beltsandboxes

[@jamescabrera3655]

Great video and new Atomic is impressive - especially for the size. #beltsandboxes

[@ferndogg4427]

I just bought this compact drill, i noticed its little louder then my other dewalt impact drill