You DIDN'T FIX IT !

[@sidwainhouse]

That thing has done more miles up and down the ramp that it has on the road under his ownership.

[@classicbikelife]

I’ve lost count of how many times he has fixed something he hasn’t used

[@dirtygarageguy]

And then it fails again lol this has done less than 300 miles and it's leaked everywhere.

[@classicbikelife]

@@dirtygarageguy tried sneaking a sarky comment in French on his vid but I guess anyone who criticises him gets a life time ban 😂

[@jamesreilly485]

Remember he tried to say the fuel lines were perished when he took the mighty busa out of hibernation!!!! You could clearly see he had doctored this purely for the sake of a video!! I’ve seen plenty of perished fuel and brake lines in my time but this was on another level! What an arse!!!!

[@silky5366]

Matt, haven't watched your vids for a while as I have been deployed.... its good to be back 👍 Just catching up on all of your vids! 😎 It's also good to see that Del is still a D**khead!

[@cbuzz2371]

I can't believe Del's opening comment "its is boring ..." he might as well say don't bother watching. ! ? !

[@smokinrider]

I think we all know every manual says “only use brake fluid to lubricate seals” And I’m sure for decades when I watched the old man rebuild brake cylinders, a small bit of emery cloth on a rod with a slit in ( to make a mini flap wheel) was used with a lubrication of brake fluid to quickly hone the cyclinder and remove any pitting or corrosion. And this didn’t affect them in the slightest. We also used to neutralise the brake fluid with boiling water so it didn’t strip all the paint off everything!

[@TheMegaNanometer]

*shows a shot of everything covered in shit, brake fluid, flaking paint* *next shot* del: "pride of ownership" i cannot with this shit anymore, i love it

[@bfg5314]

Happiness seems to be loneliness And loneliness killed my world How could you guess When you're only thinking of yourself How you looked at other girls.

[@jediknight1294]

I was thinking 'and this loneliness Is killing me And I must confess I still believe' God I know the lyrics to too many shite songs.

[@mattploij2673]

Absolute banger

[@MrG61-u9k]

V423 EAW. 2019 MOT mileage 38642. Last MOT 2022 mileage 38733. 91miles use. Original cylinder rebuild Cafebusa day 16.

[@KrikkitWarlord]

😂😂 Barely even warmed up

[@Honkawsuzyamal]

BUT that's all on and off that lift which he abuses the clutch no end with him riding

[@Chambers36TheEnter]

How are you finding the vehicle information? All the sites I tried said "Vehicle details could not be found" for V423 EAV

[@MrG61-u9k]

@@Chambers36TheEnter Sorry correction EAW.

[@melthebelgian.5837]

91 miles on the road, 300 miles up and down on the lift.

[@Jonpilen]

With all these depressing quotes, I'm starting to think Penny has left him.

[@dirtygarageguy]

No, she's still there, holding the camera. I think he's whinging about people he used to be friends with who are bow slaging him off.

[@11metalfan]

​@@dirtygarageguy I love a bit of bow slaging

[@ritid69]

She left he for the guy who sold him the HDS back

[@entee123]

Imagine buying a delboys garage hoodie. Or a missenden flyer t-shirt. And then actually wearing it

[@alantraherne]

The flyer has gone all conspiracy theorist.

[@danielwilder115]

Ha ha del always shoots himself in the foot.

[@somborn]

Here we go again. One guy working his ass off. And another one shitting all over it for years and years doing absolutely nothing besides putting brake discs on his roof 😂😂😂 Great content.

[@whitecompany18]

Loneliness... Something Del will never have to worry about in that case.

[@kacperchrusciel890]

Progress coefficient of -1

[@YAMR1M]

Its been a great week.... Monday.. London Village to see Hoobastank... Friday house up for sale.... Saturday, London again to see the Foo Fighters and Sunday a laugh watching this... It's ended the week perfectly...

[@pauldowding8185]

Did you have to show the instrument cover again? It made my heart hurt to see it again.

[@phillipdale6464]

Wait till you see his Shakedown video , that really is just a money maker.I think the shakedown in the title refers to what he’s doing to his subscribers.

[@terryatkinson899]

Loneliness by Tomcraft 😊

[@_ck_]

man finding that "it probably wont leak again" line in an old video where he did it before was golden

[@rupertbollywood1190]

No, it doesn't seem to be a standard Hayabusa rad cap. I Googled the images. Yes, suspicious...

[@dylancrow7919]

Seen a lot of Suzuki ignition cables with electrical tape. Aggravates the shit out of me.

[@malcolmgough9971]

Lots of good pattern seals available, PBR and MCX brands for example.

[@dirtygarageguy]

OEM all thw way...

[@malcolmgough9971]

Nah, nothing wrong with those brands.

[@dirtygarageguy]

Because you say so.

[@malcolmgough9971]

Well PBR made all the brake and clutch components (including the rubber parts) for all Australian produced vehicles for something like 70 years, so maybe not just on my says so 😉 I don't know if MCX have ever supplied OEM parts, but I did fit them to refurb units for over a decade, so I believe I have sufficient relevant experience to recommend them. That aside, using a logical fallacy like that is bit like Del using tin snips to cut plate... a bit retarded and probably not something you should post on the internet.

[@dirtygarageguy]

"using a logical fallacy like that is bit like Del using tin snips to cut plate" - Okay. So I'll make this clear. Do you know what the sea; pressure is on a seal or are you just going to guess? Different seals have different specs like bearings. Hence why OEM seals are the best option. So, now argue against that.

[@roxrus5217]

Not washing or cleaning for repair/service is a pet peeve? Shows a certain mentality? Dell, I can remember a while back when you was working on your Goldwing brakes in the winter... bike was a in a complete state and looked ready to scrap.

[@SeanRidley-g7z]

I had a gsxr 1000 k8. I converted that to cable clutch. Hydraulic is a pain in the ass.

[@mattman3495]

"When you take care of your bike this way." Noooo thanks

[@Ivan-gm7zb]

229,000 people following him laughing at how bad he really is 😂

[@stevesanelli90]

Classic Dingledell

[@Stephane1995]

The reason Del's grammar is so terrible is that 3 parra only communicates with hand symbols, for example ✊😮💦

[@mattman3495]

The Walker Brothers? "The Sun ain't gonna shine anymore."

[@BatFastard01]

Thought he already did this, ages ago? Edit: there ya go. 2019. But it’s never been used since!

[@yourhuckleberry1904]

Dell's Angel, QVC hands melt.🤲

[@communist-hippie]

Is that containment inside the clutch. From that grease, he used when assembly, maybe? I only use dedicated silicon grease. Or justbrake fluid on internal parts/seal

[@munter10]

Del knows full well that he’s being reviewed by Matt, and others, and heavily criticised by all those that are knowledge based mechanics/engineers working in the game all their lives (like myself) but soldiers on regardless, he has too now, it’s his livelihood at stake if he stops making vids for KZbin. He must absolutely hate it knowing he’s being shown up for his lack of engineering knowledge but the BS he spins is the aggravating factor for all that see it. He’s now trapped in a downward spiral and has no idea how to get out of it, so have some sympathy for poor ol d Delboy. On second thoughts, nah… he needs critics and viewers to keep him going 😅

[@Hverbpro]

I still don’t get this whole ‘thing’ surrounding brake bleeding - it’s never been and never will be a big deal.

[@simontucci8170]

It's just like soldering. Absolute piece of piss but tards like Del make a huge deal out of doing it and come up with all sorts of bodges rather than just learning how to do it.

[@munter10]

I’m with you on this, it’s basic Hydraulics 1:01. There are proper techniques for moving air out of Hydraulic hoses using fluid to displace the air. Once you’ve learned the best way, it’s not rocket science.

[@royburns7496]

I watched the original last night after coming home from work by error it was depressing

[@BungleBare]

Is that Del’s whiteboard at the beginning of the video? There’s so many mentions of loneliness and betrayal on it lately that it makes me wonder if it actually belongs to Morrissey; the professional miserablist.

[@jediknight1294]

Morrissey has better grammar and is less racist.

[@Drainingtheswamp2022]

Tomcraft- loneliness

[@JayVtec-GAMING]

DelBodge Garage

[@wibblywobblyidiotvision]

To be fair, at 42:43, that's probably not filth dropping off it. It's been sprayed with tough black, spent some time in the weather^H^H^H^H^Hworkshop, and has now had a good bath in DOT4...

[@r3g3d17]

I don't think that black stuff was dirt, I think that's his tough black!

[@pipes9878]

Didn't Suzuki recall Gen1 and advised not to put panniers on them as the tail cracks 🤔 random memory from over 24 years ago lol

[@H-M-78]

I had the same issue. But there is a part missing, a rubber dust cover. I you watch 04-on part diagram it is there but not on 99-03. My bike is an 03 and it had that rubber dust cover. But I forgot to fit it ones and it started leaking. Road grit gets in there in no time. On the Gen 2 Busa they fitted a steel cover witch is a much better solution.

[@kremlinfuize]

If it failed that quickly after doing it before, and they are apparently cheap, why would you not just replace the whole thing?

[@pinussylvestris]

When cleaning parts with vinegar you should lube them with olive oil.

[@seanbax2622]

Will it fail an MOT with the master cylinders at there stupid angle? As they look empty.

[@alexbastow7915]

Did he just dump coolant all over the lift and floor 😂 why wouldn't he put something under it too catch it. It's almost like he didn't realise coolant would come out of the hose

[@alexbastow7915]

I heard that coolant hitting metal I am sure

[@alexbastow7915]

Ohh there was a tiny rattle can lid underneath

[@SixWheelsDown]

35:29 that seal isnt replaceable without engine removal and disassembly the same way the output shaft seal is? either way it wasnt leaking do you replace seals that arent leaking just for the hell of it?

[@__Max-oe6zm]

Depends on the model some can be replaced easier than others

[@TheMotospot26]

He puts the rubber grease over the bottom of the piston then slides the seal over the top of the piston then wipes the rubber grease off the bottom 😂

[@tones61]

Hi matt, if you put the rego into the online mot checker, it'll say the mileage between mots 🏍️👌

[@gercole1651]

Did the seal fail due to lack of use?

[@butunercouk]

46:09 👉 that facial expression

[@thegavel628]

Where's his coolant overflow tank /reservoir line?

[@giedriusbruzas6542]

Didnt we have this video already with a harley or I am having dejavu?

[@mackey631]

2.38 that looks like a clutch fluid that has had water in it and boiled the shit out of it goes like muddy shit

[@fzr600dave]

I think he put all that dirt in there himself

[@H-M-78]

I had the same issue. But there is a part missing, a rubber dust cover. I you watch 04-on part diagram it is there but not on 99-03. My bike is an 03 and it had that rubber dust cover. But I forgot to fit it ones and it started leaking. Road grit gets in there in no time. On the Gen 2 Busa they fitted a steel cover witch is a much better solution.

[@fzr600dave]

@H-M-78 I would agree with you but the bike has only done 90 miles since he changed the original seal 5 years ago, not enough time for it build up dirt and grime at all

[@H-M-78]

@fzr600dave I know the video is just a filler but it is a very sensetive spot on the bike and my bike was about new back in the day when I was cleaning the chain cover (completely unessesary) and forgot to fit that part and loose it. Bought one when I realised my mistake not many miles after. It's interesting to know if the 99-02/03 bikes did come without that part or if Suzuki just forgot it on the parts diagram. Extremely bad design if that's they came without it. D-Man got lucky if he didn't fake it 🤣

[@CodyT362]

I didn't realise it was broken! *replying to the title

[@deadprivacy]

It wasnt up until you went near it.

[@CodyT362]

@@deadprivacy I didn't touch it, I only touched myself and that little boy 😭🤣🤣🤣 *for anyone reading, that is sarcasm, welcome to the Dirty Garage

[@deadprivacy]

@@CodyT362 ah that explains all the copper grease found at the scene.

[@CodyT362]

​@@deadprivacy like Del in this video, I stuck it in a new seal bone dry and tore the seal 😉

[@deadprivacy]

@@CodyT362 yeah... this has gotten out of hand.

[@AndrewSinclair-bk9ho]

Is Del studying Musashi's DOKODO?

[@ma61king]

Did someone in the zinc industry steal Del's girl? Why does he hate plating so much?

[@archiedentone5950]

They lowered the monetization time limit

[@dirtygarageguy]

Any proof of that? What is the limit? I've never heard this limit

[@archiedentone5950]

@@dirtygarageguy years ago before I lost my original there was so I assumed there was. That was at the transition to Google

[@jediknight1294]

​@@dirtygarageguyover 12 or 14m used to be the sweet spot to get 2 ads on a vid iirc, they may have dropped it to 9.

[@butunercouk]

My youtuber friend talked about it yesterday, she said 8 minutes, thats all I know.

[@shaunappleton5153]

I suspect Del drives to his workshop in his car, does the minimum he can for a video to make money then drives home. No evidence of any other bike other than those that go nowhere and detrioate, with help from the bodge meister general.

[@gafrers]

So according to the quote at the beginning; Del is friend with the whole world, since he never improved anything. Del never changes.. well he does in a way, he gets worse, lazier, cheaper and more repetitive. We all know sub number is a sign of quality of the person making the videos. 🤣🤣 The busa looked Great when he started

[@leoa4c]

I BET YOU he faked that clutch drip! I go all-in on this one!

[@johnmclean4911]

There looked an offal lot of brake fluid on his paper towel. If the leak was that bad I think it would have drained the master cylinder. By the time Dell had discovered it was leaking. Plus the bike would have had to been on the ramp for a fare while as well. I think Dell just makes up problem to make films.

[@Ivan-gm7zb]

Did he not rebuild this years ago? And how is it leaking on the stand wheres the advance of it around his work shop? Man hes full of 💩

[@ianhoyle8459]

It’s not been riden for years the chain and front sprocket so clean, but the rest of the machine is dripping in shit. 💩

[@jackking5567]

I actually think he's about to close the channel and return to driving buses.

[@ktmturbo5836]

😂

[@ShurikGi]

why the heck do you pick on others people work...

[@dirtygarageguy]

@@ShurikGi why the heck don't you?

[@jediknight1294]

Has Penny chucked Del? The whiteboard is a bit just been dumped.

[@UnCivilEngineerIRL]

A few other people in the comments coming to the same conclusion, I thought it was just me. Need to keep en eye out and see if the camera is always on the tripod or if someone else is holding it. Maybe over the coming weeks to account for any backlog in the videos.

[@wilbertbirdner1303]

CafeBBQDinnerTrayBusa

[@andyand100]

😂