Deye 3-Phase Banking Inverters using 16KW hybrid single phase

Updates on initial test and performance..
#renewableenergy #solar #deye #energy #solarenergy #hybridinverter #greenenergy #energymechanicplus #deyeinverter

[@mariano-df1sd]

Hola amigos mi conclusión es que generar trifasica es comprender fase A,B,C en offgrid sin importar la trifasica que entra por red/grid saludos

[@EnergyMechanicPlus]

Hello friend, Yes, the system will work effectively in both off-grid and grid-connected 3-phase configurations. This Deye single phase hybrid Inverter banking supports WYE (HV 380V/400V) and Delta (LV 230V) configurations, even under full unbalanced load conditions. It ensures 100% output power per phase, providing reliable performance in various scenarios.

[@pilotdrh]

Very nice. With most countries having specifications for about everything I was always irritated that phase rotation wasn't spec'ed. In the US when I started in the power business the incoming grid was about 60% clockwise. When I retired in 2021 it was about 80%. But most of the 3 phase motors are shipped for clockwise rotation. I don't know how many jobsites I've been on with emergency generators or emergency systems where the grid was opposite the emergency source because the electrical contractor would not check the grid rotation prior to landing the generator source. Generators always came wired for CW unless specially ordered which was very rare in my experience. So it would be sit around and wait for the cabling to be switched or return, depending on the size of the system. Looking forward to the next "phase" of your project.

[@EnergyMechanicPlus]

Yes, you are absolutely right, my friend, especially when it comes to generator connections. Although this topology can also be reversible into CW 0/240/120 just by switching lines, then checking the phase rotation to verify. This setup operates in DELTA 230V using Deye single-phase hybrid inverters, and it can also be configured into WYE 380V/400V. I really appreciate that you’ve been following my channel, and very soon, I will post the complete wiring guides on how I made these connections. Thanks again!