DIY Budget LS Turbo Manifold Build - Part 3

[@dougycarter9399]

In Australia we have a saying, " I take my hat off to you " for someone how has NO idea you are not afraid to give it a go,, and your Tig welding has improved too, well done, I enjoy watching,,

[@superduty4556]

I think that saying is universal to the English speaking western world. Lol

[@avry87]

@@superduty4556 I wanted to say the same thing, but then I've seen your comment, we have the same saying in Romania too 😂 so it must be universal 😂😂

[@kobraballer]

sometimes when your welding thicker metal with a bigger bevel on the end you need to make multiple passes to fill that void back up. On thicker metals doing what your doing is how you get better penetration into the metal to make the weld stronger. your doing fine

[@jpwdowiak]

It’s so awesome knowing where you guys have car meets in Fort Mac, I have stopped at that scale countless times 👌👌

[@michaelclarke2497]

Don't know if you know, for anyone starting to weld they can use the double rule the cup size x2 is how far you "can" run your tungsten out and how much the gas you should be using , once you get more experience you can push these values, this is just a guide to save fucking tungstens and using too much gas, which saves money 👌

[@Boostedlifestyle]

I knew though CFh double the cup size I didn’t know the tungsten one

[@e34boat88]

dude you are living the dream.. i wish i had tig welder

[@Boostedlifestyle]

It was a great investment! It’s so fun!

[@Sloppyjalopy123]

Nicely done, looks good and strong.

[@Boostedlifestyle]

Thanks sir !

[@devonshannon51]

Your a awesome soul bro.. Seem like a really chill guy

[@Boostedlifestyle]

Hey thanks ! Means a lot

[@CyborgbobaFett]

Should work great! Maybe even bolt on the gasket to see if you can port em any nicer. Cant wait to hear some boost with all the new chu chu parts!

[@teamdrama6251]

Pre heat the thick flanges with you propane torch. Your doing great looks good .you need a tig finger from jody at welding tips and tricks .fine job

[@ChrisTheMobileMechanic]

Looks good man, you are giving me drive to try this myself. Keep up the good work

[@Boostedlifestyle]

Its seriously not that hard

[@TheMick26]

What's up, Kyle? Look at you trying new techniques to fill those gaps when your welder might otherwise be underpowered for the job. Your dipping and weaving look pretty damn good there.👍 I like your bucket seat upgrade in this episode (bought two more buckets)😅 Hey, it works, so I like it! Also the steady rest for your hand seems like a pretty good idea that I haven't seen before. Now you should make a couple of those 3rd hands. They are so handy to have. Bro, when you said, "I did shave mah-face and mah-head", it was in V's voice.😂😂😂 Nailed it! That 2JZ Lexus bangin' gears at the end sounded sick! The Silvia boys ain't playin' around either. One last thing... all the OG fuckboys may recognize insta_jord who I believe once played the role of the homeless guy at the track.👊😉 Maybe you can show us his swap when it's done. Cheers, homey! 🙌#teamraceteam

[@cvaracing7070]

Lookin great bro keep up the great work.

[@WelcomeToTheMadness]

Four-five more hours off that 10,000 hours. 👀

[@sled1racer]

nicely done!

[@joep1253]

Looks good Kyle, are you gonna build a new crossover? That should be easy for you now

[@Boostedlifestyle]

Yup around the back of the engine 👌

[@jaluna06]

Awesome job. That looks great. Keep up the awesome vids.

[@ThePryapizmC]

Looking good Kyle!...lovin your log 🤣 10:38 ...that's what she said

[@revo4tecmike]

Looking good! And the manifold is looking good too! Do you plan on machining the gasket surfaces? Id at least check em with a straight edge.

[@Boostedlifestyle]

Yeah I might hand sand them flat

[@Reject06]

Getting gooder!

[@VanLifeKen]

hell yes keep it up love the diy

[@grantadan]

Where did you find the tubing material I want to do all most the same thing

[@jbuch66koop]

I haven't seen but has anyone recommended using 2 filler rods at a time before? Some people use 2 at a time to help with filling larger gaps

[@jbuch66koop]

@seth saia Sir, that's stick welding, not tig...

[@devious762]

Josh Buchanan if you need to use two that means you need to size up on filler rod you really shouldn’t have to use two

[@GodfathersAdventures]

Nice welds !!

[@chuckwilke9875]

Hi If the hole saw stops cutting check the teeth if just one is gumed up thay stop cutting.

[@xRSAkingx]

That's a nice noisy boy holder you got there...

[@Boostedlifestyle]

Only the best for Beijing bearing beater

[@xRSAkingx]

@@Boostedlifestyle straight dabbing on the fillers too! 👌

[@madmod]

It's safe to say I'm going to try this on my turbo 2v. Keeps a stock driver side manifold and makes for a super simple crossover and awesome turbo placement. Mmmnyess

[@justinfryer1347]

who said it was safe...

[@bmcunning]

if its in a mustang it isnt going to fit, you only have a max of 5to4 inches from the header flange and there is barely any room for the crossover pipe in the back

[@madmod]

@@bmcunning the crossover would dump down and around by the Bell housing. Would have plenty of room. I've seen several forward facing headers for my chassis and this will work fine.

[@justinfryer1347]

@@bmcunning a real fabricator will make it work..

[@bmcunning]

@@justinfryer1347 a real fabricator would just do a foward facing kit and not use schedule 40 pipe

[@harris0ae86]

Get a air hammer n open the pipe for the flange

[@DONTCALLMETHAT]

I'll buy it. What's your cash app bro? 😂😂😂😂😂😂😂😂 Nice job man

[@notengokidney]

who sells that manifold kit?. I need it for my project

[@Boostedlifestyle]

loskey Garage blacksheepindustriesinc on Instagram

[@haydenmorin1821]

Safety glasses under safety hood extra safety🤣🤣

[@mwiseman060606]

How big is ur argon tank? I have a 300 cubic foot tank and it cost me 120$

[@Boostedlifestyle]

I dunno it’s like 4 feet tall 😂

[@samuelchartier3684]

Diy adjustable welding seat!!!

[@pbmachines972]

Dude your doing more than me I just work on other people's shit

[@donnie1581]

Way less intimidating. Now to figure out how to build it at work without getting in trouble

[@gettinbentfabrication9073]

It’s called Putin a cap on it

[@douglaslila9825]

Starting to drop dimes sometimes!

[@brandonrohrer7914]

Why are you not hitting it with a wire brush. In a pipe welder you need to knock off the shit with a brush

[@brandonrohrer7914]

Root fill cap

[@martinj9251]

Back purge it

[@turboman351w3]

o boy canada

[@joshneuenfeldt7209]

What the hell is the point of leaving the back of the manifold open? This is like, way wrong. You’re just gonna let the exhaust go out?

[@Boostedlifestyle]

The drive side header is gonna join up to that