DIY BACK TO BACK REPEATER USING BAOFENG UV-5R AND CIGNUS UV-85 (VOX NOT ACTIVATED) HOW I DID IT

[@roamingcelt]

Set the receiver side to 145.6MHz. The transmit side to 145MHz. On the user radios, set to 145MHz. In the settings on the user radios set the offset to +600kHz. Now you have a full-duplex repeater that 100s of radios can use. Instead of just 2.

[@striker4125]

Tito gagawa po ako ng repeater ang gagamitin ko pong rx ay icom v8 and ang tx ay baofeng uv5r tito pano ko po kaya isesetup yon? kumpleto na po ako sa repeater cord, hindi lang po ako marunong kung paano gagalawin yung v8... Sana po matulungan nyo ko thanksss and godbless

[@striker4125]

Duplex po yata tawag dun tito kung di ako nagkakamali, yung 2 vhf frequency yung gagamitin

[@dedvtwomyc4762]

kapatid pang china radios lang ito. hopefully makagawa ako ng another video v8 (rx) china radio (tx) try mo itong video kzbin.info/www/bejne/hXjXpWSEeMqLhK8 Part one DIY COR REPEATER, ICOM IC-V8 AND YAESU FT-2980. HOW TO DO IT? at kzbin.info/www/bejne/jX7aq51tmbqrrpo PART TWO DIY-CASING COR REPEATER, ICOM IC-V8 AND YAESU FT--2980. HOW TO DO IT? 080821

[@kurtjoshuabal1714]

Gawa ka basic repeater magiging 1way yan ang rx mo v8 tx mo baofeng hanapin mo cos ng v8

[@striker4125]

@@kurtjoshuabal1714 sige po tito pag may nahanap akong tutorial

[@nikosziogas]

Hi.i did exactly the same but it never worked on vhf wouxon kg-uvd1p... Wi????

[@dedvtwomyc4762]

turn VOX to OFF Check the pinning of the jacks

[@nikosziogas]

@@dedvtwomyc4762 works only with baofeng uv5-r ?? My hands vhf is wouxon and puxing

[@danielhdez5695]

Hola quisiera hacer uno para dos radios baufeng me podrías apoyar con el diagrama del cor

[@suegere]

why used 2k resistors instead of 10k mate?

[@democratpro]

Hate to break it to you, comrade, but a simple 2.5mm to 3.5mm cable is all you needed🤭