DIY Biothane Adapter for Dog Collar and Giveaway No SUB REQUIRED!!

[@dinadavis8864]

Thank you so much for adding all your info, it has REALLY helped me order the correct items!

[@karenM1058]

You have gone to a lot of trouble to make this vid. I can tell how much you are enjoying making these. I make dog collars and leads as well and it was great to watch. Keep up the good work, from Australia down under.

[@coloradocords4paws550]

wow Thank you so much!!

[@kyemajor8024]

i guess it's kind of randomly asking but does anyone know a good place to stream new tv shows online?

[@coloradocords4paws550]

@@kyemajor8024 I just seeing this for the first time and super sorry that I missed it, if your still looking, Lately I have been stuck on Miss Browns Boys

[@taylorannepaisley1342]

So helpful, I was so confused on how to use a buckle 😭 I have procrastinated using them, but this video was super helpful

[@coloradocords4paws550]

I'm so glad!

[@mariapetropoulos1846]

This is a really informative video thank you so much for bringing so much value to this community 💜

[@coloradocords4paws550]

Wow thank you so much for your kind words!

[@samharris6180]

Loooooove those Chicago screws! They are super pretty and last a loooong time! That’s a cool hole punch to I’ll have to look into getting on, I heard another good one is it’s called “the handyman punch” it’s a table one I think.

[@johnwunce7532]

Very informative, I do paracord collars this will be an addition for adjustable collars

[@kimbob271]

Thanks so much for sharing. How do people get the patterned biothane? Been looking for a bit.

[@coloradocords4paws550]

Im not sure, i have not used biothane with a pattern but, you might want to try Paracord Eu

[@kimbob271]

@@coloradocords4paws550 yes I did find them. I’m in Canada so the exchange rate is killer but may try a couple colours. Thanks again for sharing!!

[@prudencekerr6430]

Really helpful, thank you!

[@coloradocords4paws550]

your welcome, if I can help with anything else please let me know

[@Idrockthat]

Great video! Ordered some Biothane for a Diy Dog collar, but the to three different rotary punches I tried didn't do the trick. Will definitely give this one a shot.

[@coloradocords4paws550]

I understand, i tried 2 different kinds and could not get a clean cut. this one might look like it to much but it works for me. please let me know if you have better luck

[@teamjesus2407]

Great video.

[@chicklette17]

How do you clean up the inner material/thread within the holes after you punch the hole?

[@coloradocords4paws550]

You can use a very small pair of scissors you can find them in the sewing are in craft stores or you can use a lighter but you need to be careful with the flam. I have used it on a very light flame but I like the scissors best.

[@poniesatemypencils]

Thanks for this video. I'm getting into making horse tack with biothane and need a stronger hole punch, the biothane bent my cheap leather hole puncher haha.

[@coloradocords4paws550]

Oh no. I did try the leather puncture at first end I can’t even get a cut

[@dlgibson9367]

Great job I did subscribe

[@coloradocords4paws550]

Thanks I appreciate your kind words and for subscribing. If there is any help that I can give you please let me know

[@phrobowski486]

love your work! Im thinking about trying to make my dogs collars. do you ever do rhinestone rivets, if so how do you go about doing this?

[@coloradocords4paws550]

Hi I have never used them on colors before but I am looking into it now and I’m going to order a few things and use some of the materials that I already own and try it out and then I’ll be able to get back to you with a better answer. It really looks pretty simple from what I’m understanding you can use the punch that I show in this video to make the holes to put the rivets in.

[@BioThaneCoatedWebbing]

Great video!

[@coloradocords4paws550]

Really Thanks coming from you that means a lot

[@kimbob271]

Another question, what are adaptors for. Newbie lol

[@coloradocords4paws550]

Hi Kimberly, What I use them for is paracord dog collars. the collar becomes adjustable with an adaptor.

[@kimbob271]

@@coloradocords4paws550 Many thanks, I guess it’s like an extender to making an existing collar adjustable. Got it. Thanks so much!!

[@tianbutler4948]

What size hole punch do you use for you 3/16 chicago screws to fit snugly? Thanks for an informative video!

[@coloradocords4paws550]

Thank you for the kind words 3/16 punch Is what I use.

[@RunYourDog]

Neither the Amazon link to the hole punch or the eBay link to the Chicago screws work. Amazon comes up with only one item titled “Neiko 02612A Multi-Purpose Power Hole Punch Kit, 3/32" x 9/32”. Is that the one? Thank you

[@coloradocords4paws550]

Sorry about that The screw -- www.ebay.com/itm/Chicago-Screws-Concho-Nickel-3-16-10-Pack-3305-01-Screw-Post-Stecksstore/201464920736?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 The punch -- www.amazon.com/Neiko-02612A-Multi-Purpose-Power-Punch/dp/B0002T87CW/ref=sr_1_fkmr0_1?dchild=1&keywords=Neiko+02612A+Multi-Purpose+Power+Hole+Punch+Kit%2C+all+hardware+in+-+3%2F4+inch&qid=1599363140&sr=8-1-fkmr0 Hope this can help

[@Abby_J_19]

Where do you buy your hardware form? Buckles, d rings, ect

[@coloradocords4paws550]

amazon and ebay

[@chanellim4661]

Hello. what is the colour code for the blue? Thankyou.

[@disco324]

Thank you for your video

[@coloradocords4paws550]

sure let me know if i can help with anything

[@lizjoe21750]

Will you please tell us the depth of your Chicago screws?

[@coloradocords4paws550]

Liz Joseph sure. They are 3/16 of an inch

[@coloradocords4paws550]

IM super sorry to who ever let me know about my links I removed you comment on accident I am fix them now

[@cadencecarter4924]

Your good!

[@cadencecarter4924]

Also, can you attach this to a prong collar? just wondering!

[@coloradocords4paws550]

Cadence Carter To be totally honest with you I don’t think it would work usually the prong collar has the Martingale on it if you want to take that martingale off the chain then yeah you probably could use it on there you just have to hook it up

[@cadencecarter4924]

@@coloradocords4paws550 oh, ok! I still have some paracord collars that would love some adapters :)

[@lorenaayala6181]

what is the thickness of the biothane you used, is it ultra thin or beta standard

[@coloradocords4paws550]

beta standard

[@laubecker4]

Hi, which material are the D rings and buckle? Thank you 🌺

[@coloradocords4paws550]

The D ring is hat you dog tags and leash hook up to and the buckle is what is at the end of the collar that you just the sizing for your dog to wear.

[@laubecker4]

@@coloradocords4paws550 yes, i know. But which Material are they. Thanks

[@coloradocords4paws550]

​@@laubecker4 nickel plated metal

[@laubecker4]

@@coloradocords4paws550 trank you ❤️

[@yohana03]

Can you share a link from where you order your rings D and square?

[@yohana03]

And buckled too please? Thank you for all the info!

[@coloradocords4paws550]

buckle - www.ebay.com/itm/3-4-Nickel-Plated-Dog-Collar-Double-Bar-Buckles-Pack-Of-10-/114330924105?hash=item1a9ea77449 I am not able to get the link on amazon but you want to look up Dog Collar D ring 3/4 for the square ring look up dog collar 3/4 square ring Sorry I was not able to do more

[@yohana03]

Thank you!

[@alexandralavigueur624]

Hey where do you buy your hardware?

[@coloradocords4paws550]

Amazon and eBay.

[@zulikkowalski3547]

What would you use this adapter for?

[@coloradocords4paws550]

Dog collars or you can also use them for a belt.

[@zulikkowalski3547]

Colorado Cords 4 Paws but why would you need to attach it to your dog collar?

[@coloradocords4paws550]

@@zulikkowalski3547 using adapter makes the collar adjustable. Colors that I make that don’t use an adapter are used with a quick release buckle and you cannot make that adjustable

[@leeyabustle6194]

@@coloradocords4paws550 would you do a video on how to make the ones with buckles 😍 pretty please

[@coloradocords4paws550]

@@leeyabustle6194 Yeah I think that would be a great idea are you talking about the quick release buckles right

[@Graeme758]

That punch is waaay over the top. just an ordinary rotary punch will do the job easily. It's lighter, can easily be used one handed and has better leverage too.

[@coloradocords4paws550]

I tried a leather punch and it did not work for me, it just dented the bio thane. Many people will use an electric drill but it's not a very clean cut That is why I recommend the heavy duty hole punch. Because Bio thane has a nylon webbing core some will also use a heat punch but I can recommend that because I have never used one. Also so will use an air puncher but again I am not familiar with it. The heavy duty punch has worked for me with little little clean up

[@miettecraig1477]

Colorado Cords 4 Paws I just got biothane and realized how hard it is to punch with a regular rotary punch! I could not do it, so I’m looking at videos to figure out what kind of punch I need 😅

[@coloradocords4paws550]

@@miettecraig1477 I got my heavy punch on amazon if that helps it was not very prices.