DIY 20T hydraulic press!

I always wanted to own a hydraulic press, and now I finally came around to build my own! Tons of stuff you can do with such a press except of forging!!
There are still some mods I have to do, but I'm pretty happy about the result!
Have fun!!
~A big "Thank You" to my sponsors~
Bracenet: bracenet.net/
Fronius: www.fronius.com/de-de/germany...
Pferd Tools: www.pferd.com/de-de/
Ballistol: ballistol.de/
Stepcraft: www.stepcraft-systems.com/
Men Of Mayhem: men-of-mayhem.com/
Tanos: www.tanos.de/de/home
Leatherman: www.leatherman.com/home
Schmiedeglut: www.schmiedeglut.de/Startseite-1
Angele: angele.de/
Shaper Origin: www.shapertools.com/de-de/
Bessey: www.bessey.de/de-DE
Mr. Beam: www.mr-beam.org/en/
StampYours: stampyours.com/
Disclaimer: This is NOT a instructional "step-by-step" "how to" video! It is just an inspiration for you, and also an advertising for my person and skills... Hassan Abu-Izmero(HABU)

[@MisterRorschach90]

The first machine I ever built from scratch was a hydraulic press because I thought I could build one for cheaper. In the end I spent about the same. Haha

[@HABU]

😜😜

[@blackseabrew]

Much agreed on the price when regarding smaller units. But finding a press built like this one would be difficult. The Jet and Grizzly 35/50 ton press uprights are just flat bar. No rigidity to them. I work on an offshore platform and we have a Jet 35 ton press we use for bearings and such. It works great. But it does have a bit of deflection that I attribute to the flat bar not being built from structural steel. But what do I know. I'm just a lowly automation engineer whose software skills(weak though they may be) are supplemented by a lifetime of farming activities where my mechanic skills have helped out a lot.

[@ShahidHussain-yw3dd]

200tn hydraulic press machine manufacturers biodata full plzz

[@jondavidmcnabb]

That welder you own is a serious no BS Welder! Excellent presentation of work Hassan.

[@pedrosmith6045]

That's really amazing. Good job

[@VOVAR]

You did a very good job, keep it up. Beautiful result 💪👍

[@alexotto2683]

Werkstatt "massiv" erweitert. Einmal und für immer, gleich richtig gemacht 👍👍👍

[@HABU]

So und nicht anders!

[@SylviePereiraSyPer]

Excellent !!!! Congratulation Hassan.

[@JakeandEmmysDadWorkshop]

Amazing build! I love that you showed that we can actually make things from old fishing nets. At least half the garbage in the oceans is old fishing nets.

[@HABU]

So true! 😊

[@oscarwrq]

The reason I like Habu is because this man can always have so many good and brilliant ideas and realise them with his powerful engineering knowladge! Keep working! My aim is to have a similar 'building room' like you! Fan from China.

[@JCJCJCJCJCJCJCJCJCJCJC]

Amazing work dude

[@HABU]

Thank you!

[@the_fafologist]

You make arc welding look so easy. I can Mig and Tig anything but Arc has always been my nemesis lol. Great job. Easy to see your experience in just your prep work. Great job sir!

[@HABU]

Thanks man!

[@keithspencersr.6806]

That’s a monster, great work my friend.

[@HABU]

Thanks

[@ManCrafting]

You made this seem like a really straight forward simple project. Hmmmm.

[@HABU]

It really is a straight forward project...😉

[@pat_link_]

Super gemacht

[@andreasvogt8436]

Gut dass du an eine seitliche Abstützung des Zylinders gedacht hast, hatte bis dahin meine Bedenken bei dem langen Zylinder. Jetzt fehlen nur noch die passenden Werkzeuge füs ein-/auspressen. Gut gemacht! 👍

[@oneshotme]

Great looking press Enjoyed your video and I gave it a Thumbs Up

[@yellowmuginc]

Well.... I am super excited to make the USA version now! Thank you 👊🏻👊🏻

[@HABU]

Looking forward to!

[@garagemonkeysan]

Great video. Excellent build. Mahalo for sharing! 🙂🐒

[@elfiasco78]

Very impressing.

[@martinp8889]

Very nice work.

[@erikcourtney1834]

I had a long cylinder on mine but rebuilt it to use a shorter cylinder. I had issues with it flexing. Maybe since yours is secured to a plate that’s bolted and along with lower tonnage, you might be alright. Still a nice Hefty build regardless

[@Carlos-sz4pw]

Te felicito amigo soy de Argentina y veo tus videos seguí adelante con todas las ideas

[@user-kt2hb8xr3p]

thank you teacher

[@deathuponusalll]

This I have to see!!

[@ajsironworks3937]

Great job sir

[@sccolbert]

Most overbuilt 20T press I've ever seen. I love it!!

[@Kevin-hu8zp]

Think he meant it weights 20T😂

[@ericstoever9577]

Fun and useful!

[@Nicola_Colonna]

bellissimo lavoro 💪👍

[@nofaljamjoom]

فنان يا حسن.. keep it up man

[@lihuensaavedra6752]

Espectacular!

[@Austinificationify]

Amazing. Been debating if its worthwhile to try to make a smaller scale version

[@BauBoomBang]

Power Pure - Mega Maschine - Daumen hoch!

[@HABU]

Dankeschön!

[@calhapro182]

Belo trabalho 👏👏👏👏 Um abraço do 🇧🇷

[@JENNISWISS]

sehr geiles werkzeug🤗 wunderschöne schweissarbeit❤️💚❤️

[@HABU]

Dankeschön!

[@texanaggie]

Really like the design, i am wanting to make a wider one (40ish ) so I can bend sheet metal easier great place to start on your design

[@adamdiaz8442]

the way u have built that i personally think it could take 60ton its a beast very well built

[@FarmerFpv]

Stick/Arc welding is the only way to weld I-beams for the ultimate strength. This proves that you're the real deal and not some hack like a bunch of others that MIG everything. You did an excellent job on the hydraulic press, bro!

[@HABU]

Yeah that’s right! Thanks bro! 😉🤘🏽

[@jefflyon100]

That's funny, I suppose every structural steel building being made these days will collapse. Nothing wrong with mig welding so long as the the correct process is being used for the job. Gas shielded flux cored arc welding (fcaw) is every bit as strong as the (smaw) stick welders it has replaced in a growing number of industries. It's even being used in California and other areas prone to earthquakes. The type of mig welding being done by the average guy with solid core wire (gmaw) isn't likely to produce as deep a penetration on thicker steel it's still more than adequate to build a forging process that will last a lifetime. I wouldn't have agreed with anything I just wrote twenty years ago and it still a hotly contested subject with many, times have changed though.

[@douglasfathers4848]

Thats one BIG press mate , like they say go big or go home . Awesome Build . :)

[@HABU]

Sure thing!

[@SchysCraftCo.]

Habu awesome job it turned out very cool and clean. Hopefully you get great use out of it my friend. Can't wait to see what you make next. Always like seeing ur videos. Weld Up. Fab On. Forge On. Keep Making. God Bless.

[@HABU]

Thanks bud!

[@calhapro182]

Faz um vídeo com um tour pelo seu local de trabalho. Seria very cool 😁

[@MCsCreations]

Pretty fantastic work, Hassan! 😃 It works great and looks beautiful! Well done! Stay safe there with your family! 🖖😊 BTW, nice to meet you. I'm Mario Cesar, from Brazil. 😊

[@HABU]

😉🤘🏽

[@Cremantus]

Wie immer: schöne Nähte. Daumen rauf.

[@Soulview90]

Schön, dass sich mal jemand bemüht, Zwangslagen zu vermeiden. Ist in der Szene ja ein verbreitetes Laster. Daran sieht man, wer es richtig gelernt hat. Tolle, professionelle Arbeit!

[@HABU]

Dankeschön! 😉🤘🏽

[@120Livi]

"Velcome to da hoodraulic press channel"

[@5gerade]

Its not a press, hm? 😛 Holy... a big pile of metal!😎 Very well welded!👌

[@HABU]

🤣🤣🤣🤣🤣🤣

[@Accolade.]

حسن YOU ARE THE BEST OF THE BEST.

[@vinceianni4026]

Hello Habu big press professionally done very good job my friend

[@HABU]

Thanks!

[@OnkelJann]

Megageil! 😍😃🤙🏻

[@HABU]

Danke!

[@markfriesen1435]

Wait... did I miss it? Where's the HABU mark? It's not finished until it's been branded

[@HABU]

I branded it afterwards...

[@ascraft_germany7996]

Alter Vatter, die muss ich ausprobieren 😉😍😍

[@HABU]

😊

[@kelvinostendorf4915]

Tolles Projekt gefällt mir echt gut👍 wenn ich nicht im Keller werkeln würde würde ich die Presse genau so nachbauen. Allerdings mit einem Hydraulik Zylinder den ich bekommen könnte. Und ich würde alles Mig Schweißen.

[@mr.khateeb6967]

Hi great work from you sir Can you make a Hydraulic pump test bench For hydraulic pump ❤

[@derverschraubungstheoretik1278]

So macht das ein metallbauer 💪

[@HABU]

😊

[@djamelhamdia134]

I love all Habu's videos, I wish they were longer.

[@Baggytrousers27]

Neat.

[@touchlessgatessrinagar5408]

Abu izmero , why did you use stick weld initialy for the frame . You got a nice workshop mahsa alah

[@derkompressorschrauber]

In the end Size matters! 😆👉

[@HABU]

🤣🤣

[@d3adlyBuzz]

At around 5:50 you weld a mounting plate to the end of the Ram to fix it to the frame... Why not just make a bracket to receive the ram end as is... That way if you've to replace the ram later you won't have to weld onto the new ram to fit it to the frame?

[@alston523]

Wow definitely a solid build. Is a long distance traveled cylinder necessary?

[@AcmeRestorations]

Maybe he already had the cylinder.

[@HABU]

Yes...

[@kampfgnom13]

Cooles Teil. Ich brauch es zwar nicht, aber ich will auch eins😀👍 LG aus Wien Peter

[@HABU]

😜😜😜

[@iMobileGuru]

Я видел много самодельных гидравлических прессов, но как только увидел заставку нового ролика от Хабу - сразу понял, будет что-то монументальное, превосходящее заводские аналоги. И я не ошибся.

[@TheRumbman]

Это не 20Т, думаю 10Т макс. Слишком тонкий цилиндр, больше, чем на 160 Бар скорей всего не рассчитан. Про 50% он немного приврал. Сколько макс его станция выдаст? Все это легко считается. Да и конструкция очень не удобная, ну так, чисто плющить. Металла, как в 50Т, а толку не много. Wasted.

[@smittywerbenjagermanjensen8414]

Welcome to Habudraulic Press Channel, today we gonna crush some Fishing Nets

[@demon.d]

Konstrukcja wykonana pod siłownik, ale na 120 ton, a nie tylko 20. Według mnie nie potrzebuje tyle stali. Ja zrobiłem z ceownika 40x80mm ścianka 2mm grubości do słownika 12t i jest wystarczające.

[@mopemaster]

Was musste ich da letztens in der Presse lesen? "Golfball verträgt keine 10 Tonnen!" ;) ;) ;) Cooles Ding Hassan

[@HABU]

😜🤘🏽

[@user-kh2yl6nn3l]

Nice super long throw 20 ton .

[@BulatsSchmiede]

Hi Habu !Top Arbeit mein Lieber !So eine Presse ist schon mega cool !Gruß #Bulatsschmiede 😊🤙

[@TheRumbman]

hydraulic cylinder inner dia 75mm?

[@marciodr1963]

Você é um dos mais talentosos fazedores do YT. Cuidado com os levantamentos de pesos pesados... Não queira ter hérnia de disco!

[@MartinBarquero95]

Hi!, May I know why torching over the weld on min 2:45?

[@nukii.885]

Hydraulicpress Videos coming soon?

[@CrudeButEfficient]

What a beast! Is that s hydraulic cylinder from a truck, or what?

[@HABU]

Idk

[@peze1991]

Hallo HABU, woher hast du denn die blauen "Schraubzwingen" ? Bzw wie heißen Die ? Schauen ähnlich aus wie die Carver Clamps.

[@tobygathergood4990]

Nice build, but why only 20 tons? That frame is heavy enough for a 50 tom ram.

[@jaromy03]

How much HP or kW is the pump?

[@genasann9091]

PressTube 👍

[@HABU]

🤣

[@mafr3552]

Geil! Bau mal aus dem Fischernetz Plastik Ding ein Messergriff. Vorher alles schmieden mit der presse

[@AcmeRestorations]

Nice looking press, and a safe place to stand in an earthquake!

[@HABU]

True!

[@L98fiero]

Using the 'I' or H beam is massive over design, I made a comparable unit with 4" channel, this _looks_ pretty but should have cost about half as much if designed better. I suppose it depends on whether you are looking for pretty or the right price for the capability you're looking for.

[@carlocomodi7779]

Quali sono le misure del ferro ad "H"?. Grazie

[@DanielH]

That's heavy duty

[@HABU]

Sure!

[@Michi4777]

Mit so einer Presse kann man sich als Lohnunternehmer selbstständig machen! 😉👍 Habu, was für eine Smartwatch trägst du? Grüße

[@HABU]

😊👍🏽 Garmin Tactix Delta

[@Michi4777]

@@HABU Super! Danke!

[@therealemmpunkt]

Sieht Klasse aus, aber ich glaub dein Ständerwerk lacht sich über den Zylinder kaputt ;) Da darf ruhig was kräftigeres rein. Wenn ich was größeres finde geb ich dir Bescheid...

[@HABU]

Ja da haste recht! 😊 Danke!

[@PfuiDeibel_]

Wieso hast du den Drucktisch nicht zum verstellen gemacht ? Der Weg vom Kolben ist doch viel zu lang und der Wirkungsgrad nimmt ab, da er nicht auf kurzem Ende drückt .. ansonsten gutes Projekt 👍🏻

[@TunioMir]

did you make any prototypes?

[@HABU]

No

[@tomrspears]

Nice but why so narrow.

[@riderstodvadsatsest]

This construction must withstand a minimum of 50 tonnes.

[@welitonbruscato8188]

🇧🇷

[@acacioviegas979]

The word "esmero" in the Portuguese has the following meaning: excessive care when performing any task, work, project. I've been watching your last name and I realized that the spelling is practically the same, that word perfectly represents your works!!!

[@SluSharkND]

I wasn't sure of the usefulness, then I saw the Monster can....:)

[@HABU]

🤣🤣

[@swampy1584]

Is there anything that you cant build from scratch?😊

[@HABU]

Still searching...😜😜

[@dimitarstoiloff1964]

Dear habu please post dimensions!

[@StamosTee]

Oh sh#t... Things are getting serious ...👍👍👍

[@HABU]

Sure thing!

[@jjacoborodriguez9549]

🥰💪👌💪

[@1Independentrider]

Are you in the USA now?

[@HABU]

Nope... why?

[@MaBuKunsthandwerk]

HI HI ich habe vor Jahren so eine Presse in klein gebaut mit 10 x 10 cm Doppel T Trägern und einen 5 Tonnen Pneumatischer Luftdruck Wagenheber

[@HABU]

Top! 👍🏽

[@yousufvawda3209]

Everything looks like a nail when you have a hammer in your hand

[@dumpsterfire6351]

🫶 yes

[@user-rg8fh8rx5h]

Класс!👌👌👌

[@remoc52357]

Great job, but that's an expensive can crusher........Lolol!

[@HABU]

😜😜🤣

[@hqworkshop]

Hi hassan Your video speed is too fast We like to see your work in normal speed 🤗

[@wojciechjanecki9221]

It looks like you build 200T press, maybe that why it did cost you so much, it is far too heavy for 20T. Otherwise grate job.