DIY 3D Wall Panels

[@PCBattlestations]

Cristian! My wall panel brother! Love the vid my dude! I feel your pain of installing these wall panels and what to do with ending the video haha!

[@PCBattlestations]

@Mohammed Alaa Hussein No you!

[@Polaryst]

where did you get the ceiling lights from?

[@kittebetta]

Good one. ❤

[@music4tsoul]

Nice wall I just have one issue with this: why did you use jigsaw for cutting the panels? I mean they are plastic you could use some sharp scissors to cut them and it would look way better, now you have a gap on the angle wall.

[@Reality_Dystopia]

How do you get the angle 📐 for the left side?

[@kaustabhsarkar6547]

Love this video. Why did you caulk the tiles though ?

[@ryanpeterson747]

Great video. Just helped me out a ton. The iPad on the wall really gives it a nice touch

[@VaideRx]

Glad I can help !

[@hockeyman1]

Looks good bit I would probably put a line of caulk up in the angle wall to hide the imperfection

[@clivethereddevil3178]

I have just bought the exact same tiles for the walls on the entrance hall to my house in England. I am doing the bottom 3 feet in wooden vertical cladding pieces 4 inches wide. I am then adding a dado rail and putting the 3d panels on top. The wall is not exactly flat and I cannot be bothered to knock off all the plaster and start again. You have done a great job there. It is so hard to do a sloping part properly but you have managed it well. It just needs a bit of white filler putting in the gap and you will hardly notice it.

[@VaideRx]

Thanks bro ! Yea the imperfections are hard to see and I also came up with other solutions that helped with it , needed up putting lifx lights which covers it completely . I replied a month late checking up to see if you finished your project ??

[@clivethereddevil3178]

@@VaideRx I started it but my father died three weeks ago and I did not have any motivation for a few weeks to do anything. I have gone away for a week to recover and will get back to it when I return. Thank you.

[@annmariejowers3259]

I stupidly bought them for a stair case so iv put it off for a year having to angle top and bottom 😮where to start ? 😢

[@sonalidesale800]

Thanks for the great video, my question is How do you hand pictures or wall decor to hang on wall after putting this panels? Whats the trick. Thanks

[@VaideRx]

I would just put a screw through the panel or maybe just use double sided tape . You can go with many options

[@sonalidesale800]

@@VaideRx Thank you for immediate respond. Would the normal drill be good to make a hole through the panel?

[@ijazzzali]

Whats the size of those panels?

[@zacharywilliams9848]

Nice job! I appreciate the pointers, I wouldn't have thought about getting the extra rags.

[@VaideRx]

As long as you gained some knowledge from it I did my service

[@busrolla]

Seriously though. Great video brother!

[@VaideRx]

Thank you bro !

[@K5Adventures]

The wall turned out great. Nicely, done! My wife wants me to do this for our daughter’s room. I’m wonder if it’s possible to heavy duty scissors to cut the panels as it doesn’t look every thick?

[@lunaedward6574]

Omg, you're a boss!!

[@TheCaptainYurk]

How messy is the liquid nails adhesive if you decide to take the panels down from your wall down the road?

[@VaideRx]

I wouldn’t know since I haven’t taken it down but my assumption is that it might be messy, you’ll probably rip down the sheet rock paper . The adhesive is very secure after is applied

[@erikakitaoka2430]

Hi! Thank you for this. I’ve been researching to make a 3D wall in my apto and your video was very clarifying. I have some questions. You decided for liquid nails. Did you consider double sides tapes to be easier to install? Did you find out any down side about it? I realized it’s much more expensive than the liquid nails, but do you know if it holds well? If I decide to use the liquid nails, I don’t know how many tubes to buy. Can you tell me how many tubes you spent and how many sq ft was your wall so I can calculate for my wall? Thanks again! Amazing video.

[@artemio8]

I used double tape and it works better and faster

[@martijn.faberr]

Can you put cables behind the panels?

[@VaideRx]

Nope

[@Darus2013]

Hey what pot lights did you have installed?

[@doranfrancis706]

I have stucco walls... package says it's only for flat... HOWEVER, I really believe it will still work... sooo I'm going to try it. What do you think?

[@VaideRx]

I wouldn’t go w this man maybe focus on a more foams based panel since it will mold better on your stucco wall. Sorry for the late response just saw this

[@beatless3126]

does it work with double sided tape ?

[@CharlieThePug]

This only the 12 pack right?

[@jhonap2699]

How much is about 6 meters of this product ?

[@cedrickviky]

Where did you purchase the tiles

[@VaideRx]

Martine amazon link is also in bio

[@dyannzepeda2323]

Great job

[@VaideRx]

Thank you 🙏🏾 hope it helps you out

[@persian-k4i]

Love to see a vid with no dislikes

[@NotYourFinalDestination]

Chris thank you for sharing this video mine come in on Wend.

[@VaideRx]

No problem brotha goodluck

[@B_M_A]

Looks solid but I'm not a fan of the middle left side panel and some of the upper ones I feel like you should have rotated the panel so the flat edges line up and the gap you can put your hand through would be up against the wall. Maybe you ran out of material or just didn't notice until the end. I want to do this myself but it seems like a ton of work.

[@VaideRx]

I wasn’t worried about the angled wall as much since I planned to put the lifx lights to cover the imperfections. I was more concerned about the actual edges from the panel matching together Through out the wall. I wish I could post a picture so you can see the full set up ahah Honestly it’s not that badddd , it’s like any creative project once you’re in it it’s a vibe brotha 🤘🏽

[@blahhhblahblahhh3741]

Is this rental safe ?

[@rommiemex9532]

Looking at the same panels. Any thoughts on audio impact?

[@DADDY-rl3bf]

Mines 64$ so if I buy 1 how many sheets do I get

[@abdulazizamh6495]

12

[@xmistamagicx]

That 1 box did that whole wall?

[@VaideRx]

Justin Hammer 2 boxes !

[@patrickgstir]

Hey i have a question: The website of Art3D lets you change the color options and there is PC001 and PC002. but on the table they look both white. kinda confusing so what are these you used?

[@busrolla]

My dude, them shoes straight out of a M. Night movie. Blink twice if they are possesing you.

[@VaideRx]

Haha those are the saucony bodega collab can’t remember the name exactly Got them in blue as well 😅😅

[@avokovich3579]

im very late but is the adhesive hard to take off? I live in an apartment and want to install this without damaging my walls

[@VaideRx]

I wouldn’t consider it then , most options will damage the wall once you try removing it .

[@avokovich3579]

@@VaideRx so you suggest command strip velcro?

[@peaceofsheet_]

is that matte or glossy?

[@VaideRx]

Amaranthine Plus it’s matte

[@ray83baby]

How did you cut out the electricity outlets? Great video

[@VaideRx]

I used the jigsaw but I first punctured a hole that was big enough so that the jigsaw bit would fit and cut around it obviously made sure to take a measurement and see where the actual outlet was going to be and yeah

[@littlecat87]

Hi i wanna hide cables behind them because i got many wires to hide , led strips, any tips about how to do it?

[@UniquelyMeAlmaLee]

You'd have to build it out with planks behind. If you're going from wall to wall then you won't really be able to see the difference. You'll know it's a false wall but others won't if done correctly

[@littlecat87]

@@UniquelyMeAlmaLee you mean I will have to put the 3d pannels behind the wall? There should be a way to hide the cables behind those pannels without cutting them

[@DoubleMyIncomeSociety]

Thanks I’m looking into designing my mini studio. Thanks for the tips. You gained a new subscriber!

[@VaideRx]

Goodluck with your design brotha and thank you 🌊🏄🏾‍♂️

[@michaelanderson8395]

Hey man thanks for the video. Few questions, I have a gray wall, do you think I need to paint it white first? And my other question is the directions say you should start from the center of the wall and work out, is there a reason you started from the edge/corner and do you think it makes a difference?

[@VaideRx]

Wassup Michael , if you are thinking of covering the whole wall with the panels I don’t see the need to paint the wall . I started from the edge to prevent less cuts from corners that were exposed. I personally wish I started from the right bottom side , that would have prevented less cuts which would have gave me a cleaner look, work from your setup perspective and it will flow naturally to your perfections 🌊🏄🏾‍♂️So word of advice , focus on the corner that is most exposed to your eyes.

[@mustafakhairullah2729]

hey! love the vid! how much adhesive did you end up using?

[@VaideRx]

Mustafa Khairullah I ended up using 4 ! Not bad at all

[@artemio8]

Better to do with double tape

[@bingzgaming1318]

@@artemio8 think it’s fits more flush with liquid nails tbh

[@cannarris]

How to the panels feel once installed ? What happens if someone leans on them do they collapse inwards ?

[@VaideRx]

Mike Canaris they look great man and no they are very firm panels !

[@cannarris]

VaideRx thanks!

[@TekkerBros]

How do u take them off?

[@VaideRx]

You don’t haha

[@Zebiven]

Ayye love the content fam, great advice!! :)

[@mikegresham9424]

Where do u get the panels from?

[@VaideRx]

Got it from Amazon

[@timothyplayz702]

Personally I would’ve purchased the bamboo material version. Reason being is that the pvc panels aren’t really healthy for you to breath in. They got a whole bunch of chemicals that you’ll breath in overtime. Since you’ll probably spend a lot of time in that room it’s better to get an alternative material (bamboo) ... in my opinion. Great vid tho

[@seanreacts7333]

why dont u tell that to kids who vape all day

[@jaredahkeem]

Really cool set up man. Always end your videos like this 😂

[@VaideRx]

Jared Andrews “Life’s is weird, we’re all weird” new motto 😂

[@jaredahkeem]

VaideRx “Life’s weird, we’re all weird. See you next time” Best ending on KZbin

[@VaideRx]

@@jaredahkeem ill keep that in mind man haha

[@gamingreuke]

It was 999 before I click the like button and turned it out to 1k likes. Let’s go Thanks for the vid. I’ve considering installing those 3D panels as I’ve been designing my own gaming room. It just takes me so long to process because I like everything so perfect so I wouldn’t regret spending a penny By the wayyy, the downside of those panels is that you can see through the edges or corners.. is there a way to fill up that gap or at least cover it because it’s very noticeable e in every video i watch

[@pamg609]

I have angled walls. Thanks.

[@kaelenmendoza7738]

What r the measurements of each panel and how many panels come in one box from wayfair?

[@WRSTxPumbaa]

1mx1m come in 12 per pack

[@deepickles1]

@@WRSTxPumbaa it’s 50cm not 1m

[@WRSTxPumbaa]

@@deepickles1 there are small and big versions.

[@PROPERPAPA]

nice video brother! this is gonna help me out this weekend.

[@VaideRx]

jed papa thanks bro , glad I could help 🤘🏽 Good luck w the installation

[@MistedForest]

Good job. Thank you for these how to videos.

[@marquisjones90]

When your ready to remove the 3d panels does it rip off the current paint job underneath?

[@VaideRx]

Haven’t tried that yet my assumptions Is yea

[@marquisjones90]

@@VaideRx one of the many reasons why I haven't brought this yet very apprehension about doing it

[@Heypockeyway]

@@marquisjones90 Try thin strips of 3M double sided tape.

[@chrisraven8682]

@@marquisjones90 you can nail a thin sheet board first so if you need to remove it won't damage wall

[@mainanawacho5322]

@@chrisraven8682 very smart

[@vrhxrry2026]

how do u take them off

[@VaideRx]

vR HxrRy you don’t man they are permanent

[@ivotenotocensorship5247]

@@VaideRx lmao

[@ASJerrell]

Love this video. Keep it up, no doubt this can be huge. Your attitude and edginess is unique in a DIY setting. And for sure thanks for the info on the panels!

[@VaideRx]

Andrew Jerrell dude I appreciate it the kind words ! Comments like this makes me want to continue 🤟🏽

[@ALONER_PELLE]

Looks great bro!

[@rameshrajan5480]

Awesome man lot of loves

[@guillermoortiz1492]

Awesome brother..i ended up with 3m double side tape

[@VaideRx]

Nice ! I thought about it but I felt like it would stick out . How did it come out ?

[@eustaciosolisii]

Bro I have the exact same walls Iglad I found your video 💪💪💪

[@ms.c3977]

I love this video. Thanks for the tutorial.

[@amirabujaber8387]

Awesome vid my man, what’s the dimensions for each panel?

[@easynow76i]

Excellent. Thank you.

[@flickboogers9325]

Solid

[@luxeacrylic3082]

You can be in that head & shoulders shampoo commercial lol thats hair

[@michaeltaj6756]

I know you tried your best but I wouldn't accept that quality of workmanship, you would have had a better finish if you had first started from the door frame going towards the corner of wall so you get the clean full peace of the panel on the part you see most then you should have used combination of double sided tape and glue to adhere the panels quick and maintaining the zero gap when sitting beside each other. good luck though.

[@VaideRx]

I’m a electrician brotha that happens to enjoy creating, either way it came out fly to my eyes but thanks for your insight 🤟🏽

[@shawnkay5462]

My Brother in Wall Panels

[@tidez23holder80]

Brah you did ya thang seriously whoadie God bless ya I'm n Christ name good vibes ya digg!

[@januskaminsky5399]

Dude, you could have saved a lot of anxiety by marking out all the panels (including the angled ones) with a pencil on the wall BEFORE you pasted them on the wall! That way you wouldn't have some uneven joint lines.

[@VaideRx]

I don’t have any anxiety while doing it the only thing that I would’ve changed is I would’ve focused on starting from the right side of the wall then work my way to the left because it was most exposed when coming up my stairs you see the right side of the wall first and then the left side is Chyna the back wall that makes any sense.

[@Theycallmegolddigger]

Bro you look like Jason Mamoa

[@harukafendo]

Yo he’s from setup wars

[@zip7806]

Unfortunately that flimsy PVC is going to resonate. Folks don install this if you want a serious audio room.

[@KilometresPerHr]

I got the same name as em lol

[@keithodonnell2974]

Aqua man can diy

[@AllHouseRecords]

Ohhh nooooo.....double sided tape bro 😎 I work with the owner of the factory here in China.

[@VaideRx]

Ehhh I like what I did man