We Break a Engine Block into Pieces and Made Disc Brake for Semi Truck #discbrake #machineshop #machinist #amazingtechnology #dieselcreek #pakistanitruck #manufacturing #machinerepair #cuttingedgetechnology #cuttingedgeeng
Пікірлер: 3 317
@stefanpopescu6479 Жыл бұрын
For those who do not know metallurgy, it is an extraordinary video. It has a series of serious errors in the production of brake discs. The molding sands mixture is made as considered by the mixer, without moisture control, permeability, etc. They use cast iron from engine blocks, which is a superior gray cast iron, but it is melted at the cubilou, where they burn a lot of coal to maintain the lamellar graphite and prevent the formation of cementite. The result will be low-quality lamellar graphite cast iron brake discs. If you notice, it does not show whether they are checked dynamically or statically. A disc like this, under brutal braking, is likely to break and cause a serious accident.
@akrocuba Жыл бұрын
I must say all that being said, no one here in America would work like that anymore. People are too spoiled. These people seem like that have to do what they have to do. Hopefully the vehicles these brakes are going travel slow.
@stefanpopescu6479 Жыл бұрын
@@akrocuba it's not that people are spoiled. I'm a metallurgical engineer and I cast brake discs for mercedes, bearing caps and vibrochen for daewoo. I have some experience
@zazio5535 Жыл бұрын
@@stefanpopescu6479 Exactly what I am thinking. Thought they have kinda arc furnace to melt the cast iron, but then I see the coke pile... Dont think they will blow oxygen into the furnace to reduce some C..
@akrocuba Жыл бұрын
@@stefanpopescu6479 I MEANT NO DISRESPECT AT ALL. I OBVIOSLY KNEW THAT YOU KNEW WHAT YOU WERE TALKING ABOUT. I'M SORRY IF I CAME OFF THAT WAY. I just see soo many people now in America that are simply lazy and living off the government. What those guys are doing is hard work and I'm guessing long days with no safety equipment. In America I can tell you that people are extremely spoiled. They complain about nonsense. If they had to work like that OR hunt for their own food, no one would be "offended" and no one would be "protesting" instead of working. I grew up poor like many others but worked hard to get where I'm at and then to see people get free everything and they never paid into any system, it pisses me off!! Again, no disrespect was intended.
@stefanpopescu6479 Жыл бұрын
@@akrocuba keep calm, i agree with you. I wasn't born rich either. I have not received anything from the government, I am annoyed by those who receive money without working 🙋
@markbousema7101 Жыл бұрын
I was relieved that once they started working with the molten metal they put their sandals on.
@quietobserver46362 ай бұрын
Safety first!
@williamharris59572 ай бұрын
😂
@itsjustcalledcamping2 ай бұрын
you spelt safety slippers wrong lmao
@daijoubu45292 ай бұрын
Safety sandals
@taco2k32 ай бұрын
Steel toed
@rickn.7298Ай бұрын
We can all agree that these probably arent the best made rotors, but taking in consideration of the primitive work environment, tools, and methods and all with no PPE whatsoever, that's pretty damn impressive! My hats off these skilled hardworking men.
@CupidStunttz4 ай бұрын
When your buddy says "You can get them cheaper" off eBay.... 😂🤦
@tanveerahmedvirk33153 ай бұрын
😂
@MyPrimeone11 ай бұрын
I see where autozone is buying aftermarket rotors 😂😊
@Greenpeace465 Жыл бұрын
man ...my back hurts just watching these guys
@brandonfernandez69529 ай бұрын
Damn.... I'll never complain about my job again.
@glennpupino48902 ай бұрын
Poor guy with the sledgehammer probably has dreams about shredders at night
@arbiewolfe3027 Жыл бұрын
And I'll bet they could also make engine blocks from old brake rotors
@mobeasley545411 ай бұрын
Next episode 😂
@tayloralvidrez434211 ай бұрын
Fuck yeah they can. They can turn old shoes into engine blocks. Why do you think they aren't wearing any?
@user-br9ub1be3p4 ай бұрын
😂😂😂
@yanceyboyz2 ай бұрын
Probably do considering the failure rate of jaguar land rover engines 😂
@rodrigocoronadasilva7729 Жыл бұрын
The concern with the safety of these workers, is really impressive
@Mitzoplick Жыл бұрын
What do you mean? They have their safety sandals on!
@sticustom Жыл бұрын
Imagine their lungs? What’s the average age before they die? Mid 40s?
@captainfancypants4933 Жыл бұрын
@@sticustom how do you guys think america was built? These dudes are doing it the way that it was done back in the day when men were men. Now it's always QQing about safety and osha and blah blah blah. This world would not have been built with you at the helm
@marty2872 Жыл бұрын
@@captainfancypants4933 just because that was then doesn't mean it needs to be now. We've learned better ways along the way- that's called progress.
@sticustom Жыл бұрын
@@captainfancypants4933 yes that’s the way it WAS done until they discovered the side effects of silicosis, asbestos in the lungs, chemical carcinogens, etc that shortened a persons life by decades. The average age of people was in the fourties’ back then, today it’s nearly 80. So you think in todays world people shouldn’t have protective equipment to prevent injuries that occur immediately or diseases that take decades to slowly kill you? These people have the rights to live a long life, not died prematurely just so the wallets of their employers get fat.
@troythegardener6 ай бұрын
I worked on a project in a foundry for a few weeks in the US and the guys pouring the metal had the equivalent of space suits on the entire time and 10s of thousands of dollars of PPE. Seeing these guys do it in barefeet is insane!
@lao5456k6 ай бұрын
В металлургии без средств защиты работали в 15,16,17,18,19 веке
@1marcelfilms6 ай бұрын
guy gets hurt in US: massive lawsuit guy get hurt there: he gets fired
@Mr-vn2gg6 ай бұрын
Si no los mata el trabajo los mata la comida la india es una locura
@jonnysnipes31235 ай бұрын
its their culture. they don’t believe in sketchers nike or addias
@montestu55025 ай бұрын
I guess you don’t need the PPE!
@johnwilburn6 ай бұрын
Four things I can’t get over about this: 1) how much it reminds me of Indiana Jones and the Temple of Doom 2) that they wear sandals doing this kind of work 3) that they paint the cooing fins inside and 4). That there are engine blocks they actually scrap and don’t repair.
@MrBertmsk Жыл бұрын
Представляете насколько должен быть ушатан блок цилиндров, что умельцы из соседнего гаражного сервиса не взялись за его "восстановление"?
@user-xu6or9dz6i Жыл бұрын
Как же тяжело они живут
@commentator979 Жыл бұрын
Либо люто поведенные, либо огромное кол-во микротрещин когда варить уже бессмысленно
@darthvader6108 Жыл бұрын
А тем более индусы.
@Vanchesster Жыл бұрын
да это все мелочи, вот бы так наш русский брат работал бы на автовазе, эт ж все ручная работа не автоматизированная, знать бы кто их поставщик, понятно что из двс траков, все бы автолюбители переехали на этого производителя!
@Igor-us5em Жыл бұрын
меня больше всего пугает ,что тормозные колодки делают из сплавов алюминия, блоки же алюминиевые.
@wurstwasser6567 Жыл бұрын
The guy with the hammer knows every end of the day what he has done. And in the next morning he still knows it. That is a back breaking job
@BGTech1 Жыл бұрын
Very very bad arthritis
@ray24051 Жыл бұрын
You got to love the guy who has the job of just flipping the engine block over for him Lol.
@HowtoMakeThings11 ай бұрын
The Supervisor stood watching him, flipping the block occasionally has got it hardest.
@swaldron555811 ай бұрын
Like Victoria prison.
@khizarshah10098 ай бұрын
They are used tooo...they seemed thin but they are strong and tough
@MrOGWalk4 ай бұрын
Nice brakes. God bless the driver's.
@user-iw6xv8ms2i5 ай бұрын
Теперь понятно, почему гаечный ключи made in India расходятся, когда пытаешься затянуть обычный болт на 6
@user-fu9xu4zy6d5 ай бұрын
Это не Индия, Пакистан кажется
@user-iw6xv8ms2i5 ай бұрын
@@user-fu9xu4zy6d хрен редьки не слаще
@ButtSnorkler900010 ай бұрын
That’s crazy I didn’t expect him to literally split the engine by hand
@SirMo5 ай бұрын
And not even wearing gloves or safety glasses. I mean imagine one of those block splinter and send shrapnel flying back towards him. Crazy.
@juanreyes6955Ай бұрын
Yeah they’re some hardworking people for shit conditions
@PonosCherezNos7 ай бұрын
Когда в сервисе говорят: "Есть оригинальные диски, а есть подешевле"😂
@user-uw3dq1ho9m4 ай бұрын
Оригинал - черные, красные подешевле 😂😂😂
@mnixon3592 ай бұрын
Many years ago I used to sledgehammer engine blocks, cylinder heads and other gray cast pieces, into certain sizes, because broken up cast paid more. These guys work very hard to achieve this. I have much respect for them, as well as their sore arms and shoulders, at the end of the day.
@mike4402 Жыл бұрын
Using one of the most sophisticated highly regulated pieces of steel and turning it into low quality cast iron and milling it to look like a brake disc takes some serious skill. Best part is most people don't know they're being scammed and think they're getting a real break disk when you are just getting a shiny chunk of iron.
@clarencefoster7689 Жыл бұрын
Not much different than what we get on new stuff
@ray24051 Жыл бұрын
Then you'll love the video of them making passenger buses just with tack welds Lol.
@andrewb9893 Жыл бұрын
I work at a chrysler dealership and let me tell you man we recycle our scrap metal and it goes to china where they do the same thing just on a higher scale. Then people go to their dealer for peace of mind and oem quality but you’re actually getting Chineseium garbage. The whole world is like this in a nutshell. Make it as cheap as possible tell no one and charge a ridiculous amount.
@FedkaSlovanich Жыл бұрын
@@clarencefoster7689i still have the factory rotors on my 1995 tahoe, they only lost 2 thousands of a inch in 290k miles, forged steel rotors that my files cant even scratch
@RobBradshawG11 ай бұрын
"break" disk is correct 😂
@borayurt6611 ай бұрын
Great quality control there! If the final guy goes thumbs up, it has passed.
@ruuusaki5 ай бұрын
LOL
@ROGER20953 ай бұрын
When your 18-wheel truck, carrying propane, is barreling down a long, winding, steep hill, with crumbling pavement, in the driving rain, you'll be grateful that your brakes passed their inspection!
@off2u4ea993 ай бұрын
India can make advanced engine components, but not shoes?
@sebrura2 ай бұрын
😄
@Munchstars272 күн бұрын
@@off2u4ea99s Pakistan, ask them
@Dirtbiker-guy2 ай бұрын
Glad to see them take every practical safety measure to guarantee a long happy life.
@pavelsemenov31997 ай бұрын
о, а вот и официальный поставщик сборочной линии Lada ))))
@AlexeiMordor2 ай бұрын
Ниппон вообщето, коробка даже запечатлена, где чел зенковкой занимается
@pomastein2 ай бұрын
ты чё:? это оригинал БМВ
@sergeygta4pony Жыл бұрын
in theory , the engine block needs to be washed , heated , and then molded into a mold for baking blanks , for casting . and so , you will have a lot of impurities with dirt . and impurities in cast iron create voids and cavities , violating the strength of the casting .
@JoseMartinez-ll7vo Жыл бұрын
In theory these aren't going into space..
@ExGemini Жыл бұрын
I'm afraid that impurities are not of any concern where this breaks will be deployed.
@shawnsatterlee6035 Жыл бұрын
Go go Google! In theory that is 🤣
@shawnsatterlee6035 Жыл бұрын
One person on here can't even type proper English! But we is smarter, we knows it all 😂😂
@12mak Жыл бұрын
@@shawnsatterlee6035 He's not wrong though
@Greasyfingers60 Жыл бұрын
I think I counted 10 fingers and 10 toes on everyone. Great job working safely today, team!
@shaulbenshimon6463 Жыл бұрын
These are newbies. The others went upstairs. 👼
@xrjockey86 Жыл бұрын
But they all had at least 6 fingers and 6 toes on each hand and foot before.
@a.alphbond9003 Жыл бұрын
The workers who lost fingers and toes were replace the day after they lost them.
@clarencefoster7689 Жыл бұрын
sometimes safety equipment makes you careless
@theasim37572 ай бұрын
The man is urinating casually at 3:00
@michaelj.richardsАй бұрын
Funny
@rkarins38252 ай бұрын
The non-existent level of quality assurance they put into their product and processes was impressive.
@user-bf7ld9vv8k Жыл бұрын
Страшно что этот продукт попадает на прилавки , и продаётся как оригинальная запчасти
@stvossen9608 Жыл бұрын
Ну то что будут продавать по цене оригинала это да, но если все допуски про проточке соблюдены, внутри детали нет полых мест, тогда запчасть неплоха.
@user-yp9ep5mz8k Жыл бұрын
@@stvossen9608 Ты видел момент балансировки диска?
@user-cu4tm3xl9z Жыл бұрын
Тормозной диск из алюминия?
@serjserjinio4300 Жыл бұрын
@@user-cu4tm3xl9z похоже это не алюминиевые блоки, а старые чугунные.
@user-cu4tm3xl9z Жыл бұрын
@@serjserjinio4300 с виду вроде алюминий.
@i.d.6492 Жыл бұрын
When you don't feel like going to work, remember there are these guys doing hard work
@mauriceboykin4422 Жыл бұрын
Look ma no toes
@alejandro593011 ай бұрын
Y cuando tengas afán, recuerda los frenos de disco Made India 😂
@karraanverma581110 ай бұрын
@@alejandro5930 Its Pakistani made
@jonathans45037 ай бұрын
If I don't feel like going to work, I don't care what other people are doing. I just don't go. If I put myself in everyone's shoes, I'd be too depressed. I do what's good for me.
@aug.jam.16 ай бұрын
@@jonathans4503 couldn´t have said it any better! Totally agree
@G.Maximus_MBChB10 ай бұрын
I really like how they all have their helmets, safety boots and goggles on. Great work☺️
@handy2408 ай бұрын
Typical selfish first world thinking. Helmets, boots, goggles are costs. Get a paying customer first
@zheka_shevelev4 ай бұрын
Их 509 миллиардов. Если что пойдет не так, другого найдут
@oo0Spyder0ooАй бұрын
Yeah yeah we read the same shit on all these vids, it’s getting old. They want or need to work the way they do shouldn’t bother you. Before you had better conditions your ancestors did it tougher too, get over yourself.
@GNXClone27 күн бұрын
It nice to see proper use of the words “break” and “brake”. That doesn’t happen much nowadays.
@TheMrshaally Жыл бұрын
Amazing street level skills...safety is definitely not on the agenda for these overworked and guaranteed underpaid workers.
@shawnsatterlee6035 Жыл бұрын
It's their culture. Iam sure they laugh at u sucking down fast food sitting on ur ass doing nothing as u judge others. Least they have work ethics!
@silvercloud6370 Жыл бұрын
Well they simply have no choice. At least they getting food on the table to their families
@Salman_Saho Жыл бұрын
At least they know what a woman is
@borayurt6611 ай бұрын
They are scammers.
@TheMrSkyshark11 ай бұрын
@@borayurt66chill out they're not Indians
@user-ci6ci4gs5q5 ай бұрын
Я не специалист в металлообработке, но наверное отверстия под шпильки/болты стоит позиционировать относительно центрального отверстия, а не поддерживаемого в одной точке рукой трафарета. Бедность это страшно.
@AlexVLD882 ай бұрын
балансировка этого дерьма, покинула чат вместе с координатным станком
@user-wc7ul7wk9n2 ай бұрын
Нормально!!!
@OlegBulatov2 ай бұрын
Там у оправки есть проточка кольцевая. Она садится на внешний обод. Биение остается лишь на внутреннем отверстии - в данном видео не показана обработка ступичного отверстия. А все остальные кромки они обточили на станке. Не разделяю ужаса англоязычных комментаторов по поводу рецептуры. Мы не видели весь процесс варки, поэтому не можем судить о качестве. Думаю, рецептура соблюдена.
@ShpricendrosselАй бұрын
@@OlegBulatovбалансировки диска мы тоже не видели и подозреваю что её просто не делают.
@cyrusthegreat30812 ай бұрын
Hats off to all those hard working people! I will not lost 5 mins in this working condition.
@nismo2070 Жыл бұрын
I'm in the US. The quality of aftermarket parts here has taken a nosedive the last few years. It's frustrating to get warped rotors right out of the unlabeled white boxes they all seem to come in now. It makes sense after seeing this.
@tomstiel7576 Жыл бұрын
coming to a Auto Zone near you soon,,,,talk about third world,,,no wonder everybody trying to jump the fence to get in to the racist country of the USA,,,sarcasm intended
@cobus8586 Жыл бұрын
I doubt they export to US
@glock21guy Жыл бұрын
A couple years ago, I put new drums on my '70 C-10. Still had the originals (at least in the front). I should have left them on there. Even though they weren't in great shape, they didn't pulsate like the brand new ones. The prices have gone up, the quality down.
@tomstiel7576 Жыл бұрын
@@cobus8586 don't be so sure
@eddjordan2399 Жыл бұрын
China is among the world's largest suppliers of car parts, exporting motor vehicle parts and accessories worth $34.8 billion in 2018 to USA.
@MICHAEL-ys3pu Жыл бұрын
The discs actually look pretty good but I would not trust them on anything more than a wheelbarrow.
@bryanlatimer-davies1222 Жыл бұрын
And guaranteed to be almost round and sort of fit on the studs
@guesswho6038 Жыл бұрын
@@bryanlatimer-davies1222 At least they do the braking job most of the time, soon at your local parts dealer.
@khizarshah10098 ай бұрын
These workers are Pakistani and believe me there work are 💯💪 better they do alot of hard work...skilled worked is 10 time better then machine work and more expensive..still these guys are paid poorly...I'm not forcing you but ...I knw there work I'm local...no accidents have been reported..
@MarvinHartmann4524 ай бұрын
@@khizarshah1009Yeah we see that paskistani street workers are the leading tech of the world...
@pskbae3 ай бұрын
Disc-shaped object.
@user-gj7fx6hn6v Жыл бұрын
Бетономешалка у них вообще огонь , задний мост с редуктором 👍
@DetailEnthusiast9 ай бұрын
Impressive! Imagine having the tedious task of all. Bagging at the end 😂
@likebeatzztv74855 ай бұрын
official brembo factory 🤣
@novadf10 Жыл бұрын
Those people are working very hard to Winn a bread 😓respect and salute to all of you ❤
@SevenSixTwo2012 Жыл бұрын
If they were in the USA, they could also loot a Nike or Apple store. According to Democrats, that counts as "winning bread" too. 🤔
@julio43988 Жыл бұрын
Trabalhar numa fundição descalço sem proteção nenhuma isso é escravidão, povo sofre😢
@thetruejay20 Жыл бұрын
It's an act for the video
@khizarshah10098 ай бұрын
@@thetruejay20 I'm from Pak believe me it's not act our labour are very skilled and hardwork we even built our own weapons..it's better then and 💯 like original the problems are the equipments..and poorty
@obfuscated309011 ай бұрын
That right angle gearbox for the sand mixer made from a truck axle is slickly done. It's an old idea that works.
@parsecgilly14955 ай бұрын
safety shoes, gloves and protective glasses, yes, everything is up to standard!!! :))))
@lmeza1983Ай бұрын
I think this is how people used to work back in the 1800s but wooden workbenches were already inverted back then, crazy.
@user-mm8yv8bh9d Жыл бұрын
Хотелось бы увидеть фирму упаковки в которой они будут продаваться
5 лет назад я запасался пивом и безудержно смеялся под эти видео пакистанские, 2 года назад лишь слегка улыбался без пива, сейчас смотрю и думаю какой стартап замутить в гараже))
@ripme21 Жыл бұрын
Открой там мини бар.
@sardaukar64785 ай бұрын
Увы это наше будущее 😢
@user-uw3dq1ho9m4 ай бұрын
Клуб гаражных алкоголиков
@hansolops12874 ай бұрын
@@sardaukar6478 ваща будущее это алкоголь
@user-wc7ul7wk9n2 ай бұрын
@@hansolops1287алкоголь? Мне два!
@rdr6666Ай бұрын
I really dug the truck differential adapted to drive the sand mixer
@eduardonoya62027 ай бұрын
Uma indústria artesanal, fabricando peças paralelas, mas com trabalhadores dedicados (e descalços).
@TheGuruStud Жыл бұрын
Not a single person of the over 1 billion total in any of these countries has heard of a work table! Amazing.
@Mk-cd8fn Жыл бұрын
Money is the problem and u are faster with this method
@darrylhaynes9208 Жыл бұрын
Where do you think the metal for there furnace came from
@TheGuruStud Жыл бұрын
@@Mk-cd8fn having a locked up back after a couple weeks isn't going to make you faster lol
@ronbelanger411311 ай бұрын
Show us all your ignorance without say it directly.
@buckmurdock250011 ай бұрын
@@TheGuruStud then you will be replace by one of the other 1000 looking for a job.
@NevskyKsandr10 ай бұрын
14:54 отличные диски, ещё никто не возвращался с претензиями😅 good discs, no one has come back with complaints yet😅
@aizhanabzhappar91088 ай бұрын
👍😂😂😂👍 !
@christiang.94852 ай бұрын
Ja klar, weil alle wo sich über die Bremsscheiben beschweren könnten, vermutlich vom Bestatter gesegnet und begraben wurden - auch eine Art von "Geschäft ohne Reklamationskunden"
@windowsxpprofessional2 ай бұрын
Because they all died
@KrustyKlown7 ай бұрын
That $39 Ebay disk rotor you bought this Summer, came from these guys.
@jacobs38835 ай бұрын
These people are really hard workers. I'm impressed.
@user-hs6hp1rz6u Жыл бұрын
Можно вечно смотреть на воду, огонь и парня с кувалдой😂
@MrMolox1984 Жыл бұрын
Надо им подсказать если насверлить перфорацию, то ценник в два раза поднимать можно + упаковку с брендом типа brembo
@SashaRio Жыл бұрын
Тебе такие и продают😂
@sardaukar64785 ай бұрын
Технологии АвтоВАЗа судя по качеству
@lashalasha34814 ай бұрын
На порядок лучше автоЗаЗа :D
@retorq3 ай бұрын
That first part looks like fun!!
@finding_beauty_for_youАй бұрын
Mad respect for the work they are doing!
@jacksonpuckett6115 Жыл бұрын
As a diesel mechanic I can promise you these are rotors for a much smaller application such as a passenger car or similar. Brake rotors for semi trucks and class 8 vehicles are much larger, heavier, and typically BOLT on to a hub using 10-12 bolts. Not the little countersunk holes you see here which are typically annoying little phillips head screws.
@eternalbeing3339 Жыл бұрын
No those look like half ton dodge rotors. Dana 44 axle, those are 5 lug, 3/4 and 1 ton are 8.
@Jeremy-iv9bc6 ай бұрын
Yeah no shit Sherlock. Was your first clue that they’re tiny?
@jacksonpuckett61156 ай бұрын
@@Jeremy-iv9bc read the title.
@jimseviltwin1 Жыл бұрын
Definitely gives you some insight as to how powerful a thrown piston rod can be to break through the walls of an engine block!
@MrActionPL1 Жыл бұрын
Not exactly, broken piston rod often hits weakest part of block
@thatbluefa5913 Жыл бұрын
@@MrActionPL1 He hit that spot at 0:42 lol
@shawnsatterlee6035 Жыл бұрын
@@MrActionPL1 yeah because the rod knows exactly where that spot is huh? Sorta like on ur wife who will say differently as well 🤣
@MrActionPL1 Жыл бұрын
@@shawnsatterlee6035 I've blown up about 14 engines building big turbo's projects and mostly rod knocks everywhere inside block, but makes a hole in weakest spot , then in most cases rod snap in half or if like my engines rods are forged, engine is seized
@roscoedickhertz894710 ай бұрын
They were cast aluminum blocks that they melted down to make brake rotors... Let that sink in.
@rangermiller99692 ай бұрын
I really like the safety shoes! Nice design.
@tomassamel8880Ай бұрын
Great hard working people! Wish you all the best.
@Lau9hin9man Жыл бұрын
А наши то токаря говорят что диск нужно на одной посадке протачивать 😅
Тоже об этом подумал. Соцзащита у них наверняка на высоте.
@user-wf4bg6ji5d3 ай бұрын
Ну погиб один на работе тут же другого возьмут их же мильярды 😮
@screwsnutsandbolts9 ай бұрын
Excellent videos 👍
@donaldbaker69616 ай бұрын
Wow 🤩 amazing work
@rkgaustin9043 Жыл бұрын
Guy operating a giant gas torch barefoot. Guys handling molten metal wearing sandals. Guy operating a lathe wearing a loose billowing long sleeve shirt. Nobody wearing any safety equipment or gloves while handling toxic liquids, breathing toxic particulate, and spray fumes. This video has it all!
@BMW18M310 ай бұрын
I didn't know there were that many safety violations. You counted them all. Good job 😅
@thechosenone84669 ай бұрын
There is a guy wearing one glove while drilling
@TomuchLogic-ko8bz9 ай бұрын
There Jerusalem joggers aren't steel toed 😅
@SirMo5 ай бұрын
That makeshift door they used to close that area where they were heating disk inserts was also probably made from Asbestos lol.
@EricVandenAkker5 ай бұрын
not that I'd ever expect to see safety glasses or steel toe boots, but that guy sledgehammering engine blocks is on borrowed time.
@dropt6051 Жыл бұрын
I used to work here, don't let the video deceive you. we had great benefits, paid holidays, weekends off and even better employee discounts. the yearly bonuses were also very rewarding. we only worked 4hr shifts 4 days a week.
@szymoniak75 Жыл бұрын
Don't forget remote work
@davidhenderson77222 ай бұрын
Seriously how talented are these guys. 😮
@robmanuel6793Ай бұрын
Those steel toed slippers really worked 😂!
@the_even_toed_ungulate. Жыл бұрын
Love all the safety equipment, especially the steel toe cap sandals.
@rkgaustin9043 Жыл бұрын
This video has nearly every OSHA violation.
@serbtesla Жыл бұрын
I would bleed out 1st day at work.
@shawnsatterlee6035 Жыл бұрын
@@serbtesla probably because ur distracted by bright shiny objects.
@onepalproductions Жыл бұрын
@@shawnsatterlee6035 lmao😅
@swaldron555811 ай бұрын
Fantastic health and safety footwear!
@m1geo Жыл бұрын
Good to see he's got his safety slippers on while swinging the sledge hammer at an engine block casting. 😮
@homeroaguilar6163 Жыл бұрын
The safety laws in the USA make brainless people
@petercozzaglio6070 Жыл бұрын
Don’t know why your last name is Smart, because you’re not very smart. In many developing countries shoes are very expensive compared to the wage . And in countries that are very humid like the South Pacific, shoes can easily and quickly develop foot fungus.
@TrippinBusa Жыл бұрын
Safety squints too
@alpinlt769 Жыл бұрын
Safety first.
@m1geo Жыл бұрын
@@alpinlt769 safety third*
@user-bf7ld9vv8k Жыл бұрын
Те что не смогут раздолбить, заварят электродом и в машину собирать будут 🤣
@Alexandr-ss5hy2 ай бұрын
Точно. Это у них сортировка-что на переплав, а что на востановление блоков
@peterdebrie4 ай бұрын
Good thing they wearing safety sandals. (Found it in another post but still funny)
@yourfactstory2 ай бұрын
Wow ! incredible !! Nice work friends!
@perropulgoso335111 ай бұрын
Glad to see them taking all the necessary safety precautions 😢
@Hotrodford10 ай бұрын
OSHA would love them
@Hotrodford10 ай бұрын
This is how America will be in about twenty years
@superduder Жыл бұрын
Limited equipment yet very skilled workers. Great job.
@frankl54 Жыл бұрын
Limited equipment? I think it is a whole lot of stuff required for 1 product :)
@tolikalonso4 ай бұрын
Пакистан до сих пор не летает в космос только потому, что у этих ребят нет чертежа ракеты...
@J4nus014 ай бұрын
respect for those workers ! High ingeniousity to recycle old engine block
@devurandom2019 Жыл бұрын
Big thumbs up to the worker @ 14:56. Nice work !
@sergey_sovetsky Жыл бұрын
Finally we can see how ventilated rotors are made.
@sergeygoculenko Жыл бұрын
Тормозные диски.
@onesikm3 Жыл бұрын
Don’t forget to mention! The speciality coating at the end 🎨😂💀
@mhitec2 ай бұрын
What a job...well done guys 👍
@adnanshuja4075 Жыл бұрын
They are doing Hard work with Good Skill, I have not seen any where that they were cautious and care full about the Chemical Composition and Other Properties of Material as per Duty of the Component since the Part is highly responsible for safety and operation of an Auto Motive Vehicle such part failure can lead to Road Accident with various Lives to End. Any How the Process of Breaking an Engine Block is much technical and impressive.
@FrankBenlin Жыл бұрын
Very good work. Thank you.
@sofjen6 ай бұрын
These are tough man, much respect.
@civireeja6 ай бұрын
How the worker hammering.Hard job😮
@aleksandr4626 Жыл бұрын
Парни настолько верят в свои станки что могут позволить себе перевернуть диск чтобы с другой стороны проточить.
@serjptz3650 Жыл бұрын
Парни настолько верят в свои станки что могут позволить себе класть ветошь прямо на резцедержатель)
@helensisikoff10 ай бұрын
И что в этом такого?
@ne_skazhu_nikomu Жыл бұрын
Смогли освоить довольно сложное производство, но при этом не смогли сделать сдвижную дверь в печи? Приставляют кусок железа и подпирают палкой
@user-sh2tm8vx9j Жыл бұрын
Ну так работает ведь
@sardaukar64785 ай бұрын
Санкции нам не вредят да? 😂
@ne_skazhu_nikomu5 ай бұрын
@@sardaukar6478 ваще пофиг на санкции
@user-uw3dq1ho9m4 ай бұрын
@@ne_skazhu_nikomu"ваще пофиг на санкции" кричал окровавленный водитель летящий через лобовуху тазика с пакистанскими запчастями 😂😂😂
@user-mt6cc9vo7j5 ай бұрын
No safety gears. Just hard working. Respected!
@zakariajaya75704 ай бұрын
Please share, what are you use for a binder in core making. Is it silica gel or something else
@eternalbeing3339 Жыл бұрын
No scamming in a call center, just honest hard work here. I like it.
@b44rt10 ай бұрын
No they are actually making fake brake disc's that will break when braking hard. India is the land of scammers, but they cannot help it they are just simple minds.
@loveforallhatredfornone18889 ай бұрын
This is Pakistan lol
@b44rt9 ай бұрын
@@loveforallhatredfornone1888 India and Pakistan are the same.
@arjunraj8238 ай бұрын
@@b44rtlol India has more advanced industries than Pak. 😂
@ananthuskumar12868 ай бұрын
Better than ka boom ing
@ssss-df5qz Жыл бұрын
"How off centre do you want the casting?" "YES!"
@Legendz167 Жыл бұрын
Boooo
@Tearflavoredcereal11 ай бұрын
I’m dying 🤣🤣🤣🤣🤣
@maximusmeridius12409 ай бұрын
Great workmanship
@dodgedriver9720Ай бұрын
This is a great idea 💡
@donaldgreathouse6611 Жыл бұрын
Hard working men. Very good job!
@fastback777ray Жыл бұрын
Amazing skill. Such hard working people
@PH-md8xp7 ай бұрын
So what brand of brake disks are they making these for? Hope they aren’t Brembo’s, cause I just paid an arm and a leg for a new set for my X3.
@user-cc3zy6gj2d7 ай бұрын
🔥🔥🔥super work 🔥🔥🔥👍👍👍👍👍
@user-fz3mx7po4j10 ай бұрын
Когда мне будет казаться, что я устал, работая за компом, буду включать это видео))
@1182482 ай бұрын
Exactly my thought. People complain about their quality, but its hard work and a good skill. I respect these men
@vitvit132 ай бұрын
@@118248 what good skill about it? its a pure garbage brake discs, there is too many impurities.
@eugeniosouza66336 ай бұрын
Very good! 👏👏👏👏
@yuwaretphasuk67013 ай бұрын
Hard work ....appreciate them.
@Dmb.577 Жыл бұрын
Каменный век. Смотреть страшно
@krokodil_kaban4ik Жыл бұрын
Прикинь если в глаз кусок отлетит
@masters_of_Kherson Жыл бұрын
@@krokodil_kaban4ik Та это мелочи! А если с ковша на ноги прольётся металл? Они редко до 40 доживают..
@krokodil_kaban4ik Жыл бұрын
@@masters_of_Kherson ноги просто шире ставить и ничего не прольется
@sardaukar64785 ай бұрын
Последствия санкций, это наше будущее братцы
@emojiemoji77252 ай бұрын
все як у тебе в рашкістані
@user-ed7xe2zc7t Жыл бұрын
Покрасить чтобы потом ещё раз обточить, гениально!🤣
@user-qt7rw3of9l Жыл бұрын
Красится чтобы увидеть нарушение геометрии. В школу вообще ходил?
@user-bz1iu6qw2y Жыл бұрын
Покрасили перед уточнение размеров. Не надо после клеить чтоб не засрать поверхность при покраски
@aizhanabzhappar91088 ай бұрын
В общем в школу ходил !
@barabashka48378 ай бұрын
@@user-qt7rw3of9l Учитывая общий пиздец происходящего,думаю как раз таки по тупости =))) О каких то там технология обработки метала,В том числе и термической,эти ребята не слыхали даже.Да что там,они в сланцах раскаленный метал в форму заготовки заливают =)
@k-a-z-a-c-h-o-k4 ай бұрын
Не фиг геометрию нарушать изначально.@@user-qt7rw3of9l