Diagnosing Brake Lever Sensors

[@1362ha]

1. Flip the bike over 2. Look for the serial number under the crank 3. Find the black wire connected to the sensor, the sensor is the rectangular piece next to the chainwheel 4. The sensor itself has a screw in it the connects it to the bracket 5. Loosen the screw all the way and remove the sensor, then with your thumbs push the sensors bracket in toward the chainwheel til you get the paper thin spacing. Place the sensor back in to ensure you have that spacing and tighten back in the screw. 6. Flip the bike back over power on battery then the display. 7. Take the bike for a 5 minute ride and everything should be working like it should.

[@claydavidson13]

thanks for the direction.. I am working through this issue as well...

[@thomaskhalil4323]

Can you send the link to buy a brake lever? My brake broke

[@jeanq.687]

Tell them to send you another controller