Dillon 550B Unboxing And Mounting

[@CWfist]

Simple and sweet... I am still using a Dillon 450Jr ( bought at around 1987 and still running ) .. for .38, .357 and .45ACP... Dillon the best value out there,,, now am considering the 550 for 7.62x39 and 5.56... Thanks for posting

[@williamosborne2451]

Good job. I have just re-unboxed a 550B that I've had in storage for over 20 years. I was feeling a little intimidated about getting started again but after your video I'm ready to make some ammo. Thanks

[@BigBear1946]

+William Osborne The Dillon 550B is a wonderful machine. It is quite easy to set up and use. I'm sure it will be easier then you thought. Good luck.

[@gec4101]

Great video. Thank you for posting. Got the workbench built today. I'll be setting up the 550B after work tomorrow.

[@wrxs1781]

Well produced and informative, one of the best tutorials I have watched on KZbin.

[@chrismorgans4207]

I just wanted to say thank you I got the 550b and there was no user friendly way of setting it up and just watching your video I have it all together.

[@BigBear1946]

I'm glad to hear that and thank you. Good luck and enjoy your new reloader.

[@ericthomas5172]

Thank you so much for not saying ummm ummmm and moving your camera out of focus and aiming the camera at the floor etc. etc..... Great video, very to the point and informative. I appreciate it.

[@BigBear1946]

+Eric Thomas Thanks

[@MrToonfish]

Thanks for instructions, I ordered my RL550B yesterday in France and can't wait to set it up on my reloading bench ! Cheers, thanks for sharing.

[@theociba2781]

Excellent video - very informative. This assisted me with setting up my first rig - as stated below - with no bs. Thank you for taking the time to put this together for us.

[@BigBear1946]

+Theo Ciba Thanks for the kudo. Glad it helped.

[@Yukon12gauge00buck]

I'm liking your opening music. Just picked up a 550b myself. Complex machine but it works like a charm.

[@TORCHrider]

One of the best 550 setup videos I've seen. I will be sure to reference it when mine arrives. Thanks for taking the time to make it. I'm subscribed.

[@veerchasm1]

Well done. Great teaching and camera work. Easy to tell what's going on

[@barndweller4573]

I am ordering my 550 tonight, your video was very good and easy to understand. Thank You

[@daleswanson1784]

Good job, concise and direct with no BS!

[@brianonthego]

Well done. Very professional presentation. I may go without the strong mount like you did.

[@jimaugustine1827]

Very good video!! Well lit and the work area is clean. You can see the entire process without having to look at a bench piled high with stuff. Keep up the good work.

[@sman222222]

Great job!! Your very thorough. I wish you had a video on installing and calibrating the dies as well. Much better than the rest.

[@UrbanArmed]

Great video Big Bear. I just got my Dillon 550B Yesterday, can't wait to get it setup!

[@A.Mad.Lad89]

Great video, sounded like a military instruction video!

[@tomfederico]

Finally someone made a video with the viewer in mind! This was great. I, as well, would encourage you to do some more reloading videos. Thank you!

[@daltonwammock7098]

Thanks for making that video big bear, I'm just getting started into reloading and it helped a great deal.

[@BigBear1946]

You are welcome. I hope this made setup a little easier. This was my first try at reloading and this machine made me feel quite comfortable with it. Great machine. Good luck.

[@azizonacruiser]

Enjoyed your video. I would encourage you to make more. Looking forward to your reloading die setup.

[@metalisit]

Best video out there on the 550B. Thank you for making it. As some others have stated as well, I would encourage you to make other reloading videos, including the die setup.

[@FlyingJJD]

Nicely done! This will be very helpful as I'm about to bite the bullet, pun intended, on a 550b. Happy reloading!

[@levinowell1229]

Great video! Thanks for taking the time to make it.

[@StablerOutside]

Thank You, I appreciate the video. My only "issue" would be that next time make sure your License plate is not visible. That could get you some unwanted attention. Thanks again and stay safe!

[@Scooter101466]

Excellent video...thanks...very clear and informative

[@thecactiguy885]

great video, very informative. I volunteered to help some one to help set this up tomorrow. I'm only used to Lee single stage presses. your video will help tremendously.

[@ronsecondamendment2359]

Fantastic demonstration the best one I ever seen.

[@robertwiggins2724]

Pretty good for a "first time" video.

[@NaterTaterOutdoors]

This is a superb video big bear. You remind me of my father if he were to make a video except he isn't too much into technology. Lol

[@air9carbon1]

very very good video. i think you've got the knack for it Big Bear

[@marcb2k]

I'm building a reloading bench right for my 550, and was wondering if you have run into any issues with using the C-Clamp to hold the press to your bench instead of mounting it directly.

[@Tetonman714]

Many thanks for a very informative and well done video!

[@72spawndn]

Very well made video. Thanks for the great instructions.

[@hitmhard]

I'm going to use this video as reference when I setup my 550b I'm expecting it within the next few days. Screw the manual....lol

[@BigBear1946]

Thanks supervetteC6. Thought I was going to make the perfect video. After many retakes and edits this is what I came up with. Fairly happy for my first video but a long way from perfect.

[@ARPatriot1776Official]

Nice, enjoyed the video!

[@RangerDave1959]

As I am reboxing my dillon 550 b I was hoping to see how everything fit in the box. I cant figure out where the actuator lever goes.

[@BigBear1946]

Sorry but it's been so long since I unboxed mine that I can't remember.

[@310declan]

Very well made video. Thanks

[@MickMcMahon]

Great tutorial, please consider a die setup vid too

[@Billbobaker]

How much did that cost you for everything?

[@mikescarano8711]

great video as stated below

[@minifigjake]

Great video! Also, you sound like Mike from Breaking Bad (one of my favorite characters)

[@bubbacrabb]

That's exactly what I thought

[@MountaintravelerEddie]

So....how do I get a .308 case dislodged from the depriming / priming die?!? My kids got into the garage and accidentally pulled the lever.... Good thing I was out of powder.....but holy shit that .308 brass is stuck in that die really good!!!! Any suggestions besides to spend some more $$$ to get another die?

[@BigBear1946]

Im not sure but it sounds like it's time to get out the screw driver and pliers. I think it will just take time and patience.

[@walterkennedy942]

Yes, very good - thank you

[@erikmortenson73]

Well done! So much better than the "other guys" that make videos on this subject.

[@periclesfreitas]

Excelent. Very didactical. Why, the heck, do I need a manual for? Regards from a brazilian shooter.

[@Russell-1]

Yes you did make a superior video.

[@351Fahrenheit]

Great video, thank you!

[@quarrytrash1]

Excellent video, thank you!

[@philregular1465]

You remind me of Mike Ehermantraut from breaking bad

[@mobrewski]

Enjoyed, thanks!

[@bobkeller8383]

excellent video. thank you.

[@ridgerunner5772]

The installation of the powder assembly and adjustments are amiss....

[@ddog4920]

great vid bbear

[@joeleadslinger6138]

Good vid you only skipped a few steps lol

[@olemartinrasch9978]

du klarer jo ikke å gjøre noe bedre