DIY Chain Tool

Explore a wide variety of content in our carefully curated KZbin playlist: • Binge-Worthy Content
Find more amazing tips at @TotallyHandyShorts #shorts

[@helloworld90597]

First DIY mini weld job video that resulted in a useful tool

[@tommyosman2194]

Absolutely

[@aduon]

True

[@thoubias]

Came here to say this

[@akfinner1]

I doubt that bolt is strong enough it would probly just bend

[@LyingOtaku]

I think you still need to grind the rivet head off first

[@Dcale]

Can we see you make a continuous weld?

[@digitalis2977]

Tack. Tack. Pray.

[@Bowsarge]

@@digitalis2977 My phone wants to translate that comment to "thanks thanks".

[@Bowsarge]

Why do that when it looks cooler to tack weld?

[@yourdrummer2034]

@@digitalis2977 exactly.

[@yourdrummer2034]

@My Name your joking, right?

[@A_t_o_m]

Сталь пластилин 3. Вызывайте Доктора!

[@user-fq9tl7cn5h]

Среднее значение по больнице , поастиоин 3 , однозначно , доктора 😂😀

[@armanrai8919]

@@Johny570 lalààlàf J

[@ivangerasimov2705]

Здрасьсьсьсьсь 😁

[@user-py8tl7et5f]

Глазааааааааа

[@gmmips]

Я за него.... Здрасььь

[@Jarost167]

Опа, склеечка в тот момент, когда плунжер из болта класса прочности 4.4 должен расклепать заклепку прочностью сопоставимой по прочности крепежу класса примерно 10.9 а то и выше

[@r.i8582]

Не знаю от чего эта цепь, но что то мне подсказывает, что должны быть нормальные заводские решения, такие же как "выжимки" для велоцепи

[@macosm7818]

Oczywiście, masz rację. Końcówka powinna być jak najtwardsza. Profil otwarty też nie zapewnia odpowiedniej sztywności. Pozdrawiam.

[@huseynekberovv2213]

Ne yazdigini kendin anladinmi acaba😒🤨

[@huseynekberovv2213]

Bide kadinmisin erkekmi 🤦‍♂️

[@ivanmironov4217]

Да это шляпа полная у меня клепальник елдатень здоровая и тот напрягается когда цепь клепаешь а тут фуфло пластилиновое надо штук 10 таких чтоб хотяб расклепать цепу

[@smaxpain4380]

So many fisheyes I thought I was watching SpongeBob

[@JWILKO2107]

Bro learn how to weld properly instead of doing 50 thousand tacs

[@alexvdvelde]

Not of you're business. Let this man weld how he wants.

[@yourdrummer2034]

@@alexvdvelde he made it our business when he showed the actual welding. And now others may think spotting it like this is acceptable. If you only plan on using it a few times and tossing it, then I'm sure it's fine. But if you are planning on getting years of use from it, chances are it will break sooner than later.

[@funkysod]

@@yourdrummer2034 probably not due to tack welding it. probably the soft bolt (the pin bit) will mushroom out and render the tool useless. i think in this application tack welding is the way to go. keeping the work a bit cooler and the welds are not under a lot of strain. and nobody's gonna get killed if the weld fails... yes, i do know how to weld. this is not a tool that will outlive the welds.

[@yourdrummer2034]

@@funkysod I agree with you on many of the things you said, but you can still weld this correctly without jogging or stacking tacks. The less homogenous the weld and weld area is, the more likely you will have cracks propagate from the questionable spots (holes at the edges of tacks, and the crater in the middle of each tack). 95% of the time, cracks will almost always start in the wrinkly crater at your stops, and run straight through the weld. 1 crack appears and it's 100% chance the whole weld fails.

[@funkysod]

@@yourdrummer2034 i think we basically agree. that's nice. theese videos are perhaps not focused on strucural welding (honestly it's crappy click bait). watched it because it popped up 5 mins after i used a chain splitter. the more pressing question here is how the beep did skynet know i just used a chainsplitter..

[@crislopez8028]

Here just for the comments 😂

[@jamerbunz5768]

Exactly lmao

[@AkaedatheLogtoad]

Always

[@bibinoojen]

Same 🤣

[@ForestWoodworks]

😎

[@novavolks9652]

@@ForestWoodworks qué marca de soldadora MIG es?

[@hayden6119]

Thanks for the tip. Instead of paying $15 for a chain breaker I'll just pay $500 for a welder, get the wire, gas, and a belt sander! So much easier thanks!!!

[@TheWolf92]

😂 my thoughts exactly!

[@matthewbeaver5026]

Where can I find a chain breaker for $15. Last I looked it was like 70 for the junk one at harbor fright

[@45Mang]

Decent welds on a decent tool. Nice job!

[@filippche]

Да проще инструмент купить специальный за 150р. Те же деньги, только надежнее

[@sourmaui392]

Ahhhh yes , I’m going to spend thousands on tools and equipment so I can make this .

[@nezumiy3656]

If having these tools, no need to make new one.

[@constantinchivu583]

Exact asta am spus eu 👍👍👍

[@dogwalker666]

Chain splitters are not expensive.

[@ZootedSosa]

Then you’re probably an idiot it doesn’t take very much to make this

[@Professionalfailure]

I think the idea is that you already have this stuff Ofc most people don't have a welder laying around, but if you were the type of person to actually make these sorts of things then you would already have one

[@user-on8tc6ey3m]

250 полуляхов, к бабке не ходи.

[@user-il4zk5ie6l]

Здрасссссти😊

[@yshuake9024]

Да не, тут еще более-менее, максимум 100 полуляхов

[@krazivon6659]

I learned how to do break a chain with a screw driver and a hammer when I was younger

[@ForestWoodworks]

Me too!

[@Oneminutetofixit]

Idk folks, usually the pressure needed to pop the pin required a harder pin than the one you're pushing. Edit: I don't actually see the pop of the pin in the video because they did that on a bench with a drift pin.

[@Mongoliantreecow]

When you have a welder, angle grinder, and scrap metal laying around but have to engineer a chain pin pusher like what

[@Professionalfailure]

It's more fun when you make it yourself

[@Mongoliantreecow]

@@Professionalfailure but far less practical. You engineer tools out of necessity. Not for social media clout 😂

[@kima3462]

Хахаха, выжимает через склейку

[@vairen]

Да разогреется, там все из пластилина, стальную цепь

[@user-pi6yc3lb7h]

Просто треба молотком зверху пристукувати)

[@cmdsandiego]

Better to buy one because the material is hard steel last linger. This one is a lot of work with a soft bolt.

[@985GEE]

اختبار اللياقة بالجرام pacer هو اختبار قدرة هوائية متعدد المراحل يزداد صعوبة تدريجياً مع استمراره. سيبدأ اختبار pacer البالغ طوله 20 مترًا في غضون 30 ثانية. اصطف في البداية. تبدأ سرعة الجري ببطء ، لكنها تزداد كل دقيقة بعد سماع هذه الإشارة. [إشارة صوتية] يجب إكمال دورة واحدة في كل مرة تسمع فيها هذا الصوت. [دينغ] تذكر الجري في خط مستقيم ، والركض لأطول فترة ممكنة. في المرة الثانية التي تفشل فيها في إكمال دورة قبل الصوت ، ينتهي الاختبار. سيبدأ الاختبار عند بدء الكلمة. على علامتك ، استعد ، ابدأ.

[@jokosuranto1789]

Woww smart... Good job,...

[@wepadowletow5183]

Идея сама хороша. Если только вместо того чтобы точить резьбу, просверлить нужного диаметра больт и и засунуть туда поломанное сверло которое есть и прихватить. Профиль поменять на швеллер и т.п. так лайк от меня

[@afanasij7896]

Согнется 100%. Метал профильная трубы очень мягкая.

[@marcosmuller4245]

Tpp idea

[@margaritabiaggio6558]

Sos un Genio .. Siempre con precisión y prolijidad en tus trabajos.. muchas gracias por brindarnos todo estos aprendizajes y enseñanzas.. Saludos y Gratitides desde Argentina.

[@Jester_The_Jynxster]

Chain link separators are not expensive at all. And you don't have to weld a new handle on everytime you want to change tip sizes....just buy it. If you already have a welder, and work on chains often enough to bother having a tool, and not just using a punch, just buy the tool.

[@technicalmewad213]

superb idea 💡 👌 👏 👍

[@paulowagnercamararamos]

Parabéns 👏🇧🇷

[@vietnamsurvival7213]

Peru 🇵🇪 Brazil 🇧🇷

[@user-kb9of2fw9w]

Спасибо большое, очень приятно смотреть как вы делаете.Удачи и новых решений

[@jbilletz]

I needed this yesterday. Had to modify a real one.

[@SubjugatedAuthority]

Save $12.50 using $1250 worth of equipment wheeee

[@MikfinityPog]

@@SubjugatedAuthority That you already have if you're a welder. Or, borrow a friends.

[@Professionalfailure]

​@@SubjugatedAuthority you can get a welder for downwards of £100 and the steel you can get from a scrap yard for a fiver

[@imred6045]

250/250

[@kennethphillips6362]

Let me tell you how genius this is... Pretty genius

[@dankers_420]

Except for he doesn't know how to do a bead for welding So he just does a shit ton of tiny little tack Welds Which are poor quality

[@victorsantana4773]

1.chains have hardened steel, you really think a bolt that was grindes down is harder than the chain. 2.once he removed the chain U can see he drill it out.

[@screwsnutsandbolts]

Great job ! 👍

[@frederickacker5379]

Beautiful Tool. Thank you.

[@user-dr3jg5bn4c]

Если по- рабочекрестьянски керном на той же гайке не получается, то эта приблуда крайне необходима.

[@user-ok6oo5qv3b]

Да ладно Бро, с такой подачей показывать это....ты себя недооцениваешь

[@Silver_o]

Lay down a proper weld bead. Stop tacking like a maniac

[@antiope847]

Can you teach welding

[@MachineManGabb]

Make a Better one yourself, it's totally fine

[@iamnegan1515]

He's a fine welder.

[@digitalis2977]

@@iamnegan1515 ...said no one, ever.

[@yourdrummer2034]

@@iamnegan1515 he could be. But the welding demonstrates that he isn't.

[@Le20e]

Excelente!

[@dannysims5914]

The 🎶 is always 🔥..

[@dinoj8126]

But the welding isnt

[@yourdrummer2034]

@@dinoj8126 hahah! You beat me to it!

[@dinoj8126]

@@yourdrummer2034 Thats the only thing i look at in this kind of videos 😂

[@yourdrummer2034]

@@dinoj8126 I hear you.

[@solo4158]

With that wall thickness , it will bends easily

[@bettafish541]

Then add supports to it

[@Truth-Seeker777]

Was gonna trash talk the welding, but for what he made it was understandable.

[@user-pn9oc9jz1g]

Вот это вещь, как я раньше без этого обходился ,не знаю...

[@akrammohamad8407]

افكارك جميلة انت مبدع ويلزم الدقة افضل من هذا مع الشكر لك

[@MIRZA_ENGINEERING]

Good Work

[@MIRZA_ENGINEERING]

Super👍

[@claudiorodriguesalves3672]

Parabéns pela sua inteligência que Deus te abençoe

[@sportsandautomotives4739]

👌 good work 🥰

[@ashpollock9907]

Ok this one is actually pretty good

[@randombird404]

Now THIS is something that might actualy come in handy

[@hadjarel4050]

Все ваши ролики снимаются в аптеке?))))

[@user-tn2gv4vv3c]

Почему?

[@hadjarel4050]

@@user-tn2gv4vv3c чисто как в аптеке!)

[@user-uq4ih7vk5k]

Потаму что клёпки на цепи из высоколегированной стали. Согнётся и иголочка из болта и пластина нах.

[@alossinlove4701]

Can be used for bicycle chains

[@DB4KK]

lol, no it can't

[@kenan_allaham]

@@DB4KK why not

[@randytolle6706]

Good idea if the chain cooperates. My chain pins were harder than my Cycle Gear Chain Tool and it deformed the pin of the tool without moving the chain pin. Went to a high quality chain breaker.

[@fablesguykol3025]

Actually a useful tool for dealing with chains. Nice.

[@HardlyDavidson92]

What kind of chains do you wanna press with that? 😂👎🏻

[@HardlyDavidson92]

@@Stalkeranon Sure, genius. I should have asked why.

[@carny15]

Lol, whenever you take out your welding machine it's automatically easier and cheaper to buy the actual tool you are trying to replace.

[@charlesrickard1672]

I could only see this working in small chains. The heavier the chain the more force it’s going to take to pop that link out and you’re going to end up bending that tool.

[@wizard_of_poz4413]

You could bend those two metal ears with your bare hands probably

[@constantinchivu583]

Trebuie să ai scule pentru acest obiect(bormașină,flex,aparat de sudură).

[@VinaX2R]

Pins on these chains are hard steel. That pointed pushing screw will be bent and beat in no time.

[@blakecamden4292]

This for sure works better then any one you could buy

[@Chen-kuan_yu]

直接買一個打鏈器好像比較實在

[@michaellewis9589]

Pay for expensive welder, or just buy the tool that’s made for it or put chain in a vise

[@jessejackson4690]

Ive got three welders and not had any use for a chain breaker yet if i needed one I could do this. I wouldn’t do it….. but I could

[@catherineharris4746]

Beautiful! And that music track is fkng fabulous!💗👍👍👍👍

[@user-ml2ss6we6k]

Тьфу... Я то думал, что это будет... Цепь расклепывается в три секунды, просто кладётся ось на гайку соответствующего размера и хорошим бородком в один точный удар выбивается. В своё время часто приходилось заниматься с цепями, не с мотоциклетными, а от оборудовпния. Снимать и ставить специальные звенья, к которым крепятся разные поводки. Ну а тут хреновый болт, да еще обгорел на болгарке, этот конец мягкий. А ось сидит плотно. И бородок нужен весьма крепкий.

[@TiagoSilva-cv7]

Show de bola professor 👏👏👏

[@ceedsnuts4965]

Wow first useful one I’ve seen lol

[@chrisjones1490]

I'm going to send this guy some chalk or a scriber them 5mm thick marker pen lines drive me mad

[@randytolle6706]

And some layout blueing

[@JackDaniels-hz8tc]

what type of welding is that. i want it.

[@AjasAbdulazeezofficial]

I am also looking for that

[@haifaferrah9372]

Ces ✋✋✋✋✋✋✋✋ si précieuses qui font un boulot bien précis. Parfait comme travail. Bravo.

[@andriesdupreez4170]

That’s a tool you will use once and next time you take it out it’s so rusted you won’t be able to use it Then you gotta either make another spend 20min cleaning rust and getting it lose Just buy the right tool for 10 bucks and it won’t rust on you

[@ZootedSosa]

This is why you get a master link 😂

[@cajamanual6713]

Why are so much hate about his welding technique of this guy?

[@FloofyTanker]

Is the screw necessary? can't you just hammer the pins of the chain out?

[@madhav5499]

Woah mate there's nothing *D I Y* in it.

[@jessejackson4690]

Why not?

[@msfoxx244]

Wonder if this guy knows how to weld or only tack

[@mattferrigno9750]

Bro you can buy one cheaper then making one. They sell for like 10 bucks on Amazon. You need steel tube and a welder with gases as well as a tool. I can't see this saving any money

[@garystump5680]

Thoes cheep tools you can get look like they will do a good job I've had 3 of them 2 were from bell and another one was from some weird company but not one broke the chain 2 broke that little pin and the other one broke where the chain got pressed up against

[@AndiAnakKampung]

ide bagus,sangat menginspirasi 👍👍👍👍

[@user-yk6yv6bg7v]

Молоток и гвоздь в помощь, зачем столько париться?)

[@MrNeofelis]

Фигня, съёмник для цепи стоит не дорого. Нет смысла его мастерить. Самое сложное назад это собрать, так чтобы потом не вылетело.

[@user-fq9tl7cn5h]

Неа , не угадал , сталь это скажем Наконечника ) должна быть твёрдой , иначе твой "съёбник" 😀 будет одноразовый

[@warriorson7979]

Genius😌

[@klownklooownaaaaaaaaaaa2901]

Вашу ж маму!! Есть инструмент за 300рублей!! А есть ещё молоток и гвоздь!!

[@EclipseCeLL]

Now drop it, throw it, kick it. See if those spot welds hold up

[@donaldphillips2648]

Who or what was the biggest influence in your life??

[@doinitoutback]

I'm sorry but this seems like a lot of work for something you could get at Wal-Mart for 12 bucks

[@HenrynotEmily]

What welder is that?

[@liamhill1702]

This actually looks easier than my $25 dollar chain tool, 👍

[@user-se1ps1uv1x]

Чувак ты что серьёзно думаешь ,что сталь пластилин 3 ,способна расклепать цепь

[@rgoeman9368]

After you add your materials and the valuation of your time you'll find it's less expensive to purchase a professionally engineered, commercially available tool.

[@jessejackson4690]

Not to mention the proper tool is heat treated and will last longer

[@dexterjsullen]

If you can afford a welder you probably can afford a chain tool soooo.

[@flyingsky1559]

At least it’s a real thing, not a dohicky like usual. But that’s like 5 bucks of material, plus a 100 dollar welder and a days work for a 5 dollar tool

[@thenorthernhandyman]

There should be a license to be able to buy a welder....

[@t-red5405]

Профтруба разогнется быстрее чем ты выдавишь клепку

[@klegraefe]

Honestly did that C channel metal flex when u pushed that pin. Coming from 20 years BMX background find this hard to believe it worked

[@catherineharris4746]

What's the name of that track please?👍

[@edsonordaz6726]

Cabana - [ocean jams]

[@CM-hr8ou]

Harbor Freight sells chain breakers for like $10, no Welding involved. 😑

[@_.-._.-.]

Oh no people spending their time and effort in a way they enjoy how will you ever cope I guess its 100% necessary that you leave a negative comment stating something that doesn't even apply to most people

[@CM-hr8ou]

@@_.-._.-. yea cuz that’s what we need, some internet Nancy boy getting his feelings hurt, for other people.😑 grow a Pair. Or go take a long walk off a short pier, Lucy. Midol is like $2 a box. You might consider that.

[@sumeetshinde6634]

Smart job 👍

[@sumitawm7537]

Bhak mother fucker

[@robotseattrees9386]

The person in the video has access to a welder but doesn't own a bench grinder

[@henryhovden9509]

Diy + 5000 bucks for the mig welder

[@dominicevans2541]

To be fair, I'd rather just buy the chain splitter.. probably be cheaper too

[@leosnoy2023]

Life is so easy 😭😭😭😭😭💕

[@diosjaimemontoya5356]

Herramienta indispensable para la reparar la cadena a la moto

[@fam4sta611]

An actual useful tool