DIY Arduino based Tesla Coil Winding Machine | Arduino Project

PCBA from $0（Free Setup,Free Stencil):jlcpcb.com/IYB (New Users Get $30 Coupons)
Hello friends in this video I have made a Tesla coil winding machine, I have use 2 stepper motor in this project, one for wire guide and one for winding
User can insert data from HMI like the length of winding and wire diameter in micrometer, based on this machine will automatically wind the coil on tube.
Arduino code :
drive.google.c...
HMI code :
drive.google.c...
Multipurpose PCB :
oshwlab.com/sh...
• This PCB is all you ne...
💻visit for more projects :-
👉 / mrinnovative01
👉 electricdiylab....
👉 FB page :- / innovativemr This video is made for entertainment purposes only. Please use judgment, care, and precaution if you plan to replicate. WhatsApp for custom projects [phone]

[@ShopperPlug]

This is the best simple coil winding machine I have seen so far, it is precise and coils perfectly.

[@AndySpicer]

That was very good brother! The one thing I would say is that I’d much rather hear you talking along the way than to hear the music. Maybe you are worried about your English? If so, your English was great in the JLPCB section. Don’t let that stop you.

[@michaelconnor835]

Seconded. Your shots make it extremely clear what is going on, but i always find the most useful info is the thought process behind a maker's decisions. This is the first video of yours I have seen, and I will be on the lookout for future videos from you! Great work!

[@AndySpicer]

@@michaelconnor835 yeah bud., spot on. That’s one seriously talented dude.

[@G0j0_S4TUR0]

I waited 1 month for a new video. At last it comes 🥰🥰🔥👌

[@elliotsever8308]

Oh, and the sound of your voice is excellent and, by itself, encourages the viewer greatly.

[@blameyourself4489]

I could have used one of those one week ago. 85,5 meters by hand. But it was spot-on as calculated!

[@HashirEasa]

thats a lot of work, was it worth it?

[@larrygomer]

Got to have one of these I built a coil winding machine powered with a 1/2 " drill this way better . Nice engineering , well constructed.

[@nicholasparks500]

Damn, that motor reveal was smooth af. Keep up the greatwork!

[@igxniisan6996]

No.. I want it to be able to actively measuring the wire width during it's run time so that it can correct even the slightest errors.. especially when using wires which are wider and not wound in spools but from old transformers..

[@VorpalForceField]

You even made your own GUI interface ... Nice work ..!!!

[@youmakeyourfuture3392]

Sir I am your big fan 😇I like your project 😀

[@The-Master-of-None]

Pleaseeee. Make a transformer winding machine. Please! 🙏🙏🙏 Your videos are awesome. Thank you!

[@elliotsever8308]

This is an excellent video! Cool winder, of this design, is a very helpful device to have in the shop. PCB information very helpful.

[@barujtc9095]

Hola Mr Innovative. Buen proyecto, gracias por compartir. Sobre la pantalla que usas cual es el controlador y donde lo conseguistes, gracias. Saludos .

[@buyme1cnc]

The traversing (to the left or right) moves very precise, thanks to the timing belt 👍

[@-______-______-]

Looks like a great device, but I notice you don't reply to *any* comments. Some of which say that your code is wrong. Why?

[@homemadetools]

Nice work. We shared this video in our homemade tools forum this week :)

[@alpersoneriskc364]

Can you send a link? I need to do the same.

[@-______-______-]

Wow. 10 bucks a month to join your forum. May as well just buy the tools!

[@aaaooaao9949]

Vll. sehe ich Das ja etwas eng - aber MUSS in diesem Projekt unbedingt eine doch eher hochpreisige Linear-Führung verbaut werden? Oder eine Trapezgewindespindel? Wären hier 08/15 Rundführungen und eine M6er Gewindestange nicht ebenfalls zielführend gewesen und hätten, zu deutlich weniger finanziellem Einsatz, zum gleichen Ergebnis geführt? Es sind auf diesem kanal durchaus einige nette Umsetzungen zu bewundern - aber muß unbedingt unnötiges Geld in diese Spielereien gesteckt werden? Selbst, wenn die Linear-Führungen gesponsort sind (hätte davon aber Nichts gelesen), sind Diese 'wie mit Kanonen auf Spatzen'. Und wenn man schon will - einen L298 ... in der heutigen Zeit gibt's sogar Motortreiber, Die nicht die Hälfte der rein gesteckten Energie verheizen - dann bitte richtig auf die Kacke hauen! ... man kann halt auch mit einem 40-Tonner die sonntäglichen Brötchen beim Bäcker holen, aber muß man Das?

[@RomPereira]

That is an amazing project. I am trying to learn about timing belts. Could you please point me in the right direction?

[@basilstadnik1342]

а машинку для намотки катушек для индукционных печей ? (for induction ovens)

[@raydan18]

Why don’t you make few of these and put them up for sale? I’ll be keen to grab

[@erickrosado680]

Hello, how did you manage to know how much you could tighten the copper wire without it breaking? Thank you

[@electronic7979]

Excellent project

[@Magic-Enlightenment]

Is there any information on how the wire guide is constructed? any 3D printed parts download?

[@Edmorbus]

Great project can you share the 3D files

[@petermuller608]

Nice video! Nevertheless those belts appear to have way to much slack

[@tiaan1587]

Can you please do a full tutorial on hoe to set yp the screen and especially on how to eet yp the touch to work as there is no easy information online on how to do this

[@Archer198026]

It's a Nextion display, that handles all touch input and graphic display internally and just send out serial data to the MCU. For example Click button 2 = send "Button2" as plain text over serial

[@fenixalorca3143]

¡¡ G R A C I A S !! ✨

[@szekerespista3758]

Do you have a winding machine for sale?

[@Koto-Sama]

what are you doing with the the stuff that the machine creates?

[@minetech4898]

Probably making Tesla coils.

[@Oshan_Dissanayaka]

Great project... Good luck bro...🤞🤞🤗🔥🔥

[@kalyanreddy9991]

Bro..The Program that have given in the description is having compilation errors. Please help

[@indrojitsikder8671]

HOW CAN I USED 2.8 TFT TOUCH SCREEN LIKE A HMI AND HOW CAN I PROGRAM IT

[@sospitoso]

Tenia pensado hacerlo pro en vista de los comentarios y las nulas respuestas voy a buscar por otro sitio, Lastima de C.I que compre. Un saludo amigo

[@MOHAMMADKHAN-ps5sv]

Hi , can I buy this product from you ?it will be very helpful. Thanks

[@91rickstar]

Can it do voice coils too

[@cjjagodana3151]

sir please made spring coiling machine

[@TechsScience]

Is it necessary to use Arduino shield?

[@Inertia888]

The Atmel 328 chip can be integrated directly into the PCB, but you would have to redesign the gerber files, or make your own version. Not super hard to do with a little learning. I like to use either "KiCad", or "Easy EDA" for designing PCB, since they are free to use and relatively simple to learn. If you have never designed your own PCB before, a great place to start learning how is to design your own DIY Arduino UNO. This is because there are tons of tutorials on that subject. Once you understand how to make your own UNO from scratch, it will be much easier to look at the PCB that is presented here, and decide how and what to change for your own design.

[@giangla8171]

the link to the code does not work, upload the archive again , please

[@drewwalker101]

@4:26 how does that large gear fit to ball screw?

[@TecSanento]

Can it also wind back and forth?

[@bitsurfer0101]

How do you get your pulley distance or belt sizes?

[@elpatron2338]

Hola , oye los panas y querés que por favor nos enseñes a hacer una máquina de soldar de microalambre por favor 🙏

[@adambeedle]

Great video man 👍

[@sistemasdeflejadomexico233]

Hi great job. Please Could you share the code and more details

[@shijumax1]

Mr.innovative the codes for Arduino you have given is wrong. I don't understand why you are always publishing wrong codes. You have not included Nextion library and as per you video you are showing that you connecting your multi PCB . And the stepper motor ports in your code is wrong as well.

[@szekerespista3758]

😮 oh, no!

[@schabanow]

It is absolutely unnecessary to build an MC based machine to make a Tesla coil easily. Turn lays by turn tightly if you give a wire some free distance from your fingers to a coil rod. Just table, carpenter clamp, electric drill, wire bobbin on floor and your good will. Secure a wire end on a coil tube at the left, set proper rotation direction on your drill, put a wire bobbin on floor vertically, between your foots (take your seat at a table), take a wire with your fingers (between a thumb and a pointer), and make FIRST STRAIGHT TURN of a wire manually, rotating a chuck with your left hand. Then GIVE FREE GAP TO THE WIRE BETWEEN ROTATING ROD AND YOUR ARM - OF ABOUT A HALF OF A METER. Give medium tension to the wire and PUT YOUR HOLDING ARM A LITTLE BIT LEFT TO THE FIRST TURN, ABOUT A CENTIMETRE, (if your winding direction is from the left to the right). Turn on your drill and wind your TIGHT Tesla coil wlthin a half of a minute! As drill runs, move your holding arm along the coil winding, in order to maintain initial angle (a little bit less than 90 degrees) between pulling wire (that runs in the air gap) and the wired part of a coil. Doing so, you will make your turns to "pull" each other - the next one pulls onto previous one - just in good natured manner, without any MC automation. Have fun!

[@RixtronixLAB]

Nice video, keep it up, thanks :)

[@vkjeyaraman]

i want this winding machine how much price👍

[@wardihermanto458]

Rewinding motor stepper please...🙏🙏

[@Drxxx]

Channel "Arduino Worlds" stole this video.. name of video is "DIY Arduino based Tesla Coil Winding"

[@dh7582]

Are the 3d files available?

[@wardihermanto458]

Winding motor stepper please..🙏🙏

[@vijayur9414]

Please make mini package machine

[@giangla8171]

the code can not open what happen ??

Wonderful

[@hsaudiomusic]

Dimana saya dapat membeli alat seperti ini

[@ДмитрийСтупак-я3б]

the link to the board does not work, upload the archive again

[@MrInnovative]

oshwlab.com/sharmaz747/multipurpose-pcb

[@davidkempton2894]

Fantastic! 👏

[@MatterLabz]

Nice job!

[@eroman1982]

Cool

[@stan_yolo]

what about software?

[@ozzaxtone123]

need part list

[@0m1d]

Very nice 👍🏼

[@imranimranibrahim8716]

Very very good

[@spark3167]

I,ll make a bigger version of this!

[@EasyOne]

good

[@geary6723]

Amazing🤩

[@Noah-ek8hp]

Next project: Tesla coil

[@nychthemeronprayog606]

❤️awsm😍

[@safrinapurri280]

Wow kecap

[@shrikantnikam2426]

Ohh great

[@SomeOne-ri1ng]

Dope

[@thelegendex1067]

You make the drawing machine please please please please please please please please please please please please please please please ❤️❤️❤️❤️

[@thelegendex1067]

You want make a Tesla coil big

[@JLowe-uu8lr]

Cool !=8)

[@shrikantnikam2426]

3 views and 6 likes how it's possible

[@serdarcal]

😅😅I dont know

[@Mr30friends]

Likes show up instantly. But the view counter gets renewed once in a while. So in reality the video already had more than 3 views.

[@Yasin.M86]

❤️❤️

[@abdallahdjelal1145]

First....👍👏👍👏👍👏👍👏👍👏👍❤️❤️❤️❤️❤️❤️

[@Iluha111]

Технология Николы Тесла kzbin.info/www/bejne/pYKldGNtlrWlbc0