Direct to Film(DTF) Printer/ Acrorip 9 settings walk through | Part 1

[@yourunclesam6780]

Great explanations. Thanks

[@primalgraphx5747]

I’ve had issues with making grange sheets obviously you can use this program but if I’m importing a premade graphic from photoshop acurip may crash. I’m thinking it’s file size. Have u come across this issue?

[@t-shirtcrusaders2547]

I have experienced that before and I recommend importing png files. For some reason a lot of rip software programs work better when you save everything in png format. Also, make sure you adjust the size of the image a little bigger than what you want to print with. I usually use the crop feature in photoshop or illustrator and it makes your printing jobs run a lot smoother. Hope this helps

[@onlyfun4life873]

Guys please don't know what to do... Mine only print on the left side of the sheet... Don't know why...i tried different design but it keeps printing on just the half of the paper... Is it due to print size or original size of the design

[@christineketcherside2133]

How do I get my square to be the correct size of the image? When I import the image the square around the image is bigger…

[@t-shirtcrusaders2547]

You have to clean up the png in illustrator or affinity and crop it correctly to size.

[@RAH-ze7iu]

What is the correct paper size to enter when printing A4 size in acrorip

[@t-shirtcrusaders2547]

You can enter 8.5x11 but just remember when you print an image you have to leave about a quarter to a half inch on the top and bottom of the page because the printers can’t print a full page

[@rostprint6176]

Hello, please tell me how to set up acrorip 9.03 for roll film feed on l1800 printer for dtf

[@t-shirtcrusaders2547]

I wish I could but I have no idea how to set that up. I didn’t have a roll on my printer. You can join some Facebook groups that’ll show you how.

[@RAH-ze7iu]

How do I get my matte on the screen where the image goes to A3 size matte cause my matte size is A4 in acrorip 9

[@t-shirtcrusaders2547]

Where it says paper size, adjust the sizing to your liking.

[@veto0485]

How do I add several pictures to printing one sheet?

[@t-shirtcrusaders2547]

You’re going to have to gang them up in photoshop or illustrator and export as a png. Unfortunately acrorip doesn’t let you add multiple images at once. Unless you are trying to duplicate one image then there is an option for that.

[@dalebrown2128]

Can acrorip 9.3 work with the xp 15000. Just mainly need the print function with white ink . I can do the rest in photoshop

[@t-shirtcrusaders2547]

I have no idea. Most likely not. Acrorip 10 supports for sure or Cadlink.

[@media8168]

Man I followed the instructions but my 1390 keeps not printing white is did you have this issue

[@t-shirtcrusaders2547]

Never have had that issue before. Make sure you are about to print to check mark the box that says print white and color

[@kb155bus]

Using acro rip 9.0 and can't get white to be highlighted help please

[@t-shirtcrusaders2547]

you have to go under the white tab and it should give you a white highlighted option.

[@marjorielemoine6051]

hello great video, I tried to printe a picture with white underneath it didnt work even i follow your instruction , any help please

[@t-shirtcrusaders2547]

Is your file a png?

[@kilslo312]

I'm constantly getting a white background in the acrorip even though I made it transparent any info on this?? Thanks regardless

[@t-shirtcrusaders2547]

Yea it happens sometimes. Did print it out and the white background printed?

[@kilslo312]

@@t-shirtcrusaders2547 I have not converted the printer yet. I was testing the program out.just makes it hard to move image to where I want it on the sheet itself.

[@t-shirtcrusaders2547]

@@kilslo312 well it’s fine then but if you have the issue when you print then you have a problem. I recommend you get a better software in the future, trust me you will thank me down the line.

[@kilslo312]

What do you recommend? I have the Epson stylus pro 3800. I have everything to convert the program would be the only downfall when I do.

[@t-shirtcrusaders2547]

@@kilslo312 I’d recommend the newest version of acrorip 10 or Cadlink Just make sure Cadlink is compatible with your printer. They have a list on their website

[@donnapedroncelli5145]

Just installed AcroRip 9.3… printed a test page through the printer preferences. I can’t get anything to print or printer to respond when I try to print an image. Printer is Stylus photo R2000… New to all of this!! Can anyone help??

[@t-shirtcrusaders2547]

Make sure you print through the rip software. So open the software and import and image. Make sure you select the correct printer driver.

[@chenaeM7]

where do you download acrorip. I’ve purchased from 2 seperate companies and then they send me a usb but when i insert it into my laptop it recognises it as a bluetooth… i’m confused

[@astinson3556]

How can I printer just the white letters from my logo without making a block of white on the shirt

[@t-shirtcrusaders2547]

Not 100 percent what you mean, but I’ll partially answer the question from what I understand. Make sure your artwork is edited properly and then in acrorip only check mark white only when you’re about to print and make sure color isn’t check marked. Then make sure your high light white is check marked at 100%.

[@astinson3556]

@T-shirt Crusaders sorry so I have a black logo with white letters. I'm trying to print the logo on a black shirt. So I only need the white letters to go onto the shirt. When I tried to print the logo out onto the shirt a big white block was printed out. So then I tried to print with using the other setting for 100 percent white under color pixels and the white only setting on print option. The shirt still came out wrong. I just want to print the white letters from the logo onto a black shirt without having to put the black ink onto an already black shirt. Can you help me lol

[@t-shirtcrusaders2547]

@@astinson3556 ok I totally understand what you mean. To me it sounds like artwork issues that you need to correct in illustrator or photoshop. You’re going to need to remove that black in those programs. I think acrorip has the option to remove black from the logo, but since you’re printer is printing a white block, sounds to me like you didn’t save the logo with a transparent background when you exported the file.

[@astinson3556]

@@t-shirtcrusaders2547 okay thank you so much

[@yasermacowmayow2851]

How can I get Acrorip 9

[@t-shirtcrusaders2547]

You can buy it on eBay, suppliers I have listed in my previous videos on where to buy dtf printers, Ali express, just google where to buy acrorip 9 and it should give a list. Hope this helps!

[@t-shirtcrusaders2547]

You can buy it on eBay, Ali express, and the list of dtf suppliers I put in my previous videos. Or you can google where to buy acrorip 9 and it should give you a list as well, hope this helps.

[@apparelillustrated6298]

@@t-shirtcrusaders2547 unfortunately it doesnt help. we kinda dont want to download a random file. we'd like to know who you trusted enough to purchase it from?

[@t-shirtcrusaders2547]

@@apparelillustrated6298 then I’d recommend getting acrorip 10 and you won’t have any issues with acrorip 9. Acrorip 9 is a pirated version, doesn’t matter where you get it. So, if you’re looking for something trusted, Cadlink and Acrorip 10 are the way to go

[@apparelillustrated6298]

@@t-shirtcrusaders2547 thank you sir. i have since found that out!