DIY - beautiful round flower pots simply at home

[@MP-fm2ip]

Great template teaching . Thank you so much for your video.

[@sarahernandez8766]

‼️❤️VERY NICE ❤️‼️

[@viviancharbonnet3761]

Good video because I finally learned how to make the circular shaping mechanism

[@TrabajosL3on]

Hola! ✌🏽Saludos desde Mexico 🇲🇽🔥💎

[@retrobuzz1044]

That's an easy way of making a tool thanks a lot . I was looking for a video on how to make one...that makes pot making so much easier ..

[@vijayanmenon6596]

Sir..really nice. May I request u to give ur mob. No so that I can talk to u in details.

[@lizclements500]

Ahah! Now I know how to make bowl jig. Thanks.

[@lonortiz9675]

very nice, would have like to seen it sitting up-right!

[@khaledabdalsalam1990]

You make it look so easy

[@BrightSparkIdeas]

Excellent creativity, I love the simple design and form of the tool used to make such a beautiful pot.

[@joelsomoliveira5733]

Sou do Brasil. Brigado sua ideia é muito boa

[@waleedmusa9118]

very nice and is simple to do it thanks alot

[@DULCESYSALADOS494]

Muy bueno el video, gracias por compartir con nosotros su conocimiento.. Saludos desde Paraguay

[@Julito-hu1cz]

El mejor explicado bendiciones

[@mixedlollies7117]

Very good and easy to follow video, thank you

[@carlabrilhante6260]

Ficou top 👏👏👏👏 Que material é esse do gabarito?

[@Kampup]

aluminum composite material

[@StudioOneNine]

Excellent!

[@wipjenni]

Daaaang, you haters gonna hate! Yeah, it was more than annoying that there was no money shot. Buut, y'all need to understand two things: the water content of any type of cement, mortar, plaster, mud if you will, is relative to the environmental conditions during construction, cure & usage as well as the purpose of the object; annd, using one's foot to hold a straightedge (or to perform other tasks) is no more or less dangerous than using one's hand, iff one has practiced carefully enough and long enough. No worries, I need no chaange back from my two cents. 😉

[@Mocking69]

秀樹感激Goodです=3

[@rosibaquedano4454]

me encanta la tecnica . excelente

[@skn6657]

Where is the final result ??

[@rob_ADXN]

kzbin.info/www/bejne/fn3Omo1oZ7l_fa8

[@adrianbadea1179]

The final result : the pot died 🤣😂

[@pistolpeds]

Great vid

[@unluckyman556]

مان گٸے استاد تیرے جگاڑ کو 😂😂😂😂😂😂❤❤❤

[@anythingispossible1008]

Топ! то самое видео

[@batubatukali]

waiting for part 2 ....

[@LLArtes]

Muito bom👏👏👏👏

[@gossipwithkashifjamshaidawan]

A beautiful thing

[@carlosenriquez2092]

I only have two toes left, however I still have all of my fingers except three.

[@cementcraftideas-diyprojec134]

Amazing

[@ninadelisboa]

Are you serious? What is amazing???

[@DaleDix]

@@ninadelisboa That they had the audacity to post it?

[@ninadelisboa]

@@DaleDix 😂😂 he was very cheeky (or nonsense) to post something like that...LOL He even didn't show how he took that from the ground. Actually I don't believe he was able to lift that up

[@nirupmadhir8528]

He is an able craftsman you have to keep it for 24 hours for drawing and you will find a very nice product using very simple to use and inexpensive to try to understand the procedure

[@nirupmadhir8528]

Drying

[@akeemmayers4255]

Can you send me a measurement of the temple u built

[@paulachampion5744]

Did you use sand or dirt for your mold. Does it make a difference what you use for the mold

[@44xxggaaj]

Use damp sand , so it can stick to itself and hold its forum !

[@Syedbaseermph]

I will buy rather thanks 😁

[@SM-iw8td]

Is that mud or sand

[@dantang65]

very nice,thank's

[@Julito-hu1cz]

Hasta yo aprendi tambien

[@benicio1967]

We watched and didn’t get to see the finished pot. Really really disappointing.

[@leniramartinsalmeida7655]

Essa montagem deu nó na minha cabeça, mais tenho q aprender,ficou lindo

[@mascotasbionicas1223]

14 minutes of video and you cut it right im the end... what the hell...

[@TexPR1]

I wish there was some explanation of what you are using to make this machine/tool with. I can see the PVC but is that plastic or metal or what is that other part and what type of tape or whatever you used on it. Also how long does it take for this pot to dry how many layers do you put onto the thing? How long do you wait between layers?

[@KTO_TYT468]

Что за материал Вы в начале ролика отрезали?

[@gravity7208]

show the final pot but or it was not well

[@marieswann3204]

Where info on supplies or anything?

[@ajayshukla797]

great.

[@rohmczaidan9406]

😀👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🙏🏻🥰🇧🇷

[@Elyfara60]

Incrível !!! Parabéns !!!

[@Jclm7799]

how many mm is the aluminium composite sheet?

[@GilbertFowler-b8y]

Didn't show the finished product

[@ninadelisboa]

Final result: It broke when he tooks it off the ground

[@prernashinde4352]

🤣👌🏻

[@DaleDix]

I would have paid money to see that.

[@katdeville]

That would have justified wasting our time.

[@shobhanapatel4113]

First use screws instead of tap for templet put some grease so the cement does not get stuck and at the end put some kind of plate so you do not have to do the scraping at the end

[@bachtiararif2525]

Indah sekali

[@DaleDix]

Where''s the fing pot?

[@roberthamilton9730]

Although it never showed the end product, it should have ended much sooner.

[@adncr]

Could I give an advice? Please improve your security methods of work... don't cut any material with you foot so near! Or use safety shoes... It's so dangerous... and I mechanic... it means I know a little about it! Well done... beautiful and exact shape!

[@aaronacj]

this is the most intense making of a concrete planter on YT.

[@cleiciamartinelli8756]

Cadê o final do negócio??

[@ninadelisboa]

No final, quebrou quando ele tentou tirar do chão...kkkkkkkk

[@Emenon1]

Can't see the inside of the pot.

[@adelcinapereira1224]

Bom dia por favor diga me a medida desse gabarito

[@rebeccaanderson2907]

Probably a million videos in here showing faster ways to make a nicer bowl.

[@mariofaggiano8247]

As a bigger myself I found this video the more he was trying the more he was distroying he should lifted a little as he was on t hue cement it's to thin layer it will not last it's a shame but good try.

[@viviancharbonnet3761]

What type of sand

[@peterrabson3383]

sharp builders sand, as it holds together better.

[@leewood7017]

Sharp Knife + Toes = No Toes

[@kakakfariz8914]

Comparison of sand and cement please?

[@josejuliodantasdesampaio7870]

Queria como fazer a ferramenta para fazer o vaso

[@ganeshiyer1597]

What was that? Pure waste of time. Where is end product? Why do you make such videos ?

[@ramsajanrajbhar6210]

रामसजन राजभर

[@mayd68]

Can you please give me the measurements ?

[@shobhanapatel4113]

First things you use need to put on screen what size all the tools and name

[@g.summera.p.76]

That is a very careless way to cut. It’s an accident waiting to happen

[@ЮрийПерминов-й4у]

Гениально босую ногу использует

[@prernashinde4352]

Waste of time. Tysm🙏🏻

[@christopherwilson5671]

Mixing that much water into the cement will weaken it too much- it won't last- great effort though!

[@guillermolira2913]

You did no finish

[@craigburns5016]

Wow. An accident waiting to happen

[@mrsw2923]

But what was it?

[@DaleDix]

supposed to be a pot, it probably fell apart when he picked it up because it was a stupid idea.

[@kadirhilauldahlia8774]

Verry long time

[@marineman2298]

No wire/repar type of support in the build = busted pot down the line. Electrical tape to hold the template? May work for this guy on his 1,000th pot but there are better options to make a pot for you folks at home that are no more difficult. Check out Sony Le on KZbin.

[@AJRestoration]

Meh.

[@nv8702]

Чем все закончилось ?(

[@bulbashslava]

Они поженились и жили долго и счастливо.

[@mercedespalavecino4481]

Me fumé todo el video y no muestran como queda?!!!

[@mariabustamante5675]

😂

[@noyhay4763]

⁹город жоб

[@tuonghoalanthitranyc6844]

Kém

[@damianfernando4556]

Que

[@ลําดวนเมืองศรี]

บ😮คึ_🎉จ

[@castillo5o4]

watch them toes

[@HaiDuong-ri9tv]

still inexperienced - too inexperienced.

[@chelosocal8704]

What tha fuck!!!!! Watching the whole entire video and there is not result??? This video should be taking out of KZbin

[@AdenzFK]

Very bad way to end.

[@edithmolina7742]

No sirvió!

[@wasibilgrami7311]

Finally he give up and didn't share the final results 😄 Do you really think we have this much time to make a single bowl which worth is not more than 2 or 3 bucks?

[@richardbaker7557]

watch those toe's.......

[@wichitarunwongs]

Come here, i want to teach you how to make it very simple that you .. 😂

[@TheAsdfg74]

Ну и дерьмище..