Disassembly Ninebot G30 G30P MAX Scooter

[@dirkh.5387]

Nice one! May be you make Part 2 with disassembling the tires / motor / drum brake and the ball-bearings or have a closer look at the electronic parts.

[@Linuxdirk]

I love how well maintainable the scooter is. The screws hidden under glued on things is annoying, though. Especially on the front wheel. The bearings sometimes need to be changed very early (not even 120 miles and they make grinding noises on my G30D II) so accessing the front wheel without removing stickers would have been great, but hey, hopefully the soon-to-be installed high-quality bearings will not have any issues anytime soon.

[@markoglibetic8617]

Why does everyone have bearing problems with the front wheel, never rear wheel. My ninebot made these grinding noises after 300 kilometers (around 185 miles) and now after 1700 kilometers it has completly broken

[@Linuxdirk]

@@markoglibetic8617 The rear wheel bearings are covered by the motor but the front wheel bearings are exposed.

[@topnee]

I just switch out back mudguard watching your video. Thank you so much 😊

[@angrydragonkungfu9164]

Great vid! The max looks like a very well constructed scooter! Seems like a lot of thought went into it's over all design. Great engineering! No wonder why it's $650-$800 bucks. well worth it!

[@gtone339]

Its a big step up from the Xiaomi M365 & the M365 Pro ver as well.

[@pashko90]

I'm badly waiting for a max plus with front shocks and removable battery. Finally this good overall design will get right of this stumped bottom plastic cover.

[@TheRealUnconnected]

@@pashko90 You'll be waiting a long time for removable battery, 90% of users don't need it and don't want it (compromises water resistance) as for front shocks, its easy enough to do this yourself if you want them.

[@wingerrrrrrrrr]

@@pashko90 the battery is removable 6:51. Just not very easily- lol

[@DL101ca]

@@pashko90 are you going to carry a 20lbs battery around to exchange when one runs out ? Otherwise it's unnecessary to have a removable battery, save for replacement when one goes bad but that is simple enough with the current setup.

[@routine8]

Wow! Thanks for posting this. I think it is undeniable that the MAX G30 is an ABSOLUTE UNIT!

[@ercanmamudovski9972]

did u solve this?

[@luicestlui7714]

La meilleur des trotinette que l'ont peu acheté ! Qu'elle plaisir de rouler avec !!!! Le meilleur achat que j'ai fait depuis des années merci à segway et tout ces ingénieurs ! Je suis l'homme le plus heureux sur terre :p

[@cbre1971]

Great video however, can we all stop with the jingle music that's supposed to make us feel up beat, but instead makes us angry haha

[@deerenzo]

Great job! Can you tell us about all the battery information? Because I would like to buy a spare pack to exchange it, when the main battery is low or dead.

[@mattalford3932]

Nodbot makes battery kits for the max. Even a 48 volt upgrade so you can go faster.

[@pashko90]

Thank you for awesome video, right now I know what kind of hardware do I need to assemble my max, witch one I got in peaces. Thank you! This video is very helpful!

[@r6_3600]

what size spanner wrench I need at 3:05 and 4:40 ?

[@jasonp8025]

As a warning, since this bike is easy to disassemble it's also very easy to steal even when locked behind the wheel with a strong U Lock. A thief took my Max G30 in under 10 minutes and left the lock completely intact.

[@Grandpa_RLP]

Wow, Awesome video. Will help many people.

[@rasheedgooden4415]

Now put it back together lol! Do one on the c80 plz!

[@amazingmao]

I see the cable going from the rear wheel hub into the main body/batter through an open hole @5:16 Wouldn't that mean easy water damage?

[@converse1729]

if you put it under water...yes. but at normal conditions like rain...no.

[@QuackZack]

There's a gasket around the wires to help prevent water entry. (Pay attention to 5:13 to the black rubber part once they pull the motor cables) Like the guy said above me, it's not meant to be submerged, only to survive large water splashes, like rain and puddles.

[@Sherlockohms303]

Dope video Bro I bought a storage unit and they had mostly old one but I found 6 of the g30 so thank you very much for the information your very smart hard worker like myself well im trying to be lol.

[@redcatred3932]

Спасибо за видео, но остались вопросы. Не показано, как было снято кольцо фиксатора рычага складывания рулевой стойки. Ещё более интересно, как его поставить на место, не поломав его. Светоотражательные наклейки лучше снимать при помощи теплового фена, подойдёт даже для сушки волос.

[@redcatred3932]

Решение нашёл при помощи фена. Греем кольцо до температуры пластичности пластмассы и аккуратно снимаем. Ставим также при помощи нагрева кольца феном.

[@nerdi_brilliantidea3314]

Thank you for all the guidance this was really great...

[@tospoooky4me-417]

Is this like some Chinese version? The Motor Ring is so huge and the connectors are completely different than my German G30D

[@wingerrrrrrrrr]

Anyone have a picture of the label on the battery that could be read? 6:51

[@MrFroggy29]

Great construction Better than 2000 dollars bikes

[@orazal2645]

4:23 Here they are using a T-15 Hexagonal Bit... Don't ask me how I know 😐 $30 and a headache well spent

[@ricardowhitley17]

What tool he use to open the bottom of the ninebot max to access the battery. Please and thanks

[@aubreybush5287]

Brakes are different and much harder to remove on my max

[@1wor1d]

Why is the person dressed like they're doing an autopsy on a coronavirus patient??

[@TheGrumpyMunchkins]

The Scooters were made in China.

[@yonfeny9912]

This is the dust-free workshop, anti-static, dust clothing

[@garrygarrygarry1]

It's generally referred to as a bunny suit, and most modern electronics manufacturers will require similar ppe

[@sadyberlioz7206]

Maybe he doesn't want to get electrocuted. There is a lot of energy in the battery.

[@golf4fame]

I can't even get the darn front tire off!!! The bolt just keeps going around and not even coming loose!!

[@fatihk.8896]

What about the tires?

[@MussaKZN]

Fatih K. The tyres Defy logic! you need a Thermic lance to remove these tyres!

[@umeedtv4822]

very informative video specially for me bcz i just got this ele scoti and want to chick this one from inside

[@UltimateGamingBoy]

All I want to do is replace the rear tire because I got a nail in it last month and it doesn't retain air anymore.. didn't know id need a PhD in transplanting and cutting wires and shit Jesus this thing alone was expensive enough..

[@RichieKeane]

Brilliant been looking for the type of blossom bit for the deck.

[@aubreybush5287]

Blossom bit? You mean security bit? Mine was a five point pentagon security bit to remove bottom cover

[@sp4rkbr]

Will a Tile tracker fit inside?

[@dctaken]

This is very helpful for when i need to do stuff to mines. And at the moment, both my tires are slowly deflating and I'm wondering if I need to buy new tires or inner tubes. I don't know how these wheels are.

[@DL101ca]

Tubeless tires.

[@pl8472]

Excellent! Now all the thieves know how to quickly turn your scooter into scrap for cash.

[@raduurdea6193]

Mine just started to develop a little sideplay on the frontwheel. Can the screws between the fork and wheel untighten during normal usage?

[@Bushcrawler]

Why not just remove the covers and check for yourself? takes 2 minutes :P

[@MussaKZN]

They can also loosen!!

[@suspiciousmembers7719]

@@Bushcrawler might be suffering from Segway induced trauma. These things are touted as either complete and utter dog shit to back to the future and beyond machine's! What seems like an ordinary task in one realm( cars) completely blows ones mind in Segway e-scooter world. I'm now proficient in: ☑️Control Board Diagnostics. ☑️Firmware script kiddie hacking. ☑️Quality &Control Board Certified. ☑️ DIY Customer Service ☑️ Error Codes'and debugging. Basically we humans simply wanted scooters not another skill set!🦉

[@jorgeluiscanosanabria9471]

Donde pedir la bateria del Segway NINEBOT KickScooter MAX

[@jorgeluiscanosanabria9471]

Where I can buy a batery of Segway Ninibot KickScooter MAX

[@Callmek0mmi]

What tool do you need to unscrew the under panel of the scotter

[@DL101ca]

Video shows T20 hex key.

[@lino5353]

A friend of mine used "Security Torx T15" in his Ninebot G30 Max. Has to be "Security" type for the central hole in the tip to match the central pin in the screw.

[@jpowellfed]

it's like dissecting an cadaver in anatomy class... :P

[@davidalba6781]

Why is my screw right behind and inaccessible to the wrench? Wtf

[@kartoffelgaming1633]

99.99% of the Viewers can´t assemble it now

[@kharlachong4353]

Which are the tools , please ?

[@thecam0073]

Lend me an icepick for my eardrums? Great video tho with listed allen sizes...

[@magicchef4938]

New max g30, I only have a beeping sound and no Bluetooth logo so I don’t know how to connect! Also how to take off display? What exact tool to use?

[@magicchef4938]

nevermind the display my bad, but the bluetooth icon on the scooter does not flash to activate the scooter....Tee "reboot" does not solve the issue.

[@iamintractable1805]

Why not something more specific like changing tires.

[@pashko90]

Same way as on 365, but since a tire wall is bigger, it's gonna be easier to replace a tire.

[@davidrubtsov6427]

My ninebot max scooter makes weird noises especially when you ride on a bumpy terrain. The sound is almost like plastic cracking or like something is rattling in it. What should I do?

[@lape9973]

I‘ve got the same issue, it comes from the upper portion of the stem. I can hear a metal sound when I pull on the brake cable and push it back in. I couldn’t see what it might be in this video though. The part, where the cable gets removed from the stem is missing.

[@ThePavelbychik]

Where can I buy tool like that?

[@wolfe1970]

Got a full protection kit then uses a adjustable spanner....

[@darwiniandude]

8 months and no one upvoted this. Where's the ring spanner or at least slot ones.

[@MARIUSM171]

I spoke with Segway team because I have error 14, they told me to do The reboot and now my kik scooter doesn't have any power to ride with me, the wheel is spinning only rotated by hand suspended and accelerated arrive at 29km/h but still Powerless when touch The ground...and when press for reboot is coming error 10 and 15. Any toughts???

[@pashko90]

Error 14 is a brake lever, error 15 is accelerator error. I think what your BLE board is defective. If you in LA I might be able to help you out. 5624999091

[@gaborm4767]

And where is the second part, the assembly video?

[@QuackZack]

Assembly is just disassembly but reversed.

[@bfarm44]

And why I don’t complain about the 600 it cost me. There’s a lot going on

[@subbe124]

Him: brutally murdering a ninebot max music: ☺☺

[@Okthanxsbye]

Has anyone taken off their handle grips for G30 to put different ones on?

[@AKhairaddin]

I have! I went to a bike shop and they removed them for me and put new, better ones on. You can also remove the stock clunky bell and replace it with a better one, It looks so much sleeker and stealthy, I love it

[@singthesong]

and the Motor?

[@TheyCallMeCade]

Back wheel is the motor.

[@beepbeepcoyote]

This is the level of breakdown IKEA would take to sell scooters

[@colinweiensteiner5911]

Shit i destroyed a plastic thing and the screws were so tight, that my wrench bendet

[@kartoffelgaming1633]

And now assemble it again

[@MrSoto]

Broooo I'm so mad you gotta do all that to take off that rear tire! I gotta do a simple tire change but all those wires have to get disconnected first... 💀

[@mattalford3932]

Could have used compressed air to remove that grip lol.

[@rexmabunga]

Everything, except the tires.

[@offshore_masterplan5892]

Dangerous! I'm not doing any changes to my Ninebot! 8)

[@AfterTiredComesStupid]

I'll do them on mine instead! 😂

[@louiec.9782]

Phuck the music...😫

[@davidmendoza6384]

It's not a T20 , it's T15 thanks for the false information now I got to go buy another wrench

[@crazychocopie3326]

Корявые, коврик не прогрели и оторвали Вот жеж мастера криворуки

[@teds4165]

Cool .. now do a Tesla

[@comingflex]

Цыгане самокат разобрали

[@giuseppelococo9184]

7r34

[@Pete..]

Oh joy, I get to read what a stupid joke

[@marsmannphotography]

That was painful to watch.

[@SubrosaRose]

The worst disassembly ever not heat gun no proper tools

[@AfterTiredComesStupid]

No heat gun for obvious reasons... the huge battery inside is flammable and glued directly onto the metal.

[@hailtothekingbaby69]

Plz how to disable Bluetooth on ninebot kickscooter E2 ..... any idea?