DIY Bubble wall | easy colourful LED water bubble wall | JOY in DIY

Hello everyone,
In this video i made DIY bubble wall.
you can make this to decorate your home, n make it look more colourful.
this is really easy, budget friendly, attractive, beautiful and relaxing.
the rainbow colors add beauty to your house in dark too.
You can buy air stone , air pump, aquarium tube, 3 way connector in aquarium shops or buy through below links.
Things required,
polycarbonate sheet.
Air stone. Buy link - www.amazon.in/dp/B076FJYRRF/r...
Air pump. Buy link - www.amazon.in/dp/B010ND24E8/r...
aquarium pump tube. Buy link - www.amazon.in/Foodie-Puppies-...
3 - way T - connector. Buy link - www.amazon.in/Petzlifeworld-A...
araldite. Buy link - www.amazon.in/Araldite-Standa...
M-seal. Buy link - www.amazon.in/M-Seal-89018600...
sand paper.Buy link -www.amazon.in/Designers-Den-S...
LED Strip. Buy link -www.amazon.in/gp/aw/d/B08LQW5...
You can also buy air stone,air pump,aquarium tube,3 way connector in aquarium shops.
To watch our previous videos,
• Stocking flower branch...
If you like this video like,share n subscribe.
If you have any queries comment below.

[@77icky]

I love the waterfall wall. This is exactly what I want for my bedroom. I'm doing a forrest theme with a waterfall. Thank you for this video.

[@overtheedgecustom2148]

I used your information to build a wall 24 inches wide and 48 inches tall, your information was extremely informative, thank you. I found the design has a couple short comings I think I have fixed. The first is that the recommended air-stone does not give a consistent bubble pattern, some chambers had larger bubbles than others. I changed to a man made air-stone (TOP FIN BUBBLE WALL) is the brand which has very consistent bubbles. Second the design does not allow you to fill the chambers to the top with water, because bubbles rise up several inches above the water level and spill over the side leaving everything wet. I glued a plexiglass strip to the top making a cap and sealed it air tight. Then I drilled small holes .060 diameter in the cap centered on each chamber. This allows the chamber to breathe and does not allow the burst bubbles to come out. Additionally, I drilled one larger hole on each side of the new cap big enough to allow filling and put a plugin the hole that has a small hole to allow the plug to breath. This allows the water level to be within one inch from the top without bubblles spilling over the top. Last comment is GOOP brand clear adhesive seals everything peerfeectly without the needed to use any other adhesive. It is readily available in big box stores or on line. Thanks again fun project to build.

[@JOYinDIY]

Thanks a lot😄😄

[@lawilliams3396]

Thank you for that!

[@prashant.kr.yadav81]

Plz made a video

[@prashantbhagat7218]

Can we made this for 4x7

[@kishencristal9913]

I need your help bro

[@tsrinivas2406]

Very Cool Idea. Thanks for Sharing.

[@JOYinDIY]

thank you😊. stay tuned.

[@Tech-Random]

Looks like a beautiful display piece! How loud is the air pump? I'd love to build something like this for my room but I don't want an annoying buzzing going all day

[@JOYinDIY]

Thank you😊.we used aquarium pump. If you have an idea about aquarium you may know it's sound.

[@sagottv6624]

Wow nice creative lamp.thank you for this tutorial👍👍👍

[@keerthimoses2441]

Hats off to all your efforts.

[@JOYinDIY]

thanks a lot 😍

[@j33t52]

Great and informative video. Thanks for sharing. Could you confirm how much it will overall cost and time to built this? And man power too?

[@sohailkhan-yi5is]

Zabardast, mind blowing

[@JOYinDIY]

Thanks a ton😄

[@maval4537]

Brilliant!!! I always wanted a water panel, but they are so extremely expensive... This is the perfect solution, thanx a lot, its beautiful!

[@JOYinDIY]

Thank you so much😊😊

[@LittleButterfly23]

Wow beautiful I love this...

[@JOYinDIY]

Thank you so much 😁😁

[@wildstar6810]

hello JOY in DIY! i have discovered your channel today and all the work you have done is really worthwhile to watch. but i have a question! im building the same thing but for a size of 5X5 sq ft area. and the air stone is of only 12 inches!! is there any way to extend air stone?

[@vishnuvichu2023]

Thank you very much for sharing your ideas

[@JOYinDIY]

Our pleasure 😄😄

[@VideoweltDanielHagemann]

absolut wonderful

[@kathybray7156]

Wow now that's true beauty love it so cool ❤❤❤😂😂😂

[@bintangsmule1995]

Sangat keren lampu hiasnya.

[@vinaysnapper3448]

Nyc Akka..👍

[@JOYinDIY]

Thank you so much😃

[@ma.antoniatoscano665]

Excelente trabajo , nada laborioso felicidades desde Guadalajara Jalisco México.

[@sunitarathore4751]

Wonderful idea

[@vivekwagh3623]

Really nice video but where from I can get polycarbonate sheet? Please suggest.

[@jualbelisewaproperti2662]

Awesome work

[@JOYinDIY]

Thank you

[@adminsroserobertson]

beautiful 👍

[@JOYinDIY]

Thanks a ton!!!!😀😀

[@ngocp.8201]

Look very nice, just wondering... can you make the bubbles in a bigger size?

[@JOYinDIY]

Thank you 😊 Size of bubbles depends on airstone..however small bubbles look good to that wall thickness..

[@rainbowadsinteriorsnellore8813]

Awesome design and concept. I have a question in mind, how do we connect the led strip wires and from where do we get power, please show any videos how to connect and complete the circuit. Thankyou

[@JOYinDIY]

Just connect the Led strips to adaptor

[@MrRajinig]

Sema super sir well dome

[@JOYinDIY]

Thank you very much😊

[@aleks-s1442]

Очень Красиво!!! Look

[@JOYinDIY]

😊thankyou

[@rajendrapawar3996]

Beautiful 😍

[@CherrySteinz]

This is excellent! Be careful with that M seal though, I don't know anything about that product directly but it seems very similar to other 2 part putty and typically you must handle those with gloves for safety! Any other viewers might wanna double check the package just in case!

[@JOYinDIY]

Thanks for the tip!

[@shrinivasharani2558]

Hi it's really good but water not leak in the machine side and how much cost it is

[@mitalikarmarkar662]

Very very good work 💥it

[@JOYinDIY]

Thank you so much

[@raghuram9249]

Wow superb frnd

[@JOYinDIY]

Thanks a lot😁😁

[@geetanjalibiswas3655]

Absolutely love your creativity, I'm so glad I found your channel. Will recommend it to my family and friends, we are all crazy DIY people :)

[@JOYinDIY]

Thank you sooo much for your lovely comment 😍..sure recommend our channel n stay tuned..😊

[@ricardonieves8136]

How do you maintain the water?

[@ngocp.8201]

Look so NICE and BEAUTIFUL... How strong is that AIR PUMP to get all those bubbles up? 40 gallons, 60 gallons, or 100 gallons pump?

[@JOYinDIY]

0.15 Mpa is enough for pumping air pressure.

[@samathapriya5960]

Very nice 👌👍👍

[@JOYinDIY]

Thank you

[@jackiephan1724]

I just have a question. So if you turn off the power how the water will run back the blower or no?

[@eveshaw5614]

Question can I use mineral oil instead of water? Also can a small table top one be made? Thank you for the fantastic demonstration...

[@JOYinDIY]

Thankyou😊.You can't use mineral oil. I think bubbles won't form in a good way and yes you can make a table top one.

[@bbvinesking5383]

Wonderful 💎💎💎💎💎

[@JOYinDIY]

Thank you!!!

[@sharvinkamble3958]

I've made the same model with sheets of 1 feet after applying mseal and araldlite still leakage is happening idhar navratri ke 9 din baad bhi hoyega ki nhi bhaya

[@gailhambright4962]

I want to make it 3 ft long how or where do I get the air stone that long to use?

[@rohitanand8548]

Hi...it's an amazing work...it looks beautiful...I want to make, just assist me with few things. Can I make it 5 feet(height) by 7 feet. And if I have to buy locally where to look. Thanks in advance.

[@JOYinDIY]

Thank you😊 You can make two seperate bubble walls of 5×4ft each Because the maximum size of air stone available is 2 feet.

[@rohitanand8548]

Sell will ship me the desired size

[@oxomrhinogaming6972]

Bro can u provide me polycarbonate sheet 4*6 ft size. Plz

[@onegigattcorporation374]

Can u me build 6x10 outdoor glass water falls

[@bhavanasameera5537]

Where u bought poly carbonate sheet

[@techclusive8419]

Can you tell me the size in square feet you have used polycarbonate sheet for the bigger bubble wall you made? Please do reply...thanks in advance

[@JOYinDIY]

It is of 1 feet × 5 feet.. i.e,..5 square feet each. I made two of them.

[@Nishantkumar-jt5qo]

This is so cool work. I am going to try this soon👍

[@JOYinDIY]

Thankyou😊..sure, try it!!

[@tejasvikumar7478]

From where i can buy polycarbonate sheet plZZ help bro

[@abhijitsansare4660]

I cant faaind this polysheet pl suggest मी any option buy link

[@nenolima5595]

wowww.. nice! I will try mine.. but I saw in the end you got big one, where can we buy this sheet? so cool so great! I am from Brazil. I got doubt too... After to use in the bottom the air stone all pressure of water wont make it go out?

[@JOYinDIY]

Thank you so much ..and your doubt, leave some Gap on top after filling water and water won't come out

[@NurlailahManoga]

Thanx for this video

[@JOYinDIY]

Our pleasure😊😊

[@sudiptasaha9407]

Can u help me for set up?

[@ART_INDIA]

Awesome 👍💐⭐🤘

[@JOYinDIY]

Thankyou☺️

[@Ud3y]

Can you please tell me where can i find polycarbonate sheet? Its not available online. If possible please share the link

[@sayedaahil4266]

Sheet link pls ? I wanna make it as soon as possible

[@ChandraMCraft]

Amazing

[@JOYinDIY]

Thankyou😁😁

[@shaikhriyaz5073]

This is very beautiful can sir can u make for me I'll pay for this ..plz reply

[@arthembautista8370]

Hello! If I may ask , is it possible if you can make one for me? And how much ? I want the one that stands on the floor

[@heshamME]

please. What is the name of that basic board. And where I find him

[@shrinivaaskota73]

Can you provide me the link from where i can get the polycarbonate sheet

[@MalaiMusic854]

polycarbonate hollow sheets kahan se online kiye the

[@akshaymurteli4473]

I wanted to build same for 3x3 ft wall. U used bubbler as air stone but if for 3 ft do you have any suggestion? And after some days air stone may get block due to water impurities so how can we replace ?

[@JOYinDIY]

For 3ft you can use 2 airstones.one of 24inches and one of 12 inches. They are also available online. If you pour distilled water,airstone has less chances of getting blocked.

[@archanabalodiya9672]

total kitne ne bn jayega ye

[@praveenchute6114]

Super sir ji

[@JOYinDIY]

Thanks a lot😊😃

[@m.yukeshkumar0087]

Nice information than others video about bubble wall Awesome work My requirement is of 10.5 inch air stone of 10 inches is not available suggest me if you have any idea

[@JOYinDIY]

Thank you😁😁 Try to use 12 inch airstone..and you can seal the left out part of airstone with m-seal.

[@m.yukeshkumar0087]

How to remove water from the bubble wall

[@JOYinDIY]

just remove the pipe from airstone.

[@srikanthj3458]

Nice 👍 I am planning to do and I want to know what is the sheet thickness you used for this work ..?

[@JOYinDIY]

It is 10mm twin wall hollow polycarbonate sheet.

[@srikanthj3458]

@@JOYinDIY is it twin or thin please confirm

[@JOYinDIY]

@@srikanthj3458 It is twin wall ....also called as multi wall polycarbonate sheet.

[@raminaidubora7807]

@@JOYinDIY where we can buy it

[@user-vi3ox6lu1x]

Where to get the polycarbonate sheet from ? And what's the approx price ?

[@ankurchourasia3260]

Very good work, appreciate it. How can we cover both side portions of polycarbonate sheet to make it look attractive and hide the Led that I am planning to place vertically. Will be great if you have the online link for same.

[@JOYinDIY]

Thank you 😊 You can use aluminium strips to cover sides

[@ankurchourasia3260]

@@JOYinDIY thanks. What else works best instead of Air Stone/Stick that you used in this video. I used the same type of stick but they are very delicate after sticking once the water fills in. Also used an Aquarium pipe and made holes in it but it doesn't works as expected. I have 4 by 6 feet polycarbonate sheet. Anything else we can use that works best, will be great if you can share the link for any alternate material.

[@JOYinDIY]

Airstone is the best option. Use the one we used in our video. It works very well.

[@tejasdinkarbhosale9266]

@@JOYinDIY mam please give me this

[@robinnewman734]

You can frame it out with dark wood, or metallic gold for a more elegant look.

[@dhirajjaware5208]

Brother can we use glue sticks with glue gun instead of m seal on stone filter please tell means to stick carbonate sheet with stone filter can we use glue gun glue

[@cathysnider8283]

I want to know how much they cost

[@prithibisundarps]

wowwwww nice.

[@JOYinDIY]

Thanks a ton

[@ganpatidecorationideas3168]

He joy can you share link for polycarbonate sheet link pls and i want to make it in size of 48*48 pls help

[@chetanborkar9397]

Thanks for the information you shared.. it's nice .. from do I get polycarbonate sheet?? Link pls. ..

[@JOYinDIY]

dir.indiamart.com/impcat/acrylic-bubble-wall.html

[@moradmohammad7025]

Thank you for this great job. Can I use alcohol as an alternative to water because the water will become algae in it after a period of time?

[@cryora]

Probably but better to use lower concentrations or it will smell / evaporate faster

[@JOYinDIY]

Thank you 😀 You can use distilled water..it have very less chances of forming algae

[@moradmohammad7025]

Thank you for the advice and response 🌿⚘

[@manishamte4204]

Where cn v get the polycarbonate sheet?

[@parmarks9705]

Beautifulllllll🙏🙏🙏🙏❤️❤️❤️❤️❤️❤️❤️❤️❤️ Love from Karachi Pakistan ❤️❤️❤️❤️❤️❤️❤️❤️

[@JOYinDIY]

Thank you very much😊

[@richauppal5050]

is it avilable in punjab..i want this

[@souravsonlinemathematicscl5723]

Can you make one product like this for me?

[@julianajimmy7995]

Genius... but one question on my mind... when the waters get dirty and causes algae for long period... how to wash it?

[@JOYinDIY]

Thank you 😊. If we pour distilled water , it doesn't get dirty and have less chances of forming algae. And keep replacing the water once a month.

[@ssharma1304]

@@JOYinDIY I was looking for it sooo long. Thanks. Fr DIY . Let me try for my home. I ll share pic for you after lockdown

[@JOYinDIY]

@@ssharma1304 sure try it😀

[@sanatpanda1992]

Nice question dude

[@cryora]

Make 5% alcohol and 95% water mixture and you only need to replace water every 90 days. Formula for making 5% alcohol from 100% distilled water and 70% IPA is IPA = 0.073*DW

[@praveenmasky2818]

sir pls tell me how to buy that polycorbon sheet... ur given link only bulk quantity providing

[@JOYinDIY]

Contact us through mail [e-mail] We are selling (polycarbonate sheet only) Let us know Where you stay? 1ft x2ft (1ft L * 2ft H * 10mm thickness) polycarbonate sheet(only) costs Rs.300 +delivery charges.

[@shaistazareen3867]

Nice thanks for mentioned items address

[@JOYinDIY]

Your welcome😁

[@hitendrac6]

How to by polycarbonate sheet?

[@sakshichavan6228]

Can we get on rent or any idea where we will get on rent this decor

[@varshabhagawat4045]

Led light kaise lagayi side me usko chipkaya hai kya

[@AkashDas-gu5iv]

Where to buy polycarbonate sheet?

[@bidyuthazarika4327]

Thank you

[@JOYinDIY]

😊

[@kientobe5316]

Mk ở đâu vn ạ vs cho e hỏi chất liệu vs ạ

[@MrScottytoohottie]

It looks nice. I wonder if you can use oil instead of water?

[@JOYinDIY]

Thankyou😆😆 Nooo!! Use distilled water..to avoid damaging the transparency of wall

[@MrScottytoohottie]

@@JOYinDIY Oh ok. Yes so no mineral building hazes the glass, or plastic walls. Lava lamps use oil though, and they look pretty good. I wonder if there is a good blend mixture of water, oil, food coloring, etc. that could be used to enhance the effects?

[@JOYinDIY]

Ok but using LED lights will give you good color effect..try it😊

[@vivekkadyan6330]

It's awesome, I will also try it. Btw, why didn't you fill the water upto the top in the bigger one??

[@JOYinDIY]

Thankyou😊😊. You can fill water till top but leaving 5-7 inch gap.

[@adi27588]

awesome :)

[@JOYinDIY]

😀😁thankyou

[@BhavarthPatil-rh5xj]

polycarbonate sheet price

[@mangoaam9933]

Hi can I make 6feet x 1 feet wall using same material mention in description or should I need anything extra? You wall looks very awesome

[@JOYinDIY]

Thank you😊 . At the end of the video , you can check our 5ft×1ft wall . You only need polycarbonate sheet and led strip extra according to your dimensions.

[@mangoaam9933]

That's great. Thank you.

[@solomonwachira133]

What about the airstone? Should you get one that fits the 5ft length?

[@JOYinDIY]

@Solomon Wachira Yes. You should buy.

[@pranitchorghe2568]

Sheet buying link please

[@user-jf3ep4z104]

I have self made a air stone from a nylon pipe but his come not far the bubble i do know how that can i 43cm long with my pipe

[@shreeyog1896]

Price of polycarbonate sheet?

[@mathangianil6120]

Super

[@JOYinDIY]

Thank you so much

[@samozain1772]

I wanted to know the name of the material that you did this waterfall instead of getting glass, and whether it was plastic material or not, instead of glass.

[@JOYinDIY]

We used polycarbonate sheet, it's a type of acrylic material.

[@mildreytrochemendez4965]

Quedó superhermoso. Tengo dudas.estamos haciendo en casa uno igual.usando policarbonato igual.las medidas son 1.50 de alto y ancho 78 cm.mi pregunta es a que altura maxima debe estar la bomba de la manguera.pq lo pusimos 2metros separados y echaba pocas burbujas y de pronto solo echaba en el medio por un solo hueco.favor responderme..

[@JOYinDIY]

Can i know the height of wall? 1.50 feet or any?

[@mildreytrochemendez4965]

@@JOYinDIY buenas.1.50 metro alto y 78 cm ancho el tamaño del muro de burbujas.pero el compresor lo tenemos encima del techo para esconderlo y no se viera feo

[@VijayKumar-eb2uv]

So nice

[@JOYinDIY]

Thankyouuu😁😁

[@Rishyasringan]

Bro i want to buy it?

[@RehanKhan-lu2vn]

Wow

[@JOYinDIY]

😊😁

[@anoopsharma1561]

Mujhe ye sheet chahiye...knha milegi?