DIY! CUTTING BOARD, LICHTENBERG FIGURE & EPOXY.

[@mikecrowe6704]

A little tip. Sand down your surface to be burned to your final grit then burn the board. That way you don't sand out all your fine burned lines. Your way loses all the fine detail.

[@deedubman3775]

Beautiful work! Ain't gonna lie though.. I played the section from 7 minutes to ~9:40 a few different times just for the music 😆 Killer tune

[@dandeliondreamshomestead5222]

So beautiful! Amazing job!

[@joannrice8359]

Hi, I am curious about how you made sure that you don't use a rubber pad under the board. Recently, I bought a fractal burning kit that generates 15,000 volts of electricity. Every video I have watched on this process, suggests using a rubber pad with a kill switch in order to prevent shocks. I noticed that you placed your wood on gravel. Do you use a kill switch? How do you prevent accidental electric shock when using your fractal burning equipment?

[@thyselfjewelry2898]

Can you cut on the board and it won’t affect the resin?

[@scaryjerry4665]

It will. Epoxy makes a poor cutting surface. I'm sure he just forgot to mention that 😉

[@crashap897]

Отличный результат!!!

[@tomridenhour4816]

what is your power source? neon transformer, microwave transformer? thanks

[@shanelipe2552]

Great question

[@cxrlplays1038]

I wish u explained how to make that color and all the stuff u use.

[@ndpesicgroup]

Great work

[@ronaldrvvanhook1437]

What are you going to use it for?

[@MacalusoWoodworking4777]

Music is amazing, love it alot. But some commentary would be nice

[@cosminmiroiu825]

The result is amazing! Can you please tell me what did you spray the wood with at 07:35 and at 12:35 ?

[@carrierussell9224]

7:35 is probably just water to get the dust off to check his progress. 12:35 is likely a food-grade mineral oil to protect and condition the wood.

[@cosminmiroiu825]

@@carrierussell9224 Thank you!

[@schachprinz1837]

@@carrierussell9224 Du kannst auch 7:35 Spirit und 12:35 Leinsamenöl nehmen. Aber Propanol ist auch gut. Bloß Mineralöl würde ich nicht nehmen

[@kaitlinpearce1510]

This is amazing !

[@louibeans]

Don't try this at home! This method is highly dangerous and lots of people habe died by accidentally electrocuting themselves! Watch the video on the dangers on the "How To Cook That" youtube channel.

[@vernsteinbrecker3759]

Very nice

[@resinflamedecoartlauraricc1139]

I would appreciate very much if you described how you did it, what you used, and so on.

[@louibeans]

Don't try this at home! This method is highly dangerous and lots of people habe died by accidentally electrocuting themselves! Watch the video on the dangers on the "How To Cook That" youtube channel.

[@SergeantExtreme]

You can't. This is a huge arts and crafts "no-no".

[@resinflamedecoartlauraricc1139]

@@SergeantExtreme , ok, I saw how to do this method in another video, np.

[@resinflamedecoartlauraricc1139]

I work with epoxy resin as artist, and I saw that this method is rather dangerous (using a very high electricity tension) so you have to be very careful doing it. It's not for everyone 🙂

[@cj-seejay-cj-seejay]

@@resinflamedecoartlauraricc1139 "Not for everyone"?? More like NOT FOR ANYONE. Dozens of people all around the world have died or been seriously disfigured by doing this. NO CUTTING BOARD IN THE FUCKING WORLD IS WORTH THIS RISK.

[@dalesuggs3658]

Didn't have any explanation on how you did this method

[@UnknownLucaLovesAnime]

it looks beautiful but it's very dangerous so don't try it at home

[@CurDiem]

I can’t believe this only has 85 views

[@louibeans]

Don't try this at home! This method is highly dangerous and lots of people habe died by accidentally electrocuting themselves! Watch the video on the dangers on the "How To Cook That" youtube channel.

[@SergeantExtreme]

The algorithm is intentionally suppressing these kinds of videos.

[@cj-seejay-cj-seejay]

@@SergeantExtreme Just a wild guess, but maybe it's because they have been known to kill dozens of people.

[@jasonkirk7948]

Good job sanding all the detail out of an otherwise good looking burn.

[@hooseinbahrami1546]

💙💙💙

[@ttmann1329]

did you need a Car Battery to make this fire burning?

[@OliverDederick]

This is so punk rock

[@robinpaul3553]

How you use this blue liquid sir please reply

[@louibeans]

Don't try this at home! This method is highly dangerous and lots of people habe died by accidentally electrocuting themselves!

[@SergeantExtreme]

It's called epoxy, and there are literally hundreds of epoxy tutorials here in KZbin. Simply look them up.

[@runifuceeme406]

YOU SHOULD REALLY CONTROL THE FLAME A LOT MORE.. OTHERWISE, ITS JUST BURN CHAR..

[@forgetme2]

Omg no more sax. Please! But great work.

[@jordanthistle2360]

Please tell me you arent selling these to people. Epoxy resin is not food safe unless you buy the food safe epoxy, even than it isnt safe for cutting food on it.

[@stankrieger3598]

I love your great looking work. But a vide that tells you nothing on material used or methods of work. Just Sucks

[@istrumguitars]

No rubber floormats, no rubber backing… literally just burning on a concrete block using basic jumper cables 😂 I hope you’re at least using a deadswitch

[@ForgedInHolland]

DONT STAND SO CLOSE, this is super dangerous. Also exposed clamps is not smart at all. What if a animal randomly comes running across, or a child? Overall your safety precautions are far to loose. I don't recommend dying for some stupid cutting board...

[@mateodede103]

Why you worried bout this guy when you can’t even wear safety glasses fool?

[@ForgedInHolland]

@@mateodede103 Worst Il get is a spark maybe. Worst he would get is death...

[@jeanespejo867]

Again why so worried about this guy do u know him

[@andrewlloyd4702]

Irritating music!!!

[@danielfishburn7042]

Just fyi this will kill you

[@rabakomaba4562]

Mine works too. I used the Woodglut plans and performed it without any problems.