Fixing & Using the Cheapest Power Rake I could buy!! (ASMR?)

[@braxtonnelson7422]

I have discovered that while I enjoy your content, I stay for your personality and can-do attitude! Your dry sense of humor, your ability to explain what you are doing and why, and even your admission of "this is the first time I've ever tried this"... and yet you put it out here so that we can see how well you do! Keep up the good work!

[@nated3019]

T

[@Adam_Lynn]

This +1

[@DieselCreek]

Thank you!!!

[@medienkonsument4]

Jep definitly. I came in for the recoveries at first, but that gets boring after a couple of videos. But I noticed this guy does really nice videos and I also like your attitude a lot.

[@stefanbuscaylet]

Ditto this!

[@ceraldi]

put the boom in float and use the curl to adjust the depth of cut, you want it to ride on the front castor wheels. run the drum rotation against the direction of travel, that way you get a big mass of material moving with you that will fill in and level all the low spots.

[@markuschampos5750]

Yes, it's a little bit like plowing I imaging👍

[@dodgeme1986truck]

If you don't have boom float you may have bucket float it works almost as well

[@windzer]

im glad you explained this saved me the time of typing it but you are exactly right

[@yorkshirepud3030]

That's good advice

[@glennfryer1539]

Well said.. on the button… easy to bend the shafts on the front Jockey wheels..

[@TheMagicSaltine]

I just want to say, you have some of the best intros on all of KZbin

[@DieselCreek]

That’s one heck of a complement! Thanks!!

[@GaHullbillyRanch]

@@DieselCreek Andrew camarata has a video of him renting one of these attachment for a job.

[@ClinttheGreat]

@@GaHullbillyRanch In Andrew’s video that I saw, he was using a landscape rake, not a rock rake. The difference being that a landscape rake has an area where you can collect rocks (or whatever debris) and go dump it somewhere else. Whereas a rock rake, like is used in this video, does not have an option to collect anything. Also, rock rakes pivot, but landscape rakes don’t. Similar idea to how some skid steer brooms allow you to collect debris and other brooms only allow you to move/push debris.

[@walkersamdahl3424]

@@ClinttheGreat yeah we call those things rock hounds here where I live. Not sure if it’s a brand name or not

[@willcullen8415]

If you're ever after welding any component on a cylinder, try hanging the rest of the cylinder in a bucket of water to keep the heat away from any seals or distorting areas on the cylinder. Not always necessary, but could save a fella some extra work in some instances

[@austinpalmlund5054]

Never thought about that, great idea

[@leonvdm]

Also, extend the rod end so the heat is not as close to the inner seals. Dont forget to cover the rod chome

[@KlausAlleinzuhaus1]

and dont shut the pipe conectors. so if anything heats up and expands it can evaporate and not explode into your face.

[@TheSwitzertrainer]

I discovered and subscribed to this channel this week. I enjoyed what you are doing and you reminded me of my late step-father (compliments). He was a heavy equipment mechanic who came up with ideas like you. He was assigned to put back a locomotive at the naval base with no experience but using an O & M Manual. We are talking parts all over the yard. He and another mechanic did the job. The Naval Base received a new generator and it wouldn't put out. After getting the Factory Rep out and he couldn't fix it, they asked my step-father to take a look at it. He pulled out the O & M manual, made some adjustments and it worked. They asked him what is it he did. He said "read the manual". They wound up getting the base commander involved before he would tell them. That's his sense of humor. He is also like you, if he can avoid buying something new, he would make it. This only with a fourth grade education (in the thirties). He would have made a great engineer with "sense"

[@devinsullivan6160]

Make sure you clean your gear off when you load out; You don't want even a little bit of that Knotweed coming home with you. From what I understand it will root and grow from even little cuttings, and it can grow right through concrete pads and masonry walls.

[@DieselCreek]

I did but I actually already have it growing on the creek banks at the farm

[@thJune]

@@DieselCreek welp. Looks like there’s a “kill it all with fire” video in the future lol

[@jmkudlak]

@@DieselCreek p

[@FransvandenBergeMuziekschuur]

@@DieselCreek if you use used oil on its roots with a brush it will die.

[@timk.1395]

@@thJune That's a really good idea!

[@darrellbarr3019]

After about 30 years in the construction industry I would have to say that the one accessory that has impressed me the most is the power rake. Nothing I’ve ever used will turn a lumpy site into a smooth finish faster than the power rake. You will never regret that purchase!

[@kenmakowski9422]

Dan nice job

[@glennridge1436]

The early pioneers used a large length of timber with wooden knob spikes and real horse power lol , to smooth out a farm or road area.

[@allseasonslandclearing1367]

I have a rake from abi attachment called an sr3 and love it.

[@harpo6203]

If you've ever used the Bobcat Rock-Hounder, it's amazing too!

[@jimw6991]

I rented a power rake and dragged in behind my small Kubota. There was a blade behind the drum that in conjunction with the castor wheels and height adjustment from 3 pt high attachment arms that allowed leveling function to work, I haven't run this attachedvto the front of a skid steer but looked like Matt's unit was not able to grade at all because of the wheels behind bent and crooked blade? He used this to "roto till" thevgravel and switched attachments to grade back blading with the bucket. It came out okay but if the rake worked as intended I don't think he would have needed all that bucket grading. What do the guys running this think ?

[@idv1328]

Yes! Great start to a Saturday

[@oomwat6101]

The young stems of japanese knotweed are edible and have a kind of rhubarb like flavour. It's a real bugger to kill off though, it'll regrow from even a small piece of root, or a full section of stem ... best thing is to dig it out and burn it!

[@ProfessionalArmourer]

Matt I just watched this on the Roku (52 inch TV is a hell of alot better than a 12 inch laptop) YOU need to get a Palm Sander and an assortment of waterproof sandpaper, 80 grit to 800 and a handful of flapper wheels. this would have taken care of the hydraulic piston pin that siezed up on you (Ive used mine with 400,600 and 800 wet to restore fogged car headlights to clear in less time than the restoration kits take). this would also restore the handles on the crane controls on the crane truck, after polishing them down, fill the markings with high end (holds up to swimming pool water) Finger nail polish. White is the typical color. then throw some clearkote over the handles. Dont saturate it, light coats, let it dry and do it again. and repeat... until you are satisfied. And keep up the good work. I just wish you were in Wisconsin!

[@FQP-7024]

You Matt are the interpretation of the saying "I don't know what I'm doing but I'm sure as hell going to try my best"

[@DieselCreek]

Fake it till ya make it!

[@FQP-7024]

@@DieselCreek nah you made it for sure, the determination and the sheer willpower is th difference that makes a idea become reality, and you sir have masters it, piece by piece you are simply adding to your skills and I can only respect that as much as I am or else I'd join ya lol

[@williamstrausner9063]

Give Dirt Perfect Mike Simon's a shout since he is a pro at the use of a power take.

[@darinhassett4708]

@@DieselCreek i thought it was break it lol

[@Velvethamma]

Once you get the casters straight and adjusted you will have an easier time. I have owned and run a Harley M6 rake for almost 20 years. The way I use it I curl down until casters touch and then lower boom/ curl back until drum cuts the way I want. Then if you need to feather material I raise boom while traveling to taper off. I learned to listen for material hitting drum while raising at the end or beginning of pass. This helped me to get the feel for feathering it out. The flap above drum does exactly what you say it does. One thing I noticed is your tool didn’t have the end wings on it for carrying material. They may help and you can put them on the push or pull side of unit. Those rakes seem to cut hardest on the pull direction. Hell of a deal for what you paid

[@Velvethamma]

@JohnnathanAB I’m no expert but I’ve got a lot of seat time learning what doesn’t work, lol

[@rickbaker4571]

I've always sprayed the area first - combination of white vinegar, any salt and a splash of dawn... cheapest weed/grass kill and it works. Then when you "groom" it doesn't grow back.

[@avlawns3037]

If he is in ny, any application commercially(and even free work counts as commercial) needs licensing. Even spraying salt water.

[@rickbaker4571]

@@avlawns3037 He's in Western PA...

[@avlawns3037]

@@rickbaker4571 wasn't being facisous, just epa fines suck. And start at 5k.

[@rickbaker4571]

@@avlawns3037 Then move. We came here to see Matt. Nobody, and I do mean nobody, gives 2 schits about you, where you live or what you do. Fugoff jagoff.

[@markhall3434]

Nice Video.. Two Questions I don't think you answered.. Gotta Tiller newbie. 1. Float the Bucket? 2. Differences between Push or Pull the pile?

[@briancasey4917]

A guy that did my yard after a building I put up. Had one of those rakes with a feature that worked like a golf ball collector that collected bigger rocks and then can be dumped elsewhere.

[@ronnygraves6380]

Thank you for thinking of us, Matt, and sharing a video of this project!

[@mblind]

If you can, bring us back after a couple of good soaking rains so we can see how that helps (or at least, affected) the gravel after the power rake

[@Hanky_Bannist8r]

Sometimes you just gotta go out there and make mistakes, learn and perfect. Thanks for sharing the power rake with us it's super cool and useful.

[@DieselCreek]

Thanks for watching and commenting 👍🏼👍🏼

[@BearMeat4Dinner]

Hank so true man so true!!

[@brucebonkowski4526]

Spray it with dawn soap and vinegar

[@ryanshadders750]

Matt I just want to say that I give you a lot of respect for showing everyone your thought process, you're learning process and even your mistakes. There's so much that can be learned from the entire experience that most people just edit out. I love your content please keep it coming

[@PaulMeyer-v8t]

Howdyyawl from the land down under. Well Matt, I've never had or used power rake, but what I viewed was pretty good.I reckon you did a fantastic job not knowing how to use it properly. Keep on trucking.😊

[@ramosel]

When I rented a Harley rake for my gravel paths (4 years ago?) I watched the Dirt Ninja's "how to" video. It was hard not to back drag the rake, but he said to only use it going forward. In the end I think I finally understood the machine. So the last two hundred yards looked great!!

[@russabrams3982]

Watched you weld the first bolt on the cylinder pin , and saw you grounded the welding lead to the bolt . That was smart , so the weld was concentrated on the end of the pin . The other pin for the pivot was not grounded that way , and my thought is it had to ground through the pivot pin . That probably did a good job of welding the pivot pin to the bore , and made it almost impossible to remove . We used to weld stuff on crankshafts, and the ground path was through the crank counter weight . If grounded through the block it would weld the bearing to the crank . Great Channel, love the content .

[@Gpbattersby]

Interesting 👍

[@lucindas2931]

Fascinating!

[@daddymarkram]

Half the things you do I really have no clue about. I'm just fascinated to see you being able to fix pretty much anything. An added bonus is you using all the cool machines you got. I can't say whether or not you're doing it correctly, but I can say you're entertaining and inspiring - so keep up the good work. 😃

[@cbadnc9040]

The world needs more people like you!!!

[@idadho]

Use a leaf blower to blow the water and mud out of the wet potholes before you try to fill them. The water and slippery mud will prevent the fill from compacting properly. The mud will cause the fill to slip right out. I lived on a county maintained gravel road. The county always dug out the pot holes before filling them with chipped rock mix.

[@noname-nd8ec]

Not too long ago, local business' would donate time and $$ to get these community projects done. Now corporations don't, because they spend their $$ and time on advertising telling everyone how good spirited and community minded they are. Well done Matt, your community needs you.

[@Digital-Dan]

Not to mention PSA's advocating having a family evacuation plan, made by the utility company that caused the last few evacuations (gas explosions and electrical fires.)

[@Grayson203]

I've found that a float function really helps keep it from gouging too deep. But best advice from me is just experimenting and a good steady hand for when the terrain changes. Keep up the good work!

[@Biffo1262]

The reason gravel thrown into a compacted and water filled depression gets blown out is due to hydrostatic pressure. Water still underlies it and vehicles travelling over it transfers pressure to the water. As water is virtually incompressible it squirts out taking the loose gravel with it. Loosening and grading the whole surface prevents water pooling so it can drain effectively.

[@ballzout9447]

thanks professor

[@PaulMeyer-v8t]

Howdyyawl from the land down under. Maintenance. Always has to be done. It makes it harder when you get a machine from someone who doesn't do much or any. You fix it up & keep it neat & Itll go for years. Keep up the good work.😊

[@rodneygreen3388]

Keep the tires on the ground. Set your depth. The put your arms on the machine in float. If your grading push material in front. When your just tilling run the drum the saneme direction as you are traveling. That attachment is designed to take the larger rock out when your finish grading a yard.

[@ADSC2006]

Ah another quality Kroil Creek repair.

[@gwpsr58]

He gets $0.68 for every mention!

[@DieselCreek]

@@gwpsr58 your estimation is a little high lol

[@cjmarcel2971]

@@DieselCreek lol

[@brucebonkowski4526]

Put some grease or anti seizure on all bolts

[@ballzout9447]

That's funny, but seriously I use that stuff daily.

[@ChakatNightspark]

Thinking a Couple good loads of Gravel would be a good idea too. Spread it over the low spots in the middle where pot holes were, and perhaps bit up front. but that could wait until end of project.

[@danslawncare8594]

Hey Matt you need to let the front wheels hit the ground by tipping your bucket down and don't try to take it all in one pass. Dirt boss has some good videos on how run one and dirt perfect. They are both very good . Thank for the video.

[@tadpolefarms631]

Agree on allowing the idler wheels to cary the load and maintain levelness - but then you have this figured out by now. One important thing: KEEP THE DRUM BEARINGS GREASED - FREQUENTLY.

[@seanworkman431]

Did you not watch the video? The idler shafts are bent and cannot be adjusted, another future fix.

[@williammcintosh712]

Yea, a lighter touch prevents pushing too much material to the sides and front of the rake. Though you probably worked that out within a time or two of working with it.

[@lotharschiese8559]

The rack drum rotation is reversible, the training wheels in front need to be fixed, they act as guides, watch this! From 5:50 onwards! kzbin.info/www/bejne/jZWkaIONib-Vi5I

[@lotharschiese8559]

All 3 pins need grease, machine a grease channel, leave a nut welded to the top of each pin, so can rotate every so often to spread the grease. I would drill and tap for a grease fitting on the frame.

[@samitch24d20]

Just watched SOT making new sign looks great

[@margaretwilkinson9140]

Matt your honesty and humble nature makes you a favorite on the innertube!!!

[@paulprigge1209]

This disabled 60 year old disabled dude has learned so much from you. My chief babysitter is A pretty good wrench. I can understand more what he’s doing. He was my renters brother.

[@karen7366]

Sure you aren’t the 60 year old disabled dude?

[@Microphone73]

A very useful tool for finishing. Great to add to your tool kit. Love the upgrades!

[@128file]

Loved the line, “ Grinder and paint makes me the welder I ain’t.” That’s me I struggle with my wire feed learned on a stick years ago.

[@HJZ75driver]

Good old Uncle Bumblefvck. Or as his friends call him, AvE

[@Hoaxer51]

Lee Renraw, that’s an old Red Green saying, he’s an old Canadian that has a ton of those sayings. He used to sign off his tv show saying “Keep Your Stick on the Ice”. Another great say of his was “If the Women Don’t Find You Handsome, At Least They’ll Find You Handy” ! Lol

[@roberthodge2771]

A farm Stone Rake works a lot like that; collects rocks by the ton to haul off of the area and dump them. Can be fairly cheap---$1500 / #2500. Will remove rocks larger than About 1-1/2"

[@MichaelWayneLane]

U can also use that piece of hardware to manufacture a rustic road way, your hard granite would be 1/4 inch minus and industrial strength Elmer's glue, use your power rake to mix the components together, roll it let dry and harden and apply 100% solution of glue to create a hard shell

[@assassinlexx1993]

The rake did a great job of bring the lot back to full capacity . What I notice was how well the skid steer is working. That purchase will turn out to be one of your best deals. It won't be too long before you be using the heater.

[@DocNo27]

Dirt Perfect has been demoing a Rukus Rake for a while (maybe he bought it finally?) but he just uses it at the very end to even out and put the finishing touch on his jobs. He powers around in that thing so fast it really doesn't get to do anything - then again he doesn't need it to do much. It was cool seeing you really put it work and really tear in. I'd say you got a worth the money deal - looks like an incredibly useful and fun tool!

[@warrenmichael918]

DP is using it to finish dirt projects, that doesnt take much with this machine. When using a power rake on tough and deeper soil and rocks like Matt is doing here, he is using it like i see others use it.

[@jeffscott811]

Dp demoed it and bought the ruckus rake

[@wooljunkie29]

JKW is a nightmare stuff can grow through anything, if found around here{Hull, England), all the soil has to be treated. a local building company was demolishing a few streets to make way for a new estate and one of the truck brought in JKW, very expensive problem.they had to treat the whole area and was heavily monitored by the environment agency for a whole year. oh and also a huge fine . another great vid as per Matt

[@ericevans4040]

in addition Mat clean every tiny speck of soil and root off your equipment that is all it takes to start a new infection.

[@tacticalrabbit308]

What did they use to kill those weeds?

[@ericevans4040]

specialist companies, are brought in by the environmental agency, here in the uk

[@2xKTfc]

Does Roundup work against JKW or does it need something particular?

[@TheSkinman11]

Small world also from Hull.

[@olgascott1098]

Hi Love your show..Japanese Knotweed is considered a noxious weed and is extremely dangerous as it spreads from small pieces of weed or root. Make sure you dont take any to your home or farm, Impossible to get rid of. In the UK a home cannot be sold if there is any in the garden. It has to be declared to the authorities. It is the plant version of Covid

[@Paladun100]

your wing it attitude earned a sub from me love it

[@Far2hip]

The power rake is a fantastic piece of equipment to have in the line up. They are perfect for freshening up a gravel drive and allow the smaller grains to drop lower and pack in again. A quick power rake job on a gravel drive and a medium speed vibratory roller treatment is a great way to get it flat again and get rid of puddles. 👍🏻😎👍🏻

[@donparker8246]

When you decided to leave the pin in there,I could hear Derek from Vice Grip Garage saying,"I'm gonna do the right thing and just pretend I didn't see that." You did a great job with that rake.

[@gwpsr58]

When the Enerpac came out, I'm thinking "There's gonna be a bang". Watched the next minute with one eye closed. Was not disappointed. (Like when Squatch does final drives)

[@Hyratel]

Crrrk crrrk...... PTANG!!

[@HouseGurke]

Winter's coming - and so is 5J1113 season. Can't wait for new D2 episodes.

[@markbehr88]

Great job Matt

[@alanjacobson6673]

And my grandfather had a tool similar to that, except he had a small hook on the end of it, so we can pull caterpins out kenzo.Nice to see things don't change

[@danhill6298]

You know Matt, I’ve watched other videos of people doing what you do. But know one is able to do what you do. You bring an adventure/entertainment factor into your videos. I really enjoy watching you! Keep up the good work 👍

[@jeffersonelliot8909]

Being able to acquire the funds to purchase a heavy duty machine just got way easy, with the right steps followed, I bet you in less than 2 months.

[@victorialopez1021]

The new way is farming digitally

[@jeffersonelliot8909]

@@victorialopez1021 That's very true!

[@robertgarcia338]

I would like to start farming digitally, how can I go about it?

[@davisrobertson7159]

been farming digitally for a long time now, and I can not dispute it's profitability

[@eegram....franklinharper5491]

Instead of harvesting, it is called claiming. Your digitally harvested products are sold digitally and all you do is claim the rewards, technology has changed mankind forever

[@willcolonjr9738]

Hey brother, love your content. Two things, you should have extended the cylinder rod away from the weld area so your piston seals don't het damage with the heat, also leave the fittings open so it don't build internal pressure that could cause pin holes on your weld. Just an observation.

[@bettingru]

Good job learning your new machine while being a caring citizen in your community.

[@index5437]

With your mig welding, clean all the paint etc off down to bare metal before welding, it'll reduce your spatter and weld is happier to stick and really burn in with the material being clean. Can even hit it with some acetone or something if you really want a nice finish on the weld.

[@wjamesm1001]

You did good at 3K for the rake , I also have been watching auctions for at least 2 years now and haven't seen one go for under 5K . As far as operations goes , now this is what I observed watching KZbin vids is that when guys use them they have down pressure on the front bogies and you can see they actually have the front idlers just off the ground and use the bucket tilt on the loader to adjust depth of cut , Kind of of like using a grader blade . You look like your using the loader arm lit to adjust depth of cut , I know those bogies don't look like they can carry the weight but they do . You should have brought some road cones with you , I use them to mark areas like where the drains are so I can see them from the machine . To bad the bank isn't less of a slope so they can maintain it , probable will grow back to where it was before you started . It would be nice if those rakes had a tilt function so you could crown a road or cut a swale from around those drains

[@robertwheeler8476]

I totally agree... Great work tho Matt

[@No_soup_for_you]

I would have thought you put the arms in float and have the rake resting/rolling on the dolly wheels and use the tilt to adjust the depth of cut. That way it’ll only cut the top and you can make a second pass to go a bit deeper if you like. Am I wrong thinking this?

[@chrispy3866]

Exactly what william said. Well put.

[@joshuahenry1791]

When i comes to trying something new for the first time. An idiot today, is a wise man tomorrow. It will only get better as time goes on. Thanks for sharing Matt.

[@johnneild3914]

What a Saturday diesel creek and coldwar motors later on cheers and cold beers from the UK matt

[@Carl09of09]

Agreed, waiting for the next COLDWARMOTORS video today! ✌🏻

[@rsprockets7846]

An sun mustie1. Nirvana

[@jbkbrand]

I noticed the pot holes are exactly where the recycling and trash trucks turn to line up on the dumpster. I deal with it all the time. The trucks are heavy and they take the shortest route possible. On a gravel lot it’s a ongoing issue. They are placed for convenience of the user. What I try to do when I can is place the container where the driver doesn’t need to cut quite so hard coming and going. This doesn’t solve the issue on a gravel lot but it does seem to slow down the problem. Love the video.

[@kameljoe21]

The caster wheels are suppose to have rings on them. There are 1 inch 1/2 and 1/4 rings or washers that are that thick. You take the caster off and place the size you want on bottom and the extras on top. I had to do this a bunch when changing heights on large bat wing mowers.

[@andrewwolf4430]

You didn’t disappoint. As soon as I saw the broken cylinder I was screaming weld it up!

[@charleskloentrup9153]

For some one that has never ran one of those power raked before I would say you did one heck of a job on that parking lot .👍

[@t1259sw]

My Saturday morning DC, no better way to start my day. Thanks Matt.

[@ernestg.hilliker4179]

That power rake is somethingIi need to get to help neighbors with there driveways!

[@Mtlmshr]

You may say that your not a great mig welder however I’ve learned over the 40 years that I’ve been welding that every weld has its own joint preparation and I do believe, had you ground the cap and the tube a bit to make a bit more open joint your weld would have been a great weld! Either way if it holds and does not leak then you were successful!!!

[@helfrie]

Hey Matt, one thing I always want to know but is extremely tough to tell from watching the videos is how much time this took you in terms of work. It looked like several different days but a rollup of how many hours even if not exact would be very useful. Great content as usual.

[@michaelphillippie8789]

51:07

[@hyperthermogenic]

"I've only seen short videos of people using this..." Hey, if ya' learnt it on youtube you're all good.

[@cody9613]

Prob because it breaks in the first two secs

[@nickguest9071]

KZbin has made getting advice from your Dad redundant

[@custos3249]

Always funny when people gripe about that as if "training videos" weren't already used by industry

[@Peter-td3yk]

Not always...lots of idiots... he is not 1

[@TerryC69]

That lot is VASTLY improved. I will be interested in seeing the finial product after you are finished using the excavator on it.

[@JFirn86Q]

That pin did come up a decent amount when you were using the slide hammer, but I think it came out of the bottom half joint. Love how you show your fails and trials, helps people learn a ton! Thank you

[@brucecapron9344]

I am 64 and active.in construction everyday. I have done about 80% of everything and some pretty well. There are 2 classes of individuals who tell me what they want. I can not meet their levels of practical knowledge experience and super strong visceral tie to the earth. Farmers and operators. Now I have had some large 1/2 acre farms and run 40k excavators on the side of a mountain and run a wiggle stick backhoe. I'm little league to these guys. Hey know my respect for them. That's why they call me when they need a building up. That's in my bloof.

[@chance6298]

I was thinking last night, when is Diesel Creek putting out another video?? My name is Mark, and I'm addicted to DC! 😆 🤣 😂 😹

[@Mad.Man.Marine]

Just a tip. It sounds like you need just a touch more amperage on the mig. Or a little less wire speed. It will come out much better. Good fix man.

[@georgelashomb5575]

I myself would go deep to loosen up the stone then lower the wheels for the final finish.

[@MO_Lip_Ripper]

Never used one that big or with a skid steer but put in plenty of hours with one on a Toro Dingo doing residential lawn grading for sod. Super handy tool to have. I'd love to use one of this size!

[@timmydrake9125]

Wow. I have backhoe and drag harrow Drag around. Take front end loader. Scoop up debris. Haul in whatever and spread it. Now I can save land owner a lot. Work with what’s there. Thank you

[@grosseileracingteam]

Nice job Matt. I'm sure the KofC really appreciate you helping them out. Hopefully they'll lead you to some good jobs. Thanks for posting.

[@blake8297]

Shew, I was worried something was going to hit me when you went over 5,000psi.

[@ronfrance4041]

It’s almost like getting to 88mph with the flux capacitor engaged.

[@SoleEpiphany]

I ducked😳😏

[@OldF1000]

It had me puckering ;)

[@HJZ75driver]

I flinched when it went bang

[@gerrythompson1721]

Got a living room full of washers

[@jontrudell7529]

Wow that thing does a pretty good job

[@stripeypaw]

Full of admiration for the skills you have. Fix it not buy new. Nobody is laughing , if it is doing what you need it to do then you are doing it right. Thanks for the videos you are inspiring.

[@oriwittmer]

She's a beauty. You want the rocks/soil looking like a rolling boil otherwise you're tracking too fast or slow, similar to harrowing etc. Also like when grading with an excavator backblade, you want to be overlapping 1/2 to 3/4 of the previous smoothed area so as to prevent the machine pitching up and down affecting the finished level. Or boom/bucket float. I think it came up well though!

[@natecampbell4708]

Awesome job there, Matt! Thanks for showing even your goof-ups; I have to admit, I re-played that minute where the bolt & washers went flying a couple of times LOL! :-D The results with the rake are very impressive! The way you could effectively erase a pothole was eye opening. I think you did a great job regardless of inexperience. Looking forward to phase 3!

[@Crazick]

I'm no expert but that looks pretty damn good.

[@jeffboutwell2421]

Matt: your volunteering of your operator and machine time plus costs is a true tribute to your community involvement for a non-profit organization. I hope the next community event invites you for a free BBQ steak dinner.

[@lotharschiese8559]

And he found the perfect playground to play with his new tool!

[@johnsmith-xr6qy]

oil the pull handle to save man handle. Enjoyed watching someone else do the work for a change. I'm not too old to care just too old to want'a do it. I enjoy the video & audio of how to & not too do.

[@terexooo]

It took me about 100 hours to learn operate a Harley rake doing prep for lawn. Always have your fronttire on the ground.

[@baitse7676]

THis attachment would be good at removing rust and paint as well

[@jeremiahsullivan5219]

As a 3rd degree knight for the last 30 years I hope the council appreciate all your work and your money is no good in the lounge for awhile

[@MattyEngland]

Is the lounge where you eat the babies? 🤔

[@keithbroh5730]

Is there some kind of point to being in besides meeting people and making connections

[@SteveDiamond19]

@@MattyEngland lol, masons everywhere

[@awkwarddude]

A job well done, Matt! You make it look "easy", the parking lot looks great. That power rake is a good investment for sure. 👍👍👏👏

[@andrewphillips9798]

Japanese knot weed!! Here in the UK that would have to be registered and all equipment cleaned down properly before leaving site to prevent any transfer of seeds etc. That stuff is a real problem for house foundation damage etc, thats why we try real hard to have it professionally removed if ever it is found growing anywhere as you just can't spray it off. Nice video by the way :)

[@donaldatkinson105]

Slashing the surrounding vegetation and restoration of the car park was a very tidy job, with a great outcome. Very enjoyable shows

[@TheFalcro1234]

Hello Matt I am really enjoying your content. I learn from what you do and benefit from your personality. You seem to just stay level regardless of how things go, good or poorly. keep it coming and I will keep watching

[@ryanpaul5604]

"if a six year old in a Taiwanese factory welded this in the first place, I bet I can do it in the garage" 😂😂😂

[@laoluu]

Six year old Taiwanese kids don't weld. Period.

[@runsolo7418]

@@laoluu I bet Chinese kids do.

[@cybercommando3503]

Unlike China, Taiwan doesn't believe that their people are inherently worthless beyond serving as robots for the government.

[@erik_dk842]

@@cybercommando3503 Do you think that Brandon will stand up for them, if China moves in?

[@codiebranch5501]

I was going to ask if anyone else caught that

[@TWLML420]

That was a stubborn pin, the hollow porta-power cylinder was pretty cool.

[@AllisChalmersMN]

Nature is such an incredible thing. It’s amazing to see how things can be transferred from a once nice parking lot into nature taking it back.

[@wirenut003]

The Parking lot has a new look . like that power rake I think a little getting used to and you,ll be a pro at that. The Knights must be very grateful to you for providing the tools and man power to help them maintain the property. I myself aim a 3rd degree Knight and i thank you also.

[@kingfloopy]

I was wondering when you started hammering that first pin out where the Kroil was and then it showed up. :)

[@johnhhinton5473]

A good soak of the stubborn one over a day or two might have yielded results.

[@darkvalebrewer93]

Great video Matt 👍 I really enjoy watching your endeavours, repairs and getting stuff running again 🤜🤛

[@Green-Mountainboy]

In hindsight heating up around that stuck pin probably would have been a good idea.

[@christophermarshall5765]

He needs to get the remains of the sheared bolt out first. Once this is done, he'll be able to remove the pin. There is a really nice 20t 3 claw industrial grade hydraulic puller he can use to press the pin out. This works on the same principle as a hydraulic bottle jack.

[@LLImprovement]

I have a similar implement to this, just a little bit bigger. Mine is a rock rake for windrowing rocks in fields. Also you were right about pot holes getting pounded out if you just add material in them. Im a grader operator at work and you need to cut the holes/washboards out of the roadway to fix them or they just come right back.

[@MikeHarveyPhoto]

An idea for the bent shaft problems dont cross drill the shaft just use say 1" collars top and bottom to make height you need with a captive bolt on top to keep it all together and way easier to make