Mod the latest DJI firmware with Super Patcher 2.0

[@pierruno]

Can you make a new video with V2.0.2

[@dinucacid]

Thanks for the great video, worked perfectly first time !

[@PlatovPavel]

dinucacid Only first time?)))

[@StephenG007]

Can you upgrade it to the new firmware after the Patcher?

[@blondblue1949]

This worked for me Jan 2021. A wonderful piece of programming. Installed perfectly. I sent him $35, and would encourage others to do the same (or more.) Good guys like Brett are defeating the fuckers at DJI and I am happy he is!

[@1ecafuentes]

Do you have to download an earlier version of dji assistant? It didn’t work for me after following steps on Mavic pro

[@blondblue1949]

@@1ecafuentes I didnt DL any assistant ever. (Possibly DJI assistant is screwing your patch up.) I just downloaded the "super patcher 2.0.2" and followed the instructions. I did need to run the part that rolled back my Mavic firmware to an earlier version. But that version is IN the super patcher package and when prompted and I said yes and everything move forward to successful completion. As stated in the Patcher you MUST follow the directions carefully and close certain utilities when prompted. Like any software install it is a bit tricky, but this patch ran very easy for me. Find out what version of firmware is on your Mavic and that may help determine a successful "patch." Your Mavic MUST be running STOCK V01.04.0300 fw for all modules. BTW. if you ever install a DJI update after the patch you will fucked AGAIN by DJI.

[@premkamandir]

@@blondblue1949 how about v1 01.04.0500 (mavic pro 1) does it work too?

[@nis018]

@blond blue my Mavic Pro is on V01.04.0500. Does DJI_Super-PatcherV2.0.2 downgrade it to V01.04.0300?

[@nis018]

I can answer my own question. YES, I was able to downgrade the firmware on my Mavic Pro from V01.04.0500 to V01.04.0300. In ordedr to do this, you need to run DJI_Super-PatcherV2.0.2 and select option 2. Follow the prompt and on DUMLdoreV3 select "Download Firmware" (you might need to run DUMLdoreV3 independent from DJI_Super-PatcherV2.0.2 if "Download Firmware" is grayed out ). It will open github (github.com/cs2000/DankDroneDownloader) - download DankDroneDownloader and run it. In DankDroneDownloader select Mavic Pro and select V01.04.0300 firmware. It will download the firmware. Close DankDroneDownloader. Go back to DUMLdoreV3 and select "Load Firmware". Select the firmware you just downloaded and click "Flash Firmware". Be patient, it will take about 10 minutes. Mine got stuck on around 64% and the drone restarted couple of times. It opened another DUMLdoreV3 instance where it showed the firmware was downgraded to V01.04.0300. Close that 2nd DUMLdoreV3 instance and the first should finish shortly after. When done, close DUMLdoreV3 and reboot your drone. Continue on DJI_Super-PatcherV2.0.2. It asked me if I want to Flash the firmware one more time and I selected YES. Repeated the whole process but much faster this time. I rebooted the drone one more time and continued with DJI_Super-PatcherV2.0.2. At this point, go back to the main menu and select the option 1. Follow the prompt and flash MavicPro_SP_2.0_Stealth_03.02.44.21_dji_system.bin firmware. Verifiy the firmware in DJI GO 4 app.

[@acorchia]

Awesome video digdat0! as always :) the safety warning is a real nice touch, keep those up!

[@ghafoorhussain6677]

Cheers mate. Great information as per usual.

[@ericcamilleri7698]

Is there anything similar for Mavic Mini ?

[@HighFidelityFox]

Thanks , worked perfectly on mavic pro v1

[@HummingbirdUAV]

Any idea if this is going to be implemented for the Mavic Air?

[@infinitenothingness]

I have the same question.

[@sanchezmalber]

Please ... mavic air

[@rologti]

Downloaded, unzipped it, started the cmd, it opened, and then, it got closed, can't continue.... what Im doing wrong, I have just follow the same procedure here

[@alessandrozappa2205]

same here

[@TheDiegoele]

same here, any help?

[@sergiotariccomackay269]

You are a blast digdata. Greetings from Chile!

[@jbw3]

How about something for the mavic 2 pro??

[@shotbyarian]

push!

[@ravkhangurra7522]

Also looking for mod on m2p

[@yvanc3842]

Yes that would be nice,

[@TDWRCRacing]

nolimitdronez.com/ works perfect on my Mavic 2 Pro

[@ChrisDowhie]

@@TDWRCRacing not if you upgraded to 1.00.0400

[@peterc3152]

Can someone comment on the battery warning adjustment within Assistant? After patch with battery mod I am not able to adjust battery warning levels. Assistant shows 0% for DJI Smart battery selection and I do not see anyway to adjust the 2 percentage levels. Also, when I make a selection on what action to take when the battery reaches low or critical it does not seem to save the selections. Maybe I am misunderstanding the battery mod but I thought it would allow us to modify DJI Smart battery settings in Assistant? Any help would be appreciated. Thanks

[@pegcity4eva]

Just reinstall the mod without the battery setting and enable it in dji assistant instead maybe

[@amitinderdeepak]

I went through the process again, and all was working as supposed to. Here the issue. The patcher went through a few steps as it should, ADb etc but when it came to the step of asking me to flash the modified firmware to the craft, i cant find the firmware file in the location folder. I mean the Folder "SP_Flight_Controllers" is there but nothing in side it. I also have a folder Stock_Firmware with the stock file in it. But no modified one. I ran the process twice on the Mavic Pro and both times i couldnt find the modified firmware. Kindly advise as to whats happening here. Awaiting your reply. Cheers

[@kevy7859]

same problem here

[@sikleongng7071]

How are you mavic pro2 super-patcher new version about mavic pro2 boost thanks

[@EnuffsEnuff318]

I miss the other jazz loop you had playing in the background before. It would stick in my head for hours :)

[@matinagiannouli7135]

I wish i had mavic1, unfortunately i have mavic2 zoom.. Is there any modifications for mavic 2??

[@wiktorzwolinski5317]

I sold my mp1 for mavic 2 zoom. You are able to modify horizontal speed(up to 90kph), vertical speed(up to 10m/s), and add atti mode instead of tripod, to do this just download dji assistant v1.2, and set it to debug mode. To bypass 500m limit You'll have to try pressure box method. Cheers

[@century750]

@@wiktorzwolinski5317 where can i find assistant v1.2

[@wiktorzwolinski5317]

@@century750 Here is the tested link: kzbin.info?v=OOsTc0HKTCw&redir_token=c2bXuAr8c-MAVQpNJTuWo6ff2EJ8MTU4NzQ2Mzc4MEAxNTg3Mzc3Mzgw&event=video_description&q=https%3A%2F%2Fwww.sekidorc.com%2Fpress%2FDJI_Assistant2_Installer_v1.1.2_20170527.zip cheers

[@wiktorzwolinski5317]

have you got messenger? i will walk you through enabling debug mode

[@lucknie2954]

@@wiktorzwolinski5317 bro , mavic pro How to set atti, what is the code. thank you

[@rtcfpv1012]

Awesome tutorial. Is there a NFZ and altitude limit hack for Mavic mini?

[@MultiBloxx]

Great to see you back Steve, I've tried this but keep getting JIT warning on ADB DUMLdore I've read maybe if I put my pc in safe mode it will help any input would be much appreciated I'm flying mavic pro. Thanks for your amazing work

[@neilwildy4192]

This went as per your clear instructions and DJI Assistant 2 is showing the 00.00.0 etc..., so that's ok... But FCC mode doesn't seem to have worked...I've googled the usual way of checking but it seems to be still in CE mode. Any ideas or thoughts?

[@hectorcastro7978]

I installed it in the mini, but now I cannot take pictures, is there is a glitch or I am missing something?

[@imanchin6128]

Hey so is this gnna be possible for the mavic pro 2. Im thinking of buying that.

[@WendysNuts4u]

you mean the Mavic 2 pro? 😋

[@reachfarfilms]

Naming conventions aside, what’s the answer to this dude’s question? Yay or nay?

[@WendysNuts4u]

@@reachfarfilms if it were possible on the M2P, DJI's latest most popular drone, then the description of this video would surely state it. apparently it works only on the original mavic and some other DJI models.

[@nia6849]

Do you mean to put all the custom parameters back to stock in DJI Assistant 2 before installing this new firmware?

[@El_Smeghead]

YES... *IMPORTANT!! Make sure you are on stock firmware before flashing to custom firmware.

[@Nebul3r]

just flash stock fw and then patch, later you can mod the parameters inside the dji assitant

[@fergy36]

Incredible tutorial. Was able to downgrade the firmware on my MP1, and then install the custom firmware. Everything seems good so far. I went into DJI Assistant 1.1.2 to verify that the NFZ are removed. However, I am not able to see the common use params items. Any ideas?

[@uiopuiop3472]

i dont know as of yet

[@mr_mnky]

I followed your guide (mavic pro), and everything seems to have gone OK with the flashing. However, I'm not seeing the exact same params in DJI assistant (1.1.2) as in yours. Specifically, the flying_limit_height_enabled is missing, and the airport_limit params are different). Any ideas what's going on?

[@alex529xela]

same here. I don't know whether we need to amend the params or not.

[@darbycarpenter3032]

I’m your opinion which is better. Use the super patcher to make the mods or back the firmware to 01.03.700 to have full control of everything?

[@Lightrevo8]

Hi, after the flashing. When you go back to DJI assistant 2, how do you change the height setting please ? Do you have a video of it please ? This new version works with all of the dji mavic pro ? Thanks

[@brett7406]

This IS in the video but as digdat0 points out theres no height limit parameters to adjust. Height limit is already removed with this mod theres nothing you need to do. It's all automated.

[@Lightrevo8]

@@brett7406 Thx For the answer Brett. Nice program. Everythink works like a charm :) :) Can you explain me what does the FCC mod to the drone ? Thanks a lot

[@vidda0082]

Can it be done on a completltly stock platinum? And what version of assistant 2 are you using?

[@spyder6000]

Did not work.. when I click load adb says exception error

[@harryyew9914]

Anyone cant help?I cant run the .exe file,it said system connot find the path specific TAT

[@brett7406]

But it in a user directory like Desktop, Documents, Pictures, etc.

[@dirkalthaus]

Is there Mavic Mini support planed?

[@thefortressishere]

I would be doing this to to change from CE to FCC as I live in the UK, but you mentioned don't do boost FCC unless we know what we're doing. Is there a risk if I use FCC option? Also do I have to download DUML dore first or do I use latest dji assistant or both? Just need to be sure. Thanks😊

[@Nebul3r]

if you dont know what it is then it will fry your RC so as suggested stay away and stick to FCC only you will get double range and where on earth did you read about using the latest DJI Assistant, did you bother reading the github page?

[@scottwilson8973]

Works great thanks

[@Uro_Cacho]

Hello Friend. You know some method to eliminate the NFZ from the Mavic AIR. Regards.

[@thepositivitychannelwithda5112]

Have you found one yet? I just bought this pos and am thinking of returning it. Worthless brick .

[@Uro_Cacho]

@@thepositivitychannelwithda5112 no nada aun

[@jackob9658]

Great video..

[@Nathan.Willan]

7:47, how did the interface on the right open?

[@ulightme]

HELP. I accidentally run Super Patcher on Mavic Pro (FW v01.03.0700) now I can't connect with DUMLdore. I can't connect with the PC or the RC Remote. Mavic has RED lights front and fast blinking YELLOW on rear. When connected to the PC device seems to be connecting/disconnecting constantly and shows up as (Unknown Device) in device manager. Please HELP

[@ulightme]

GOOD NEWS! After restarting my Mavic for 5 or 6th time and letting it sit there doing what you see in the video for a while. It now connects to the computer fine and I can flash the correct firmware :) whooohooo. It would seem like whatever I did before got it stuck in this repeating boot loop during which it was "healing itself" LOL .... finally it turned on and I can connect with DUMLdore again.

[@Rcenthusiast90]

So I have the option to buy a brand new Mavic pro platinum with a manufacture date of 7/19 brand new in the box never opened what firmware will this come with And should I be able to do this mod to it?

[@杨星星-v5h]

although it is 1.40.500, it also can be used by this method

[@eyeonyou3540]

Couple more questions. I finally have parallel on my Mac with windows 10 so ready to try it. First question during your video at one point you said after the fact you restarted your drone. Does that mean I’m suppose to restart mine as well at that same point? And after it’s all done and I’m ready to use DJI assistant, can I use it on Mac or so I have to use it on windows?

[@eyeonyou3540]

No one?

[@ClifD]

Excellent! Exactly what I was looking for! Nice work!

[@GovDubz]

Love the 1980s adult movie music lol

[@pedroisctube]

Sick guy

[@StephenG007]

Followed all instructions and flashed Mavic 1 twice successfully but it won't stay connected to controller for video transmission. The connection to controller still seems normal but video says disconnected. I even flew a couple feet but video doesn't come in. Should I flash the controller to newest firmware? It's still on old version. Can I upgrade to .500 via DJI app now?

[@vetti39]

Hi had a question, what vpn do you use ?i had it on my phone, lost my phone

[@bong75]

Did i missed how you connected the computer? Where did you connect it to? The USB on the Mavic or the controller?

[@SaifAli-uk9do]

me too

[@onthedownlow100]

@@SaifAli-uk9do me three

[@brickdy9754]

Awesome video. My Windows 10 resisted me all the way but in the end the patch stuck. The FCC boost is a power hog (over 15 percent of the RC's battery per flight) but totally worth it. Can't wait for the v01.04.0500 patch.

[@Boundary327]

Thanks for the great videos. I have a Phantom 4 Pro V2 FW version V01.02.5000 and am unable to down grade to FW version V01.00.1500. Am I doing something wrong or has DJI added changes to prevent this?

[@杨星星-v5h]

do you have method for this? it hard to roll back from 1.02.5000 to 1.00.1500

[@maurojosejimenez]

did you manage to do it

[@jonp139]

I am considering adding this mod to my MP, but my fear is the CSC addition. If I accidentally hold the sticks for the CSC maneuver while flying, do I risk it to come crashing down?

[@_google_user_]

Does this have a problem with precison landing, as other mixed firmwares do? Also can one remodify the config file to add a height limitation, would that cause the app being the latest to recognize the limit and impose its own again by default?

[@TheNikolasNick]

Once u complete the process what app do u use? Can u use the djigo4 stock app or u need a modded app and if yes were do u get it from?

[@mateuszgaczkowski9870]

question. if on Mavic pro 1 the current version is 01.04.0500, it could be the reason for the problem with puch update? everything is going well but the modified version is not showing

[@TheSkyPod]

Hey , at 1:55 you say to install stock firmware , but is this also a way to downgrade firmware ? Im on 01.04.05000 on my Mavic Pro . Had to send in my drone for gimbal repair and they replaced my GPS and took away my 4 year old hack .

[@juanete69]

I have read superpatcher is not maintained anymore. What should we use instead now? Anywaw, is it still safe to use it for patching the V01.04.0300_Mavic_dji_system version?

[@AEROVISUALES]

Hi there, thanks for all !!! just one question, the soft indicates me to use P4_SP_2.0_Standard_ but since i have Phantom 4 Pro i think i shuld use P4P_SP_2.0_Standard_ rigth? because i guess P4 is por Phantom 4 and P4P for 4 Pro. i am OK? thanks in advance.

[@jagwal1]

Back in the days I considered this but back then you had to sacrifice the precision landing function which was a deal breaker for me. I understand that this is fixed in later updates is that correct?? Edit; this is regarding the Mavic Pro

[@HelisisElektronikLtdSti]

Nice work congrats. Is matrice 600 and 600 pro supported?

[@mathijsroelofsen]

is it possible to update the DJI app without removing the patch? Is the patch still working after Update?

[@richardwebb5777]

patch has nothing to do with dji go4,use any version you wany

[@demers197]

i need mod for mavic mini or enable debug mode on dji assistant 2 please

[@RicardoTheCraneOperator]

Hi, did this open the galileo satelites? after some use time what's your opinion in general about installing this on the dji mavic pro?

[@lokz9632]

Hi. My Mavic pro is currently on Mavic Pro FW V01.04.0500. Does that means I need to downgrade it toFW V01.04.0300? Do I downgrade through DJI Assistant 2, or there is some other file for download? Is there an option to flash unmodified FW V01.04.0500 later if I need to? Do I loose anything by downgrading to Mavic Pro V01.04.0300? I live in EU, CE region, basically all I need is stronger remote signal.

[@amitinderdeepak]

I have done it all by rooting, and using mixed mods etc.. but some how the super patcher just doesn't run on my computer... The Cmd window opens and a few lines are displayed and then the Cmd window shuts off all in a second or so.

[@brett7406]

Try running from a root directory or making a user name with no spaces. This is a weird idiosyncrasy with cmd. It sometimes recognizes that names with spaces are all one thing and sometimes it thinks its two separate things. Im sure a more sophisticated programmed could solve this but for the life of me I can't. You can make a new user in Windows 10 just temporarly and this issue will be solved.

[@amitinderdeepak]

@@brett7406 , thanks for your reply. Ok so i reinstalled windows and everything is hunky dory. I went through the process again, and all was working as supposed to. Here the issue. The patcher went through a few steps as it should, ADb etc but when it came to the step of asking me to flash the modified firmware to the craft, i cant find the firmware file in the location folder. I mean the Folder "SP_Flight_Controllers" is there but nothing in side it. I also have a folder Stock_Firmware with the stock file in it. But no modified one. I ran the process twice on the Mavic Pro and both times i couldnt find the modified firmware. Kindly advise as to whats happening here. Awaiting your reply. Cheers

[@zanjakop4090]

thank you so much works great

[@cyrilducros2444]

Any idea if this is going to be implemented for the DJI FPV ? Please !

[@graficasholanda213]

hello I have mavic platinum firmware 1.04.0300 i put superpatcher to enable FCC but I would like to modify some parameters in dji 2 (I have downland of your link) I changed file main.js but when i am going to change any parameters the one I have before come back. I do not know what problem is. thanks

[@xanadusanson621]

please help me, super patch no work anymore in my mavic pro how can i do to unlock?

[@nikoz400]

Is it working for mavic 2 zoom ?

[@ThePalliz]

Old thread specifies V01.04.0300 I am running V01.03.0400 will this be a problem? Thanks in advance

[@skinnl18]

Thanks for this video!!! I succesfully patched my spark….but i cannot adjust the parameters in dji assistant 2 (version 1.2.5)

[@brett7406]

Need 1.1.2

[@skinnl18]

Thanks Brett and a happy new year👍

[@beeceeeee]

Hi, did exactly everything as above with assistant 1.1.2 and can find the mod parameters but cannot change the mods. apparently its read only. how do i fix this!? thanks

[@brett7406]

@@beeceeeee The parameters that are read only have already been changed. Height limit and NFZ limit are included automatically with this. That is the point of this mod. If they weren't read only you wouldn't need Super-Patcher. It's all automatic. You don't need Assistant 2 1.1.2 unless you wish to change something not already covered by the listed mods in the description.

[@IsraelSuperguide]

I need help pls. I have done so many times but i see no progress, once i press Flash Firmwear, it says Tranfering to device... but it never shows any %. So i dont know what I might be doing wrong. I have the Mavic Pro. The Super-Patchers says: Continue once ADB has been enable and Dumlore is closed. But Dumloader v3.20 after i pressed the flash firwware everything is grey exept for about and Download firware. which is for DankDroneDownloader and i dont know what to do with that becasue i di not see in the super-patcher. I appreciate your help. thansks

[@bsdgffishtuna5186]

mp1...I flew to 500m (1640ft) and my RC said MAX ALT REACHED and I couldnt fly higher. I successfly applied super patch just the other day. I checked to make sure the version was correct on NLD as well. Any guess as to what' s going on? i checked dji 112 and fly limit height still at 500m - the others are 3000m...I tried changing the 500m to 3000m but not sticking...help

[@ekphotography]

I just got done doing the hack, it says 500 but you can go well over that and no warning once it get's to 500

[@eduardorusso5612]

Do you know if there would be any way to configure pan movement of mavic camera gimbal in the right dial button on RC?

[@brett7406]

No but you can adjust the pan speed to be whatever you want with this mod.

[@brett7406]

The dials on the remote are powered by the app so you mod you want would need to done with an SDK app.

[@Ghost_Of_FPV_1151]

It flashed fine but dji updated assistant so you can't modify the parameters anymore.PLEASE HELP

[@jasonmccubbin7950]

I downloaded assistant 2 for mavic and wouldn't pick up my drone (MPP) then regular assistant 2 worked fine but when I connect I only have like 7 choices on left, black box, flight upload, simulator, wifi etc. nothing like the one you have or anyway to get to parameters.. what am I doing wrong? THANKS.

[@jasonmccubbin7950]

Nevermind I got it you need the old skool DA2 1.1.2 and heres a link to the video to get the extra parameters. kzbin.info/www/bejne/fIC4m5poeNd1e8U

[@matteopettinicchio4678]

I can't ... I have a standard phantom 4 ... can I know the exact numbers to press on the keyboard to do everything correctly? thank you

[@Nebul3r]

even a kid can now mod a DJI AC with the patcher and youre asking such non sense things

[@andrewx86x]

I had the latest firmware on my MPP (0500) and have managed to roll it back to 0300. I performed super patcher, but I still have hight limits and airport limits imposed when viewing the parameters in the assistant. I have tried flashing several times. The firmware version on the MPP is blank after super patcher, so it must have flashed the correct version. It showed that 0300 was loaded initially and the motors still make a different noise, consistent with 0300 firmware. I haven't touched the Tx. It's on 0500, but I don't think that matters. I re-flashed the 'stock' firmware included with super patcher. All flashing operations were consistent with the instructions of super patcher. What is going on?

[@DJIworldRecord]

That's because your 'FC' version is not right.😂

[@amitinderdeepak]

a great video but i tried launching the Super patcher and as soon as it gets to downloading, it turns off. programe ends. i cant get any further. Olease help

[@reganvater7755]

i am checking firmware in the dji go app then to about saying update firmware not 00.00.0000 did everything that it say to do phantom 4 standard help

[@MultiBloxx]

Hi see in your parameters you have airport limit data is blank, but in mine it's not present. If I search I find it but it's parameter is 0, any ideas why minis not showing the same as this video I've also used super patcher and all is OK I checked with the NLD app I'm just worried I miss something, or does anyone know the parameter for airport data limit

[@vidda0082]

How to modify parameters in debug mode? The value always vome back to its original! HELP please

[@markroberts2545]

It starts to run and then cant download the file even with virusscanner off. If i check the site manually from where the scipt will download the file is says bad request. Any idea ?

[@bobotube76]

Can I use this tool to enable FCC or boost mode on Mavic Air 1?

[@massimilianop.6913]

sport mode am I wrong or does not work?

[@arasykeysha]

Well done, btw steve with this sp2 can the max speed set to 20?i can set it to 20 but when restart it back to 10,i see your favorit parameter it show 20 for max speed

[@brett7406]

That max speed parameter doesn't do anything. This is in the FAQ section of the ReadMe on GitHub

[@Nebul3r]

set speed parameters in the Assistant after the fw patch is complete

[@arasykeysha]

@@Nebul3r it can just once, after u restart back to 10

[@matteopettinicchio4678]

I succeeded, but I miss the string to change the height (g_config_flying_limit_limit_enabled) why? yet I recorded the firmware recommended by you

[@brett7406]

Height limit is disabled by default. There is no height limit and it is not possible to set one. If you'd like your height to be limited again you need to flash stock firmware again to undo Super-Patcher This is covered in the video and also the readme.md on GitHub. github.com/brett8883/DJI_Super-Patcher#remove-height-limitations-by-default

[@eme4289]

Can you please tell me if i would need to update to 1.04.0300 first and then use the super patcher tool. And can i use assistant to update to 01.04.0300. Any help is appreciated. Thank You

[@Ceasar_Gr]

I can't find any executable file on that page,. Any help please?

[@xperiahkarc]

hi digdat, after apply the super patcher, the altitude will be unlimited? and the height limit set in the dji go 4 will be ignored?.

[@carminecarteo7668]

Hi digdat0, I have a mavic pro with original firmware 01.03.0800. Can I use this tutorial to mount the 01.04.0300 mod?

[@RobTinga]

First upgrade to stock 01.04.0300 then Run this mod

[@carminecarteo7668]

Rob Tinga, ok 👍👍👍

[@lucaesposito1640]

Hi, great job!!!! Can i update DJI fly safe database with this patch? thank u

[@Arxonrage]

Mavic Pro, at step: adb shell mount -o bind /vendor/bin/dummy_verify.sh /sbin/dji_verify Command "mount" is reset after a bird reboot. DUMLdore does not allow bird to flash until you turn off the ADB (button not working). How disable ADB or flash bird in ADB mode?

[@brett7406]

Close dumldore. Adb does not affect the ability to flash but having two instances of dumldore open will. This has actually been solved 4 your script won’t continue till you close dumldore now so moot point now

[@jobbo89]

Why has my 90 degrees auto shutdown been disabled after applying Super Patcher?

[@sanahaskuranage8071]

does it work with inspire 1 V2?

[@kevwaite]

Will this allow to rollback inspire 2 firmware v01.02.0400 that as standard has no option to be rolled back. Can this be reversed back to stock firmware in the future if needed?

[@leonardopinheiro2864]

Hey, it work With phatom 3 se ?

[@droneready8278]

Are there any furmware/software mods for the Mavic Air??

[@sedinix]

NLD show my controller version is 03.02.43.12 process go well but I think Im not in FCC how to check it ?

[@yuvalko123]

Well Done brett!

[@Thomas_Valentino]

Is this usable on an air 2 ? I have one that refuses to activate

[@kingdevine7374]

Do u have this software mold for the phantom 3 standard

[@SpookieNZL]

Hi I've done Everything as You done in Video but have Said NO to Smart Battery and Stealth Mode When I Check my Flight Controller Version mine is 03.02.44.22 Is this Ok Still? Thanks

[@brett7406]

Yes you have the correct FC #. The number changes dynamically based on the options you choose so just check what the program says. The last two digits indicate your selections. 2=no 1=yes ao you have said no to both optional mods

[@SpookieNZL]

@@brett7406 Many Thanks Mostly Appreciated 😀😀👍👍

[@drummerdonniedotcom]

By "stock" firmware, can that be any unmodded FW version? I have been running legacy firmware on ALL my drones. I just want to make sure that "stock" doesn't mean "latest."

[@brett7406]

The firmware needs to be the stock version of the supported firmware for your aircraft as displayed on the screen at the start of the video or in the readme on GitHub. This theres no reason to keep the legacy firmware anymore

[@woodygusix8687]

@@brett7406 I am using legacy V01.04.0100 on my MP. I found anything later caused video issues with my Samsung S5 phone. Any thoughts there Brett?

[@Nebul3r]

@@woodygusix8687 this is an AC side mod, your phone is attached to your RC

[@antoniocembrola5184]

What can we do to increse the speed ascending /descending in normal/sports mode?

[@wiland3986]

For just that you can do it just modifying some parameters on an older version of dji assistant. Google that and you can put your spark a lot faster. And it's very easy to do