DIY 3,7 Volt Tesla Coil From Flyback Tivi

In this video I will show you how to make a mini Tesla coil with Flyback TV, using 3.7 Volt power supply.
Accessories:
- IRF Z44N
- 220 Ohm . resistor
- Battery Power 18650 3.7V
- 0.6 mm . copper wire
- Non-PVC 34mm, 42mm
- Food wrapping foil
And some tools like in the video
Don't forget to press the SUBSCRIBE button to watch the latest videos!
THANK YOU FOR WATCHING THE VIDEO!

[@Tran_Nam_Tuoc_VN]

Thanks for watching. Subscribe to support me!

[@saimhasand0074]

You can do far better If you adjust the Resonance Frequency of the secondary to the Primary. The formula is - f=1/2π√LC Just find out the Inductance (L) of the secondary and Parasitic capacitance of secondary. Calculate the resonant frequency. Then Tune the primary to that frequency and also the change the capacitor of the primary according to that frequency to get even better results I Hope It Helps❤❤

[@togetherforever3673]

Me encanto esta genial muy buena idea para un mi experimento de ciencias

[@npsinghpurohit.4330]

Thank you

[@livia-671]

O experimento ficou muito bom só queria a explicação

[@billop1000]

BEAUTIFULL

[@Mario-ye9pt]

Vou fazer uma dessas.

[@soldadoferido1929]

Eu tinha uma. Vou refazer

[@samuelzimiwaterson3703]

Vou dar a bunda​@@soldadoferido1929

[@user-cv2un4ef5n]

Gracias: thanks

[@romero6250]

Hola, la bobina secundaria solo va a el papel aluminio ? Nada más ?

[@franciscochavez5925]

Dice que el alambre de cobre de la bobina primaria es de 1mm o 18 awg y en la descripción 0.6mm o 22 awg pero a simple vista es 12 o 14 awg?

[@joseluisbatistaramalho7227]

Gracias !!! 🙏

[@Egzoset]

Tesla Coils are musical these days...

[@noeotero4498]

Thanks

[@andyroo3022]

So the secondary coil wire just goes to ground on the foil sheet underneath the wood base?

[@user-cv2un4ef5n]

Tienes ondas escalares para nunca enfermar

[@norkysluna8341]

How many rounds there are in the secondary?

[@user-eu6xe4sw5k]

Unfortunately you didn't explain any of that correctly and the flyback requires a dc rectifier diode and at least two transistors that can handle the flyback load and finally a ball and aluminum foil. Please always make everything clear, maybe a teenager will see and want to fix this and get into trouble.

[@tgfourie9564]

So why is it working. Go play outside, us adults are busy takling.

[@avengergaming4507]

Brother do these flybacks not have an internal rectifier? Then how can a tesla coil work on dc?

[@halophony6709]

It is AC, there exists a transformer.

[@avengergaming4507]

@@halophony6709 brother at the END there r rectifiers, obviously voltage can changed when it's AC, but in many uses dc is required so that the end there is an. search the circuit of these

[@alichank]

Such Tesla coil's work relies on the resonance between the capacitor and the coil of Tesla's primary. The input voltage doesn't have to be AC

[@iNEJiggles]

Not to mention that when the dc is being interrupted via the spark gap and capacitor combo, it is thus a form of AC current. Pulsed DC but still.....

[@avengergaming4507]

@@iNEJiggles oh yeah

[@Gowriprasad1970]

Nice

[@anjumshaikh1036]

Bro , is it necessary to use the flyback transformer?

[@luisjose8102]

Yes

[@ishatkhan4345]

Resistance of mosfet

[@kiokayak]

Can i use a fkyswatter transformer?

[@hanml9256]

Es increible

[@bastighg1559]

My transformer just breaks 2 kv and 5 kv capacitors what should i use

[@vayunyadav8403]

Ceramic Capacitor 1000uF 30kv

[@tarunpurohit6522]

What is the frequency of primary voltage

[@bezutec]

+/- 200khz

[@malindurajapaksha1791]

Bro are those lithium batteries please I am going to make it tell me it please

[@franciszekbiegowski278]

Yes, it is lithium batteries

[@vojtaprinc7380]

they are the 10650 li-on batteries

[@malindurajapaksha1791]

Interesting it didn't work a . Just a little arc not a big one like in video but I did it like the video did but I made a different one with a tvs

[@Jasan15.]

Me gustaría que explicara el video

[@TheArticwolfs]

Hello, what capacity is the transistor?

[@franxchiesto]

the transistor has no capacity and its a mosfet

[@user-no7ki3gc1w]

i whould use 3 9 volt batteries

[@animationcreatorgroup9409]

Sir power dane ke liye sirf battery use kiya na....ac use kiya kya

[@user-ic4wv5mn4q]

De cuánto es la resistencia? Ayudame porfa la voy a hacer

[@the_funnyREAL]

Son de 220 ohms

[@user-uk9pq1xh2w]

pudiste hacerla?, de cuanto es el transformador?

[@joseluisbatistaramalho7227]

Que transistor va en el fliback ???

[@edgarparedes3885]

IRF Z44N esta en la descripcion

[@user-uk9pq1xh2w]

what kind of transformer is it?

[@rachnabhatia3308]

Eht flyback

[@RaviSharma-cz3yl]

What is EHT ??

[@vineethvenugopal8613]

Extra high tension

[@malindurajapaksha1791]

Can we use 9v battery

[@TiristoR09]

yes it is possible but the effect will not be the same

[@vojtaprinc7380]

what is the mosfet

[@edgarparedes3885]

IRF Z44N

[@vojtaprinc7380]

thank you

[@hasinikaushalya8739]

How to mosfet

[@edgarparedes3885]

IRF Z44N

[@ConanDuke]

Fresh Darwin Awards are going out with this one.

[@testlopez7517]

Xdxdxdxdxd

[@user-eu6xe4sw5k]

Unfortunately you didn't explain any of that correctly and the flyback requires a dc rectifier diode and at least two transistors that can handle the flyback load and finally a ball and aluminum foil. Please always make everything clear, maybe a teenager will see and want to fix this and get into trouble.

[@acerigaslc]

Los que conocen los tv gordito saben donde esta la fuente de alta energía osea la parte negra en el experimento y el resto se ve a simple vista

[@HighVoltageArcs08rd]

The reason why this guy doesn’t explain anything because this video was cut from another video of another channel

[@erikeduardovasquezcopara2649]

@@HighVoltageArcs08rd video name?

[@HighVoltageArcs08rd]

@@erikeduardovasquezcopara2649 I don’t remember what the video name but it creator have KZbin grey tick