DIY: AIRBAG connector replacement EASY!

[@Spacesprocketz]

Finally, a video with concise directions and instructions on what they're doing! Thank You! Too many videos with ppl cutting to the final result with 0 commentary on how they got there.

[@3brandonross]

Thanks for posting this video. I just save myself a trip to the junkyard with your help. Hopefully it will all work now that is put back together.

[@floridakid7975]

Brother thank you for informative vid! At first I was like what is he getting at? Then it all made sense, you are a genius. Ordering new clips now but I got the wires out and ready, new airbag on standby 🙌🏽

[@filia1812]

Thank you so much bro, you just saved me hundreds of dollars. Foreals man, thank you.

[@cuttingedgecool7235]

Excellent, excellent demonstration and explanation, thanks a million. I just subscribed.

[@toddfinney2698]

Thank you for doing that video. That was Huge help.

[@ELEVOPR]

Great job, but I don't think I want to reuse connectors that have already blown and been attached. Isn't that little black square chip on the connectors some kind of resistor? If not what's it there for? Thanks again.

[@drwatson1234]

Super clear and very useful!!

[@BRATzAMERICAN]

You number 1🎉

[@Nostalgiclogic363]

I bought a car that I knew had been in an accident with an airbag deployed from drivers side. It has a good but used replacement from the junk yard but I noticed the light not turning off so I decided to investigate. It seems the wires were cut but I don’t see the l connectors in the old airbag that came with the car. Do you have advice on the best way for me to fix it myself cheaply? Also I can email you photos if that helps. I’m normally into technology and building robotics but have recently started learning how to fix and maintain my own car so I’d really appreciate any advice you may have and if you ever have technical issues with computers phones tvs home devices or even IoT I would gladly help in return anyway I can

[@mehere3013]

does it matter what way the 2 wires go around ?

[@sambulucci]

Quick question. My 16 nissan maxima has one yellow pin on steering airbag But my 19 nissan maxima has 2 pins yellow and red. Why is that?

[@louisventura1158]

Save my day😃😃😃 Thank you.

[@timothy4122]

Man I broke the metal thing in mine i think I’m just gonna splice them together and put shrink tubing over ot

[@Romi-by1dj]

Thank you bruh you made it look so easy for me to fix mine

[@amirr2216]

Thanks so much just see this video it's so help full thanks today date 09/03/2022.

[@Tinybench]

Thank you Thank you Thank you so much!!!!!!!

[@samelias8440]

Perfect 👌

[@amirr2216]

I subscribe Brother thanks so much .

[@deadboygrim3580]

Will this fix the horn as well?

[@alfreddmoore]

It possibly could because you are changing the airbag and the horn mechanism was most likely damaged when the bag deployed.

[@Giorgimm11]

@@alfreddmoore Hi, I have the exactly same situation you explained in your video, cables from steering wheel are hanging and I got new plastic heads, but there is a one more issue there are some slight melting signs on cables too but inner wire not visible I guess, so it will be a risky if I just replace the heads? ( Or protecting melted wires with some additional tape will be a good idea)

[@KingQuarterroy]

Thank you so much!!!!!

[@likeasparrowinthewildernes8333]

try using a solder iron to remove plastic #allgloryhonorthanksandpraisetotheMostHigh#

[@imthexman]

😢