DIY #7- Home Depot Do It Herself Wooden Stand

[@breakingthread]

Yes, I made one too. Still have to paint it and buy the ice bucket. It was sooooo much fun using the power tools. I love their workshops. Great tutorial

[@myownIDENTITY2016]

Nice job! it turned out great...I'm not patient enough for DIY projects...I like want it yesterday, lol shame I know. But this look pretty easy! TFS

[@carolinabluejae8138]

Thank you! This is actually one of the more simple projects from their workshop. They have a pot hanger course next month and it looks pretty simple as well. I encourage you to take a little challenge :). TFC.

[@jonatlhonward1341]

THANKYOU VERY MUCH FOR THE STAND WOOD SIZES .I THINK FOR PEOPLE LIKE ME JUST STARTING OUT IN WOOD WORK THIS PROJECT IS ONE OF THE BETTER ONES I HAVE SEEN.because of its simplicity and practicality. i have been looking out for these type of projects for months. keepem coming JEANNIE Australia down under.

[@akilarajaraman]

Wonderful tutorial! Do they charge you to make and take the project item with you? In the past they didn't charge me. Recently they have started charging me for making and taking it with me

[@scotth5305]

Good job lady.

[@carolinabluejae8138]

:) Thank you!

[@jonatlhonward1341]

we would like to make the stand' where is the description box as we are having trouble finding it. or if you could tell us the sizes that would help us a lot kind regards jeannie

[@carolinabluejae5822]

Stand instructions From the 1˝x 2˝ x 8´ Boards (4) 1˝x 2˝ x 28 1⁄2˝ Legs (2) 1˝x 2˝ x 16˝ Long Frame (2) 1˝x 2˝ x 14 1⁄2˝ Short Frame (4) 1˝x 2˝ x 14 1⁄2˝ Shelf Brace From the 2´ x 4´ Plywood Board (1) 16˝ x 16˝ Top Shelf (1) 141⁄2˝ x 13˝ Middle Shelf (1) 14 1⁄2˝ x 13˝ Bottom Shelf I then sanded raw edges and spray painted the pieces with the exception of the top of my board. Create your circle for the bucket to rest: Mark the center of the 16˝ x 16˝piece of plywood. Nail a nail into the center mark and tie a string around the nail head on one end and to a pencil on the other end. Make sure that the string when stretched from nail to pencil is 5˝. This is very important. Too big and your bucket may slide through. Draw a circle, keeping string tight. You should have drawn a 10˝ diameter circle. Next, using a 1⁄2˝ drill bit, drill one hole inside the edge of the circle. This is where you will insert saw blade. Using the reciprocator saw (Jigsaw), cut the circle out around the edge. Assemble your parts: Top Shelf Frame Stand the (2) 16˝ long frame boards on end and parallel to each other. Sandwich the (2) 14 1⁄2˝ short frame boards between the long boards to create a 16˝ x 16˝ square frame and secure with brad nailer. Leg Frame Lay (2) legs flat 14 1⁄2˝ apart. Using brad nailer, attach (2) 14 1⁄2˝ shelf braces to legs with the first attached at 7 1⁄2˝ up from the bottom of the legs (for bottom shelf) and the second attached at 171⁄2˝ up from the bottom of the legs (for middle shelf). Repeat with the other (2) legs and shelf braces. Assemble the Station Place top shelf frame on flat surface and insert leg frames upside down into frame with shelf braces facing inward, keeping legs flush with the corners and top of frame. Secure with brad nailer. Ensuring legs are secure, turn station over and lay (1) 14 1⁄2˝ x 13˝ section on top of the bottom shelf braces and secure with brad nailer. Repeat with 14 1⁄2˝ x 13˝ piece for middle shelf. TIP: Attach bottom shelf first, then middle shelf. Finally, place the 16˝x 16˝ piece on top of shelf frame and secure with brad nailer. Spray paint the top of the beverage stand and touch up any other areas. With a drill and appropriate drill bits per instructions, install the towel hook and bottle opener.

[@jonatlhonward1341]

could you please include the sizes for this project grate project jeannie

[@jonatlhonward1341]

what are timber sizes

[@carolinabluejae8138]

There's an detailed list for measurements in the description box. If there are any other questions please let me know. TFC.

[@jonatlhonward1341]

hellow i am sorry can you please tell me where the description box is thankyou jeannie.