Diatone SNT Just Air Series Q25 Micro FPV RC Car

[@RCEscape]

www.diatone.us/collections/rc-car Get the ensemble if you are a beginner. You can use the fpv goggles with other fpv drones. If you already have a tx with flysky afhds protocol and you have fpv goggles you only need to get the car. Found out that the vtx button actually turns on and off the vtx so don't do what I did with the vtx power cables leave it where it is soldered. 00:00 musical unbox 02:30 intro and closer look 10:56 remote controller 13:05 fpv goggles 14:41 drive test fpv 16:47 line of sight drive test 21:41 final words

[@johncarold]

Well Diatone at it again, The new and improved version of the RC FPV car. It's video is on A1, A3, A5 and A7 so if you want to use your own googles you can. I have been driving my RC cars with a AKK aio camera/vtx and it's a blast to try. I really like this one for your kids are able to drive around your property. Unfortunately you need to learn to turn using your right hand. But it's easy enough to do. Thanks for the video and information on the Q25 RC Car.

[@RCEscape]

I have the Turbo Racing micro rc cars equipped with aio vtx for fpv too. I would rather have bigger rc cars for fpv but I'm liking these for how small they are and can fpv on the kitchen floor or even on the desk top :) Thanks man!

[@GTARC_au]

Have one coming also. Looks awesome! Can't wait to review! SP.

[@FrequentFlyerRC]

Cool looking car! I have the "mystery" metallic grey color. You need to solder the VTx back onto the pad that you thought did not work.. The pad can be toggled on and off with the transmitter! At first start, the button next to the multi function button (VTx button) has to be pressed to toggle on the VTx! 👌🏿

[@RCEscape]

Aahhhh! That makes sense. Lol! I thought the vtx button could have been to change the channels or something like that. I will solder it back! 👍👍

[@RCEscape]

Haha! It works now :) Thanks man!

[@capeRCouple]

looks like loads of fun and not a bad price for what you get

[@RCEscape]

Yep! The fpv goggles also records so you can use it on your fpv drones.

[@electroddxful]

Great review Pete 👍🙏👍🙏

[@RCEscape]

Thanks Ray!! Fun little micro. Kids are having fun with it too :)

[@gdhall5311]

Nice little fpv car Pete. BTW, I received my TX 12 transmitter the other day and it came in mode 1, can I just switch the sticks from one side to the other for mode 2?

[@RCEscape]

Thanks Greg! Yes, swap the gimbals and change mode to 2 in the systems menu radio set up page.

[@gdhall5311]

@@RCEscape Thanks Pete

[@my3sons386]

My recording indoors the fpv was glitching, but yours out side was perfect. Why does it have glitching? Indoors? Wrong channel? Next to big RC cars?

[@RCEscape]

It shouldn’t glitch indoors if you are in line of sight. Maybe sister channel.

[@pixelpeter3883]

Looks like fun! You don't need a massive amount of open space to have a good time with something this small; surface needs to be very smooth tho.

[@RCEscape]

Absolutely! But if you can find somewhere large like a basketball court, this little thing can shine and you will have some good fpv fun!

[@MelOmaHcss]

Thanks for that good review! How long this car can work from one charge FPV mode and no FPV? Thank you!

[@Counterhoe]

Hi, my goggles won’t connect to the camera. I tried the search button but nothing shows up on screen. The car is charged and goggles are charged as well. Please help, just bought the product.

[@RCEscape]

is the vtx on?

[@UmarRCz]

Is the 18650 battery in the remote controller rechargeable? So you can charge it with a charger or is it non rechargeable just for one use and then have to buy another one?

[@RCEscape]

The battery is rechargeable. I charge up mine with a hobby charger.

[@UmarRCz]

Alright thats cool, i was just about to put in recycle bin🙈coz couldnt find anything saying it was a rechargeable! its written on chinese.. i just got the 18650 charger ordered from ebay, that'll do the job

[@HeroLEE-kh9ol]

The transmitter has a button which can control the FPV camera on and off. No need to modified it

[@UmarRCz]

Your fpv camera seems to stay on, mines only stay on for 2-3 min and then turns off!!? After few minutes its cooled it comes back on again just for 2-3 minutes!!? The battery in the car is fully charged so dont know why that happens? Something wrong with the fpv, What do you think? thanks

[@RCEscape]

Nope, I don't have that issue. Now, on this test I did have mine soldered on to one of those empty 5 volt pads because I thought the original pads didn't work. I have now re soldered them to the original pads and the vtx still stays on till I turn it off.

[@UmarRCz]

right so it means only my copy of fpv is faulty then, i sent a complain to diatone saying they need to fix this problem, probably it occurs in some other fpvs too.. Diatone sent me a copy to make a video but instead i sent a feedback video to them 😊 stating all the problems like the ground clearence on the front is too low it actually scrapes on a slightly uneven surface, the body near the front wheels also need cutting out a little as it slightly touches when turning, also your left side indicator is quite dim just like mines; i mentioned that too, and some other secondary suggestions as well like if they can make the tail lights to turn On continuously with the main headlights & improving the underlight to make it glow all around etc; hope they can start improving the Q25 asap. And btw i was going to start messing around with the board as you did when the fpv didnt turn on lol, then after some random button pressing i realised that the fpv turns On from the controller which is a really good option; (just unfortunate that the fpv cam doesnt stay On for long on mines)

[@RCEscape]

@@UmarRCz If your vtx keeps doing that Diatone should send you another one. The wheels touching the body when turning can be fixed by heating up the body with a hair dryer and widening it till it cools down. That helped mine.

[@UmarRCz]

Yep ill ask them and see if they can send me another fpv cam (i thought this problem was with all the Q25s so i just advised them to fix this issue on other Q25s rather than asking for replacement) Regarding the widening the body with hair dryer? (didnt understand hows that) but i mean basically with a craft knife you can cut and shave some layer off to make it wider, Also i think for the front side scraping on the ground issue; if the suspension springs are changed to a more stiffer ones (diatone will have to make them) then the chasis can stay more upright and so underneath front side can have more clearence, the stock springs on the front are too soft and presses the front side of the chasis too close to the ground.

[@RCEscape]

@@UmarRCz When you heat the car body with a hair dryer, it gets a little soft so you can pull the middle part apart and widen the area that the tire scrapes.

[@mafiafpv3469]

To be honest the music killed this video horrible… great rc car👍

[@RCEscape]

Lol!! And it took me forever to find music. 🤣

[@mafiafpv3469]

@@RCEscape 🤣sorry bro it was horrible sounded like the music back in 1983 when they brought the tv into the class room🤣🤣🤣🤣

[@RCEscape]

@@mafiafpv3469 I usually find decent music pretty fast but this time it was late in the night and I said the heck this will do! 😁

[@mafiafpv3469]

@@RCEscape I still love ya buddy ❤️🙏❤️🙏

[@RCEscape]

@@mafiafpv3469 🍺🍺

[@rubinhodrone9204]

É chow amigo Bom dia

[@7MPhonemicEnglish]

It's too small. I'd rather have a larger car with a camera inside.

[@RCEscape]

It's too small for me too but I can fpv on the desk top with this thing :)