DIY Bamboo Flute (Simple and free)

Рет қаралды 685,732

Күн бұрын

Пікірлер: 95

@alicemukami7187 3 жыл бұрын

Super amazing. My daughter had a project in the school. This video really helped me. In fact it was an examination and she passed. She was number one. Thanks alot for posting this video.👏👏👏👌❤️💕

@kingskraft2656 3 жыл бұрын

Glad it helped!

@sanjitrajkumar1405 2 жыл бұрын

@@kingskraft26560

@michellesingh8800 Жыл бұрын

Hi my niece has same project what was the notes on speech help

@derekfrost8991 3 жыл бұрын

Age the bamboo for 6mths so the wood is brown. Green wood is likely to crack.. :)

@kingskraft2656 3 жыл бұрын

Good tip, Thanks!

@jesuscristo2793 Жыл бұрын

If i do it raw, can i just let the flute age to brown ? What's the difference

@derekfrost8991 Жыл бұрын

@@jesuscristo2793 I saw that tip when I was researching flutes, but that was 2yrs ago and I can't remember much about it. If you're testing your technique you don't have much to lose, but if you make a good one, I think you might regret not aging the wood.. 🙂

@evanramee796 Жыл бұрын

@@jesuscristo2793If the wood dries and shrinks around the block, you may end up with a cracked body. By waiting, you will end up wit ha block that is more likely to fit.

@horaciostjeward 9 ай бұрын

How do you control moisture when drying ?

@MrFunnyMint Жыл бұрын

its simplier than I though. I will try to do a small flute necklace that you can wear and play. Thanks

@sidthesloth9411 3 жыл бұрын

This was super cool!!!

@damianmlamb 2 жыл бұрын

I found bamboo behind my house I'm gonna make some lol

@YA_Sxiller Жыл бұрын

thanks bro for this vid i dont have enough money to buy one and kept up the good work

@santiesposito8730 3 жыл бұрын

Wow this was so helpful, thanks so much! I love this design, it's so elegant and simple, sounds amazing too.

@gorgadekoe3878 Жыл бұрын

😮 ❤🤗

@avurtarong7716 3 жыл бұрын

wonderful video, thanks 👏

@thisbunnyquestionspsychiatry Жыл бұрын

BROO THATS AMAZING!!!

@bamboosaxeswebshop 3 жыл бұрын

Very nice and informative! Bamboo instruments are amazing! 🎷❤️🙏

@shurzhetshz3607 3 жыл бұрын

I love it.

@NikodAnimations Ай бұрын

I see, it's a recorder!

@ava2736 2 жыл бұрын

is it necessary to dry out the bamboo or can i cut it down and use it right away?

@kingskraft2656 2 жыл бұрын

I cut it down and used it right away, but I was advised by a viewer it's better to let it dry. Either way, my flute still works today so I am not sure it makes a huge difference. Maybe try making one both ways and see if there is any difference.

@larrent5863 Жыл бұрын

When using things like wood or bamboo to make instruments its best to let it dry. If you use fresh cuttings the material is still bendable, and has the potential to rot if not taken care of properly. When the material does eventually dry out it can constrict on the inner diameter of the instrument causing the tuning to change from when you made it.

@larrent5863 Жыл бұрын

Bamboo is also likely to crack if you don't age it.

@SamWicker-su7rp 3 ай бұрын

Can't u tune those flutes by moving the block in and out?

@cyruskamau5171 6 ай бұрын

How do I do that but it is interesting 👍

@kamb6904 3 жыл бұрын

I am wondering where to get bamboo from

@kingskraft2656 3 жыл бұрын

I was lucky and knew someone who had it growing on their property, but bamboo grows all over the place, I see it on sides of roads everywhere where I'm from. Besides finding it for free, you can also get it relatively cheap from craft stores or hardware stores in most cases.

@avurtarong7716 3 жыл бұрын

@@kingskraft2656 yeah we live in Europe and our neighbors have small bamboo plants

@sachinsankpal4774 2 жыл бұрын

Try Amazon 😂🤗

@twilliam101 2 жыл бұрын

How come my bamboo cannot sound? I followed all the steps. Can this really sound?

@kingskraft2656 2 жыл бұрын

It is hard for me to say exactly why yours isn't working properly without seeing it, but the most likely cause that I ran into also is the wooden reed piece that is inserted in the top not being in the right place. It needs to be fitted in a precise way. To avoid moving it around too much, once I got mine in place I glued it in.

@twilliam101 2 жыл бұрын

Thank you for your kindly reply.

@rowenasvlog1406 2 жыл бұрын

not real sound using me bamboo flute cannot sound why.??

@ur_a_gymbro_harry Жыл бұрын

@@rowenasvlog1406what

@robertbogaert8310 Жыл бұрын

Same problem,?

@idklikeyoucare476 2 жыл бұрын

I tried making but I can't make the reed right

@kingskraft2656 2 жыл бұрын

The reed is the most difficult part of this. It is very temperamental. It needs to be a cylindrical piece of wood the same diameter as the inside of the bamboo and should be the length from the end of the bamboo to the first notch cut. All you need to change is to flatten a side of it slightly so air can pass through. This flattened side faces up. I am not sure how else I can be of help, so good luck, I hope it works out!

@Daddy14100 2 ай бұрын

i did everything but it's not working

@richardlaplant271 2 жыл бұрын

Cool thanks.

@gen091 4 ай бұрын

It cannot make a sound only air need help????

@Ghostlybartender 2 жыл бұрын

Isn’t that a recorder

@robabnawaz Жыл бұрын

The scale is totally out of tune, but you surely could make a correct scale with 7 or 6 holes.

@xtrimbattle 3 жыл бұрын

Please song name please

@aurorabalisnomo1338 2 ай бұрын

It didn't play when I tried to play ito

@ketketchuncristinastudio5015 Жыл бұрын

Uau simplesmente genial 😍

@rowenasvlog1406 2 жыл бұрын

why my bamboo flute cannot sound🤔🙄

@yeet3071 2 жыл бұрын

You may have cut the slot to big or wrong way or may have wood part upside down

@Rsahanpabasara 5 ай бұрын

2:57

@CauaCdd-ez1gf 5 ай бұрын

Qual é onome desse musica

@damianmlamb 2 жыл бұрын

Now how to tune it lol

@larrent5863 Жыл бұрын

You take out a tuner and some wood carving tools. Take little bits off of the holes until it reaches the desired note. However, be warned that if you take too much off your fingers may not seal it properly. If that occurs you have to start over. If you use the same length take a little more off the end of the flute as this can change the tuning as well.

@larrent5863 Жыл бұрын

There are also charts you can look up for the spacing of the holes if you want it tuned easier. The flute he made is not an easy one to tune. Tuning can be a complex process and daunting if your new to instrument making.

@johndarmiento Ай бұрын

you only need 6 holes

@mattnobrega6621 Ай бұрын

I tried all that, but my flute didn't flute. I would say it's a fluke 🤷‍♂️😮‍💨

@guitaristteacobouy Жыл бұрын

I made one, doesnt make a sound

@deepasaxena9760 3 жыл бұрын

Craft

@GuitarUniverse2013 2 жыл бұрын

Thank you, unfortunately you blew it (pun intended) When you began to drill the holes. There is a whole set of rather complicated mathematically pleasious that must be complicated so that your flute is both in tune with concert pitch as well as being in tune with itself. And you can hear it when you play at the very end. That flute might be fun for a kid to play, but it’s not gonna be in pitch when other people try to play together .

@kingskraft2656 2 жыл бұрын

Thanks for the input! I am aware that its not in perfect pitch. The intent of most of my videos is to provide an easy, budget way to make certain projects. The calculations needed to get it in perfect tune are just too complicated for the sake of this channel. Its most definitely not intended for playing concerts. But ill take that into account for future projects!

@ruelytunes 3 ай бұрын

@@kingskraft2656just make a part two or something. nobody wants to play an out of tune instrument

@NikodAnimations Ай бұрын

@@kingskraft2656 No worries, just put up a diagram showing the percentages of the length of the tube that the holes need to be at to be on a diatonic scale.

@maikelchadel9509 2 жыл бұрын

Quanto e lungo?

@palefingers 4 ай бұрын

No working for me.

@duchtdixon894 2 жыл бұрын

I buchi a quanto cm vanno fatti

@PenEi-i9i 6 ай бұрын

ဘာဝါးနဲ့လုပ်တာလဲ

@princessjean2712 Жыл бұрын

Why did our's didn't work we did everything step by step

@BALLERISTHEBEST 2 жыл бұрын

That’s a recorder not a flute😮

@BALLERISTHEBEST 2 жыл бұрын

you play flute on the side

@BALLERISTHEBEST 2 жыл бұрын

Not top

@robabnawaz Жыл бұрын

@@BALLERISTHEBEST who cares?

@alongtzudir1430 Жыл бұрын

Basic ways to make the sound. Don’t waste time to teach others on cutting n sawing parts . The main part is the the mouthpiece where u blow n it make sound. The rest is different need more precision to adjust the keys.