Dismounting / removing bearings with simatool Ball Bearing Puller BP61

The internal #extractor for #bearings
The #bearing extractor enables the removal of deep groove #ball bearings. The shaft does not have to be removed - a significant advantage.
■ For shaft diameters measuring from 10 to 100 mm
■ The kit includes 2 spindles, 6 sets of puller arms, 1 counter bracket
■ Compact toolset includes a selection table in a handy case
High-quality tools for #mounting and #dismounting bearings and seals #simatool products enable the fast installation and removal of roller bearings and radial shaft seals. All over the world, they are
successfully used in the machine industry, #maintenance workshops and almost all other industries. simatool products can be used to rapidly, precisely and reliably complete installation and removal work without damaging neighbouring machine elements.
simatec.com/pro...
simalube

[@simatecSwitzerland]

Price requests: Indonesia: PT.Interwira Lancar, www.interlam.co.id India: Nitex Enterprises, www.nitexindia.com/simatools.htm USA: simatec inc., www.simatec.com

[@simatecSwitzerland]

All simatec distributors around the world you find under: simatec.com/distribution/

[@simatecSwitzerland]

Thank you for your request. Please find following our distributor in Indonesia: PT.Interwira Lancar, www.interlam.co.id

[@ИванКолегов-о2ы]

Классный инструмент.Респект и уважуха тем кто придумывает такие вещи.

[@simatecproalterbelement1774]

Иван, обращайтесь. В нашем арсенале достаточно решений, чтобы облегчить и усовершенствовать процесс обслуживания подшипников. www.simatec.pro | [e-mail] | [phone]

[@zosimoomamalin2848]

How can we order this dismounting removing bearing

[@simatecSwitzerland]

Dear Zosimo Omamalin, Please check our website under Distribution and find a distributor in your country. Then you can place your request there. Is that OK? Thank you very much. simatec.com/distribution/ Best regards, simatec ag

[@joanlim8945]

Please send the link where to buy... thanks

[@simatecSwitzerland]

Dear Joan, please have a look on the following link with our distributors: simatec.com/distribution/ Very best regards, simatec ag

[@pashaosipov3215]

В детсве что то похожее изготавливали для снятия подшипника с колечатого вала мопеда. на двух болтах стачивали шляпки с двух противоположных сторон, в толстой пластине три отверстия с резьбой, крайние под обточенные болты, среднее под винт, обточенные шляпки вставляешь между обоймами подшипника, поворачиваеш на 90° и вуаля, съемник в действии. Может кому поможет.

[@simatecSwitzerland]

Dear Mr. Pasha Osipov, Please contact our distributor from Russia. I am sure, that he will help you. Альтер Би Элемент ООО Tel.: [phone] [e-mail] www.simatec.pro

[@simatecSwitzerland]

simatec.pro/kontakty.html

[@pashaosipov3215]

simatecSwitzerland Спасибо, не нуждаюсь сейчас в данной продукции. Это больше подходит для производства, или большого сервис центра. Вашей компонии желаю дальнейшего развития.

[@ruslantkachenko3799]

Сейчас предложат вам работу. Может вы ещё что-то знаете. )))

[@RaviKumar-xs9ep]

Hello sir, I am from India we want to remove 6320zz bearing from shave pulleys so which type of puller we need? And where it is available

[@simatecSwitzerland]

Dear Sir, please have a look on our website. There you find our distributors from India: simatec.com/distribution/ Please contact them. Many thanks and kind regards, simatec ag

[@joshuajoykutty6650]

@@simatecSwitzerlandonly America is available in 'select continent' option.No Asia or India

[@Zhienbaev]

Первый раз вижу такой инструмент. Вещь.

[@simatecSwitzerland]

Please find more information on: simatec.pro/simatool.html

[@hanifmaulana4973]

Harga brp gan? Ini sangat membantu buat reparasi vespa sperti pnggnti bearing as roda blkng tnp hrus belah mesin

[@simatecSwitzerland]

Dir Sir, Many thanks for your request. We have two partners in Indonesia. Please have a look on our website: simatec.com/distribution/ Hopefully I could help you. Very best regards, simatec ag

[@MisterXS75]

fantstic!!! do you have one which is small enough to pull out a NMB626s bearings 6x19x6 mm ? thank you

[@simatecSwitzerland]

Hi Sandro. L, Many thanks for contacting us, I’m glad you like the Bearing Puller BP 61. Unfortunately, the simatool BP 61 is not working to dismount a NMB262s, since the shaft diameter is 6mm. The bearing extractor enables the removal of deep groove ball bearings. The tool is for shaft diameters measuring from 10-100 mm. Do not hesitate to contact us if you have further questions. Very kind regards, simatec ag

[@nadiaturner2746]

I need this puller please link me

[@simatecSwitzerland]

Dear Isabella, how can we contact you?

[@농기계수리공]

👍👍👍

[@dunloplego]

Just did a Christmas shutdown and this puller sure would have taken hours of the job. I had to literally pick apart the bearing just so I could pull off the inner race. I’m from Australia, what would be the price for this particular kit? And it would obviously pull out roller bearings also? Where could I purchase this please?

[@simatecSwitzerland]

Dear Dunloplego, Many thanks for your request. Our partner in Australia is Statewide Bearings. Please contact Mr. Darren Johnston on his mail [e-mail] or phone [phone] The website of Statewide Bearings is: www.statewidebearings.com.au

[@simatecSwitzerland]

Watch out: How to mount small bearings: kzbin.info/www/bejne/rWfSpoxoZrmUgac

[@zosimoomamalin2848]

How much?

[@simatecSwitzerland]

Dear Zosimo Omamalin, Please check our website under Distribution and find a distributor in your country. Then you can place your request there. Is that OK? Thank you very much. simatec.com/distribution/ Best regards, simatec ag

[@flouserve]

Este si que me gusta, la de rodamientos "pillados" en sitios similares que he tenido que sacar...que sudores.....se lo voy a enviar a los "míos" a ver si se animan.

[@tuancao946]

Bác nào xách tay về Viet Nam k?co alo e.thanks you

[@matoshreecresingcenter4077]

Sir lifting ka koi tool banavo

[@cityofkaycityofkay3214]

Сразу видно подшипник свежий, даже смазка цвет не поменяла. Хотя идея интересная

[@simatecSwitzerland]

Please find more information on: simatec.pro/

[@genyama714]

special price ! just only $3000 today !! enough ??

[@sujitbachhar1813]

Hallo sir, How to buy this puller?

[@simatecSwitzerland]

Dear Sujit Bachhar, Many thanks for your request. Please find our distributors around the world on our website: simatec.com/distribution/ If you have any further questions, please do not hesitate to contact us! Very kind regards, simatec ag

[@kkwong2218]

Good

[@shristisahu9087]

😍😍😍😍😍

[@chanangmarak1794]

What is this puller name

[@simatecSwitzerland]

Dear Mr. Chanang Marak, The puller's name is: simatool Bearing Puller BP61. Have a look on our website: simatec.com/products/simatool/ Best regards, simatec ag

[@Hasan_OZ]

I wish 1 dolars equals to 1 Turkish lira(current exchange rate is 1 dolar = 5,3 turkish lira) , this is amazing tool

[@ДмитрийКутнов]

А конические подшипники как снимать, не выбивая вместе с валом?

[@simatecSwitzerland]

The BP61 is designed only for deep groove ball bearings. Best regards, simatec ag

[@ThangNguyen-yu9ib]

Bo nay gia bao nhieu

[@simatecSwitzerland]

Please contact our distributor in Vietnam: simatec.com/distribution/ Kind regards, simatec ag

[@sharifhossain8830]

price?

[@sandipchauhan0123456]

सर इस सेट की कीमत क्या है

[@simatecSwitzerland]

Please ask our partner in India: Nitex Enterprises Mr. Nilesh H. Dawda Tel.: [phone]/59 [e-mail] www.nitexindia.com

[@JohnMaffina]

Balls.

[@hannanpakthini7221]

It is the correct method of Ball Bearing removal. Outer race should not be gripped for the removal. otherwise balls would be damaged.

[@dairyautomationwithusman]

How can purchase yr products

[@simatecSwitzerland]

Please have a look to our distributors: simatec.com/distribution-de/

[@BZT-1]

Hi. Do you think this could work on an angular contact bearing?. Application is symilar to the cylinder shown in the video.

[@simatecSwitzerland]

Dear Jose, Unfortunately, our tool does not work with angular bearings. Feel sorry... Have a look on our website, where you find all our maintenance products: simatec.com Very best regards, simatec ag

[@ФеяВолшебная-т4б]

Где можно посмотреть принцип действия автоматического лубрикатора? Очень нужно.

[@กิตติศักดิ์กลาสี]

ในประเทศไทยมีขายมั้ยครับ.

[@simatecSwitzerland]

Dear Sir, Yes, we have a partner in Thailand. Please contact therefore: SIB Bearings Co.Ltd, [e-mail], www.intbearing.com, [phone] If you have any further questions, please contact us. Kind regards, simatec ag

[@tulethanhtu5775]

bo cao bi bao nhieu vi sop

[@mamephecakthawest3516]

Berapa harga tools ini.? Dimana belinya.? Tolong kasih info

[@tuancao946]

Việt Nam có ai bán k nhỉ?

[@ЮрийЮрий-ж3з]

Супер 👍

[@moiarumuranubhuti...6315]

I wanted to order it, I'm from India how can I got sir

[@simatecSwitzerland]

Dear Mr. Changmai Raju, please find following the address from our partner in India: Durga Bearings Pvt Ltd., www.durgabrgs.com They have offices in Mumbai, Bangalore and Chennai. Here the phone number from the office in Chennai: Tel. [phone] Very kind regards from Switzerland, simatec ag

[@moiarumuranubhuti...6315]

thank-you so much sir ,,I will b contact with this address very soon,Wish u have a great day

[@cruzinezy1968]

Great tool, but the price is almost twice what it should be

[@simatecSwitzerland]

Each customer must decide for themselves how valuable their time is.

[@tuancao946]

Việt Nam có ai bán k nhỉ?

[@simatecSwitzerland]

Yes, we have two distributors in Vietnam. Please contact them: Tuanduc Trading & Engineering Co. Ltd. (TDEC), www.tuanduc.com, Mr. Nghiem Xuan Cuong, Mobile: [phone] or BCC Trading Company Limited, www.intbearing.com, Tel: [phone]

[@tuancao946]

simatecSwitzerland Alo you mobile [phone]

[@hienhuynh4693]

o đau ban vay

[@babuollachery6333]

Can pull the sealed bearing?

[@simatecSwitzerland]

Before you pull out the bearing, you have to remove the seal. Let's do that with our special tool the simatool Seal Puller SP50. Have a look to the following movie: kzbin.info/www/bejne/iorOi5-BjritarM Afterwards, you can pull out the bearing with the simatool Bearing Puller BP61. Does my answer help you? Best regards from simatec ag.

[@jeffreyreichert85]

Will this puller remove any brand of ball bearing? Metric or Imperial?

[@simatecSwitzerland]

The tools are designed to remove a range of Metric deep groove ball bearings and their designations are listed in the relevant datasheets. However, bearing size definitions only specify OD, ID and thickness; the groove dimensions and the number and size of balls can and does vary between brands. The tools have various sets of spring-loaded arms that conform to the actual groove dimensions and (like an adjustable spanner) don’t care whether these are defined in Metric or Imperial units. We cannot, however, claim absolute 100 % compatibility with any possible bearing as some combinations of groove depth and ball spacing would fall between the dimensions of one set of arms and the next.

[@bhanupratapsingh1924]

How can remove a bearings?

[@СергейГ-щ7к]

Сколько стоит такой комплект?

[@simatecproalterbelement1774]

Сергей, добрый день. Касательно цены и технических возможностей этого, а также другого инструмента simatool вы можете пообщаться со специалистами в России: www.simatec.pro [e-mail] [phone]

[@ruslantkachenko3799]

Даже на сайте цена не указана, только по запросу! Лучше присесть перед тем как цену узнать. )))

[@edgardogarcia3791]

Sin musica por favor...ya cerrado.

[@bhanupratapsingh1924]

How can remove a zz bearings?

[@simatecSwitzerland]

Very good question, however no problem: First of all you have to remove the seal with the simatool Seal Puller SP50. Have a look to the following movie: kzbin.info/www/bejne/iorOi5-BjritarM And afterwards you are able to use the simatool Ball Bearing Puller BP61.

[@iranalencar5925]

Onde compra

[@simatecSwitzerland]

Por favor, visite nuestra página web en la red mundial de distribuidores: simatec.com/distribucion/ Very kind regards, simatec ag

[@quocdamtg8284]

Bao nhieu 1 bo

[@olegsedov2155]

Да...Эот Вещь!

[@sokolgraf9261]

Говно , если ты так коментируешь , значит мало с этим работал !

[@cahndeso7593]

harganya brapa om.😁

[@ruslantkachenko3799]

Дешевле такой инструмент заказать чтобы сделали на заводе. Стоить в 10 раз будет дешевле, как минимум!

[@simatecproalterbelement1774]

Руслан, опыт работы с заводами показывает, что штучное производство дороже и не учитывает всех необходимых параметров для получения желаемого результата. Тем не менее, если решитесь на кустарное производство, покажите что получилось, будет интересно посмотреть. Ждем Вашего видеоотчета.

[@ruslantkachenko3799]

@@simatecproalterbelement1774 Я не делаю видео отчёты. А опыт мне показывает, что есть такие мастера на заводах, что ваша цена за облачная! Качество не будет хуже вашего. От производителя всегда дешевле. Я не думаю что ваши производители пользуются внеземными технологиями а цены у вас космические. Может в Москве это копейки но страна не ограничивается только столицей. Себестоимость данного инструмента максимум 50 баксов а где-то в глубинке за такие деньги вам сделают и два и три таких комплекта. На эту тему можно много говорить и каждый будет защищать своё болото.

[@maxtigra7834]

@@ruslantkachenko3799 Такую фигню видел делают из клапанов и еще лучше получается

[@proefproef8108]

Ruslan Tkachenko там же целую роту менагеров ещё накормить надо))

[@kondepudivineel150]

How many cost

[@simatecSwitzerland]

Where are you from? Because we have many distributors in different countries. Otherwise you could place an offer by one of our distributors.

[@Wojtekcichy4]

Price is killing... 750$ on amazon xP

[@simatecSwitzerland]

If you can remove all your bearings with a simple puller then we agree, buying our kit makes no sense. BUT if you have worn out bearings mounted e.g. on the output shaft of a gearbox that needs to be dismounted and disassembled so that it can be pushed out from behind, think how much time and money could be saved if you could simply remove it without this extra work. How many times would you have to do this before our kit has paid for itself?

[@yusufmirgoul3541]

fuck it! I will make my own!

[@manekin7520]

Podoba mnie siem

[@_Nguyenluc]

👏

[@TheDjk52]

Тема.

[@rubielbecera9321]

Bbb. Vendo.

[@marcelolimadesouza268]

Sou de São Paulo BRASIL , como faço para comprar este kit de sacadores

[@simatecSwitzerland]

Bom dia Marcelo! Super facil, contactar o nosso representante no Brasil, Eduardo Reis [e-mail]/[phone]. Obrigado

[@surkhabsingh347]

Nice puller ,it's price.

[@simatecSwitzerland]

Where are you from? Because we have many distributors in different countries. Otherwise you could place an offer by one of our distributors.

[@cnkids8914]

Plz send in bp61 how many price

[@simatecSwitzerland]

Please have a look on our website, if you can find a distributor in our country: simatec.com/distribution/ Best regards, simatec ag

[@EngAhmedRashedHVAC]

I like sell one of it . Who have it ?

[@simatecSwitzerland]

Where are you from? We have several distributors around the world who selling our products. Or have a look on our website simatec.com/distribution/ There you find our distributors. Hopefully I could help you. Best regards, simatec

[@simatecSwitzerland]

How do you dismount bearings? Which tools are you using?

[@simatecSwitzerland]

@Paijo kaka No Problem. Please visit our website "Distribution" and search for your local simatec partner in your country. simatec.com/distribution-de/ Kind regards, simatec ag

[@NPCha177]

Keren.,

[@agussofyan9751]

Where i can get this tool..? And how much ?

[@simatecSwitzerland]

Dear Agus Sofyan, please have a look on our website, which distributor we have in your country. Please click on the following link: simatec.com/distribution/ Very best regards, simatec ag, Switzerland

[@tuanngovan3933]

E đang cần mua loại này

[@simatecSwitzerland]

You can buy it at the company: Tuanduc Trading & Engineering Co. Ltd. (TDEC) www.tuanduc.com

[@fortunatoleon127]

hola me gustaria saber si lo puedo conseguir en chile muchas gracias

[@simatecSwitzerland]

Sí, pero seguro. Por favor, póngase en contacto con el Sr. Daniel Manriquez: [e-mail] [phone]

[@ilmannurkamal2334]

And how to install?

[@simatecSwitzerland]

The simatool BP61 is for removing grooved ball bearings efficiently from shafts and cases without dismounting the bearing. This ideal tool assortment is suitable for bearing sizes from 10 to 100 mm bore diameter. Best regards, simatec ag

[@zainkhan7477]

Price

[@simatecSwitzerland]

Where are you from? We have several distributors around the world who selling our products. Or have a look on our website simatec.com/distribution/ There you find our distributors. Hopefully I could help you. Best regards, simatec ag

[@robertopurnama1161]

Where can I buy a tool like this? Does anyone sell on aliexpress?

[@simatecSwitzerland]

Dear Roberto, where are you from? I will send you our distributors address. Kind regards, simatec

[@fizalmanhamid692]

interested. i wont to buy it. how i am

[@fizalmanhamid692]

how can i buy. pls ws me +0601125530029

[@sambitkumar4799]

How can we buy the puller

[@simatecSwitzerland]

Dear Kumar, please let me know from where you are and I will send you the address of our partner. On our website you find also a list of our distributors: simatec.com/distribution/ Very kind regards, simatec ag

[@ronaldschoolcraft8654]

As a bearing engineer (among other specialties), my concern is that this puller tool is contacting the bearing raceway with the potential to damage the bearing. The examples shown don't appear to have much interference fit in the inner, so they are getting away with it. If your bearing has a substantial interference fit on the inner, then this tool will likely ruin your bearing.

[@simatecSwitzerland]

Dear Ronald, The tool is intended to remove a bearing that has already reached the end of its useful life and needs to be replaced. The bearing is considered the consumable and the priority is to remove it in such a way that the shaft and/or housing remain in good condition. This allows the new replacement bearing to be fitted without suffering damage.Very best regards,simatec ag

[@dunloplego]

What sort of bearing engineer would recommend reusing a used bearing?

[@ronaldschoolcraft8654]

@@dunloplego actually, used bearings which have been properly inspected, cleaned and returned to service have a higher life expectancy than new ones. Statistics bear this out. You see, the infant mortality failures are eliminated from the population. What kind of bearing engineer am I? One who has designed mainshaft bearings for gas turbine aircraft engines with shaft speeds as high as 51,000 rpm, that's all.

[@dunloplego]

Ronald Schoolcraft I didn’t at all ask what sort of bearing engineer you were and no, I wasn’t asking for your resume. I will repeat my question: what sort of bearing engineer would recommend reusing a used bearing? Your types deal with the data to back up your claims but as a lowly mechanical fitter we are able to see touch hear and smell before during and after failure of the bearing. So I’m asking you that as all bearing are once upon a time brand new and become used, so how on earth do you make the claim that a used bearing (which was once new) have a higher life expectancy than a new one? This is an amazing thing to say. I think you may have out smarted yourself perhaps? Infant mortality failures? What does this have to do with bearings?

[@ronaldschoolcraft8654]

@@dunloplego well, since I am also a highly skilled and experienced mechanic who has mounted, inspected and used bearings (as well as designed and engineered them), I know for a fact supported by statistical analysis that used bearings which have been cleaned, inspected and returned to service have a higher L10 life than brand new ones. Just because you don't understand statistics does not change the truth. Infant mortality in mechanical components means early failure due to some unknown defect that wasn't caught by the inspection process. For example, an inclusion in the material that did not get caught by radiographic or ultrasonic inspection causes a crack initiation site which leads to a fatigue failure of one of the rings or rolling elements after a short (relatively) period of usage. This is considered an infant mortality in that the bearing did not achieve its design life. No matter how good the manufacturing and Inspection processes are, some early failures will always be present. These must be included in the population and considered when calculating L10 fatigue life using statistics theory. This brings the mean L10 life down. Bearings that have been in service for a period of time clearly don't have any of the defects present to cause early failure (infant mortality). Therefore, the population of used bearings which have been cleaned, inspected, found acceptable and returned to service don't have infant mortality failures included in the population. Therefore, they have a higher mean L10 life than new ones. This is born out by mathematics and my direct, hands on experience. It's a fact. Since you apparently don't know much about bearings, I would not recommend that you do inspections on bearings and I would not trust your findings if you did. So go ahead and use this tool to remove your bearings all you want. It does not make me an idiot because you don't understand something.

[@outdoorking69]

How much is this tool?

[@simatecSwitzerland]

Hi Pete, please send us your contact and we will send you the price list simatec.com/contact-3/ Wish you a great day. Very kind regards, simatec ag

[@aakashyadav1366]

How to make this tool.sir

[@simatecSwitzerland]

Dear Aakash Yadav, what exactly is your question? How to use the tool? Very kind regards from Switzerland, simatec ag

[@rambachanprajapati5051]

Nice

[@simatecSwitzerland]

Thank you!

[@chrissortman8013]

And just like that they ruined the center on the shafts.

[@simatecSwitzerland]

Not really; most shafts are more than hard enough to withstand this pressure. The threaded spindle ends in a ball, not a point. If there is any concern at all, then the kit also contains a sliding hammer which allows the bearing to be removed with no force on the shaft. If you would like to see for yourself, please contact us and we will be pleased to arrange a demonstration.

[@Karthickanushka]

Can I work in your company

[@hussainrana7596]

Thanks for idea I'll make it in my workshop.