DIY Cellular Remote Controlled Hog Trap

[@inquisitive_stranger]

I've watched so many videos on this and I can say that this has been the top..... Easy to follow and straightforward... Thanks

[@willeo6]

can you show are put a drawing of the wiring system how everything is hooked up

[@smitthone]

Great project with off-the shelf parts!!

[@dsnicker9719]

Great, but does it work????

[@jeremygardner8870]

Update? Did you get any? How many at a time? What happened to trap? Did it work? Did it not work?

[@bobbygore4832]

Can you detail descriptions on the equipment for someone who doesn’t know where to get the parts. Thanks

[@ItAintMeBabe99]

Thanks for making this video. It’s ingenious !

[@karalewis2908]

Hello sir thats awesome video.Want to purchase unit but wanted to see what you say about how easy to install?

[@karalewis2908]

Love your video! Dose that gsm monitor have to be programed or out the box put sim card in and call?

[@umpquawildlife3667]

Are you able to send a text command to that cellphone trail camera to take a picture?

[@elizabethlee3864]

This looks like a great setup. Thanks for taking the time to share it. Is it possible for you to either do a follow up on the wiring part or email me the steps? Thank you.

[@JSROutdoors]

kzbin.info/www/bejne/e5mop4CtfJqVl80

[@scottmoore5719]

A modified set up like this would work great for raccoons around protein feeders too I bet.

[@wademercille5685]

Can you show all of the wiring going in and out of everything?

[@ronsmith1364]

Can you do a followup? the fencing seems a bit low, some of the trap videos have shown them jumping 4' with an anti-escape lip, I think it was called hogdinni Nice diy tho thanks for sharing

[@JSROutdoors]

kzbin.info/www/bejne/e5mop4CtfJqVl80

[@doncale2088]

One white wire on the double pole switch seems to have come loose. Will this still function? Don in Nova Scotia.

[@chrislarrieu8300]

I have a bad hog problem on my property and would like to see if I can get you to send me a material list, directions, and a wiring diagram if possible. I'd appreciate. Thanks

[@chrislarrieu8300]

[e-mail]

[@GeorgiaGrown81]

Can you link parts needed for the build?

[@cookmillington6227]

I bought the gsm box but it’s not supported by 2g. How is yours working? Mine doesn’t work. I’ve only got 3/4 g.

[@shanesandhoff3932]

I would like more info on wiring this thing.

[@JSROutdoors]

kzbin.info/www/bejne/e5mop4CtfJqVl80

[@donf3739]

I would use smaller-spaced fencing at least a couple of feet along the bottom. Those 6" openings will only filter out any trapped piglets, which will grow up to be big, trap-shy pigs.

[@crossaaranch9113]

Good morning Danny - I printed off the wiring specs and items needed to build but can’t find info on cell ph receiver and where to purchase . Can you give me that info ?

[@jordanclark7687]

Is there anyway to contact me? I’ve having serious issues setting mine up lol!!!

[@markbiddy397]

Do you also pay a monthly fee for the device in the box that you called that sends the signal to the actuator? What gives it service?

[@JSROutdoors]

kzbin.info/www/bejne/e5mop4CtfJqVl80

[@ericbayou1289]

When I look online at the gate opener, none of the are 12v. Only household plug in. Did you have to rewire or modify? Please let me know, have everything ready to build.

[@JSROutdoors]

kzbin.info/www/bejne/e5mop4CtfJqVl80

[@johnfrazier8000]

where are you located and what cell network are you using?

[@JSROutdoors]

kzbin.info/www/bejne/e5mop4CtfJqVl80

[@lonesomeroades]

Who did you go with on your 4g gsm receiver?

[@mabethea]

Having trouble with the RTU5024, help please. Can’t get signal to connect, any advice would be great.

[@justinforrest7387]

Would like to know how you got a SIM card with phone number for this?

[@JSROutdoors]

kzbin.info/www/bejne/e5mop4CtfJqVl80

[@johnlee8026]

Help with SIM Card. Was told by T--mobile/At&t that SIM card wont work as you describe because there is no Equipment ID number in the RTU5024 cellular relay. Did the TracFone prepaid SIM card get around this serial number issue?

[@jackdeason4445]

did you get an answer on sim card

[@jimmyhernandez4010]

Nice project, could you post a diagram of your wiring or possibly email it?

[@JSROutdoors]

kzbin.info/www/bejne/e5mop4CtfJqVl80

[@DGA2000]

Clever. Thanks for sharing

[@josephlipps1307]

I bought the RTU5024 switch along with a sims card(alarm sim) from Amazon I have been unsuccessful with communicating with the switch I’m not sure what I’ve done wrong I activated the sims card and installed it has a 19 digit number I’m not sure if I’m plugging the correct numbers in before the 19 digits should I put in 01, or 001, or 011 for the country code also what do I put in in front of my authorized number any help would be appreciated

[@JSROutdoors]

kzbin.info/www/bejne/e5mop4CtfJqVl80

[@michaelbooth3355]

Can you buy a sim card by itself or do i get a phone and remove it

[@jackdeason4445]

hey did you get a answer about the sim card

[@gentoonix]

alarmsim.com/home That’s what I use, I’ve built quite a few of these boxes. A bit different than this setup, but same GSM relay box. Alarmsim is 5$ a month for 250 mins, 250 texts and the box doesn’t use any mins. They have other plans the 5$ gives me unlimited triggers per month. You don’t have to use a phone to activate. Just enter the SIM card number and payment details on the site. Can even buy the cards off Amazon.

[@huntingpublicnz]

Awesome job man 🤙🏻

[@clinte9897]

Heck yeah! Good job

[@marlonsheffield2652]

Can I get the wiring diagram

[@jackdeason4445]

did anyone hear back about the SIM card? trac phone work?

[@JSROutdoors]

kzbin.info/www/bejne/e5mop4CtfJqVl80

[@mikaelmendiola8851]

Can I please get the wire diagram?

[@JSROutdoors]

kzbin.info/www/bejne/e5mop4CtfJqVl80

[@jacksprat7087]

That gate looks just like the one I made several years ago! I used 3/4” plywood for the gate. My plans are online in a PDF file if anyone is interested.

[@doug4270]

What do you use for a camera? I have built a cellular activated trap door, and I have a spartan camera watching it, but I want something better. I've been reading plans on how to add a security camera so that you can watch a live stream, but I'm not sure what all will work.

[@jacksprat7087]

Doug, I have never done live streaming. I used a Spartan camera too. I know you’d need a data plan and an IP address. I’ve started using LiFePO4 Lithium batteries instead of lead acid for my cams. Wouldn’t work though to activate a solenoid.

[@doug4270]

The Spartan works good, but I'd really like to be able to watch real-time video. Plus, the Spartan has a limited range of view, or at least it does with the size of our trap. I've been reading this article, and they say to get an IP based webcam, but it doesn't seem to be as easy to find as they make it seem. Here's the article in question. With an existing unlimited data plan from Verizon, I'm not sure how much more it would actually cost. With the way this guy did it, you could just about have a live streaming setup for less than $300. I sent them a message for more information but I doubt I'll ever hear back. Probably be one of those trial and error type scenarios. itstillworks.com/12255380/how-to-build-a-wireless-trail-camera-with-a-live-video-stream

[@jacksprat7087]

Spartan is coming out with a live cam later this year. Do you have good cellular connection at your place of use? I used to make Yagi Antennas. They really help.

[@doug4270]

I just found this out! I'm a Spartan dealer, and this information isn't even known among dealers unless you do research. That is an answer to my prayers haha!

[@jamesweitman1177]

Can you email me the wiring diagram for this?

[@robertyoung3848]

James Weitman did you ever get the wiring diagram for this

[@jmarcant616]

@@robertyoung3848 when you get it, Can you send it to me [e-mail]

[@christopherbeck14]

@@jmarcant616 Well did you get the wiring diagram?

[@JSROutdoors]

kzbin.info/www/bejne/e5mop4CtfJqVl80

[@radioace318la]

Now that AT&T has killed its 3G GSM service, does Tracfone still work for you? It would be awesome if the trail cam had a closure port on it. Cheers from Louisiana.