Respekt, das sieht echt cool aus. Da ich es selbst schon gemacht habe, weiß ich, wie viel Arbeit da drin steckt. Mega umgesetzt, cool auch der Wechsel auf halber Höhe. Das ist eine ideale Lösung, erst recht, wenn man nicht mehr von unten an die einzelnen Stufen dran kommt. 👍
@lotfilatli5903 жыл бұрын
This is DOÔOPE !!! I need the complete build guid please
@Defyyyy15 жыл бұрын
This is the coolest thing I have seen in my entire life
@tinkerfun5 жыл бұрын
Thank you😀
@tamilmani92583 жыл бұрын
@@tinkerfun how much for squar feet
@zayn99324 жыл бұрын
Tinker..This is genius..You need to turn this into a business. I and many would purchase this. You have some serious talent. Make it happen.
@tinkerfun4 жыл бұрын
Thank you so much. I've started a business now. I will check if it is possible to provide a product or kit in the future.
@mosuhu4 жыл бұрын
I'm in line, this is amazing!
@tinkerfun4 жыл бұрын
Thanks for that I am very pleased
@rickdeckard98105 жыл бұрын
Very cool! would love to see a version where the LED strips are below the risers and fade in and out as you walk over them.
@moussatamrabetАй бұрын
I saw only this video in your Channel and you have my subscription
@patrikpa30694 жыл бұрын
Perfect...now i must buy a two floor house
@abdullaalzayani91594 жыл бұрын
hahaahhaah
@ohno7835 жыл бұрын
All fun and games till they start turning on at night by themselves
@GeraltOfRivia695 жыл бұрын
Copied comment
@milkncookie5 жыл бұрын
Yay a ghost party!
@NEMRAWI5 жыл бұрын
😂😂😂😂😂😂😂😂😂😂😂😂😂
@markrichardson11714 жыл бұрын
Would love to do this project is the sketch available for this plz ???
@father63715 жыл бұрын
Oh God, that's a ton of work
@kan815k4 жыл бұрын
Hard work, good results in the end. 👍👍👍
@arenttelindert29135 жыл бұрын
Nerv wrecking music. No explanation, no script.
@tinkerfun5 жыл бұрын
Read the video description. Here are the info you need. Software you have to make yourself. tinker-fun.chayns.net/digitalledstairlighting
@jasongongNEWSTAR-LED6 жыл бұрын
very great.....next time you can try to use APA107 White LED Strip to replace APA102 LED.
@hemanshanand63445 жыл бұрын
Benefit?
@berniesmith3092 Жыл бұрын
So cool - I would love to create something like this, but maybe simplified with just one sensor at the top of the stairs and one at the bottom. That way the lights could track up or down on sensing a person, then turn off in reverse as they reach the bottom.
@Hajjat2 жыл бұрын
Please share the tutorial! This is amazing!
@krzysztofsoko946716 күн бұрын
How did you cope with the LED power supply? Did you use two power supplies? What kind of cable did you use? At 5v current flows a lot
@ruffrog4 жыл бұрын
Very impressive
@MatSmithLondon5 жыл бұрын
Okay - interesting. I think the ultrasonic distance sensor is better than PIRs here - more accurate location determination. But this one is use just to sense a leg passing a single stair, not to judge distance. Do you think it is possible or practical to judge distance? That would be amazing, as you can have the lights moving exactly with the person. Secondly I really like your use of individually addressable LEDs. BUT - maybe I prefer the "one LED strip per stair" instead of the linear installation. As it's more visually impactful, and also actually lights each step well, so it is useful as well. What do you think? Finally I wonder if it's possible to somehow do something like you've done but in a whole room perimeter, not just stairs? I'm thinking camera movement sensor hooked up with Arduino. That's the next step!
@somedude24925 жыл бұрын
The lights turn on and follow a certain pattern, then they wait for the second sensor to activate the other half of the pattern. Measuring distance would not help at all really.
@ni7mo4 жыл бұрын
Nice work
@tinkerfun4 жыл бұрын
Thanks 👍
@toanpham4395 Жыл бұрын
Would you please provide a list of all components and where to buy to built a LED staircase. Thank you so much
@BUZDRIFT5 жыл бұрын
Fantastic!
@tinkerfun5 жыл бұрын
Thanks 👍
@marchinoasti3 жыл бұрын
Nice!!!
@vivekmrai5 жыл бұрын
Can you upload a video of the entire project . Sheer genius work
@tinkerfun5 жыл бұрын
Hi. That's all video content that I have. Greats Benni
@flatron17075 жыл бұрын
KILLER👍
@pratikambade59755 жыл бұрын
I ready to purchase this product
@jimbourton47084 жыл бұрын
Where did u buy this
@tinkerfun4 жыл бұрын
This is a do it yourself project not a ready product. Best regards Benni
@eslante4 жыл бұрын
what happen if there is someone going upstair and downstair at the same time?
@tinkerfun4 жыл бұрын
Here is the answer. kzbin.info/www/bejne/jmnZeYqGobp9idk
@Drxxx4 жыл бұрын
this work is amazing. great video!!
@tinkerfun4 жыл бұрын
Thank you👍
@tripzero05 жыл бұрын
Looks like you did the white apa102s. I used the RGB version in mine. We've rebuilt our stairs so I'll be doing this again soon.
@tinkerfun5 жыл бұрын
Yes. Here a all Infos: tinker-fun.chayns.net/digitalledstairlighting
@franzfms864 жыл бұрын
So amazing!
@jankeizer40516 жыл бұрын
Wieder mal geiles Projekt! Feier auch den Videoschnitt a la step by step. Daumen hoch
@tinkerfun6 жыл бұрын
Jan Keizer Danke Jan 😀
@asharsumari93135 жыл бұрын
genius my friend
@davidkoenig094 жыл бұрын
Fehlt noch die Erkennung der Katze 🐱 😁. Aber geil, ich hab ein neues Projekt in der Pipeline ....
@Ambigayu92172 жыл бұрын
Sir i am indian how to make this light please making vedio sir very nice👏👏👏👏👍
@conorjumper88615 жыл бұрын
Could you make these blue or green? That would be epic
@tinkerfun5 жыл бұрын
Yes when you use digital LEDs like SK6812
@tazboy19345 жыл бұрын
Blue is a no no
@kismetelektrik-samsun22854 жыл бұрын
Very good 👏👏👏
@louisbertini68405 жыл бұрын
THIS IS DOPE!
@virtualnk582510 ай бұрын
How does this work with more than one person up and down the stairs?
@aurorefaberes73234 жыл бұрын
Vraiment trop cool 😱😱
@gur3166 жыл бұрын
Very nice project. Can you are able to share the code and schematic.
@tinkerfun6 жыл бұрын
Hi, the software code is not so good that I will share it. I´m not the pro developer in software. You can see on the URL in the description how I built the project. There is a component overview, too.
@davidjones53210 ай бұрын
I will be honest I was bopping to the tunes at the start I though I was going to enjoy this vid going to do it in my home then it ended ffs man
@cyberdurc225 жыл бұрын
Brilliant!
@TonyCecala4 жыл бұрын
Brilliant! 😎
@nuovovideo5 жыл бұрын
I think Leds has to turn ON more forward from your legs
@Talha807775 жыл бұрын
It depends on the position of ultrasonic sensors
@junaidmalik77123 жыл бұрын
Hi Amazing work !!!! I will start my DIY project next month could you please help me. Do you have a Manual guide I could follow. Many thanks
@AntonioLopez-ym4df2 жыл бұрын
Hola muy buenas trabajáis por Barcelona
@bamtama42524 жыл бұрын
very nice, I will do it at home, can you help with the installation of the wiring diagram?😁
@iatkinson002 жыл бұрын
So I just have one run I would need to do but do you have a more detailed view on how the wiring is? Also is there a time delay you can set where the lights stay on longer?
@ClaBos4 жыл бұрын
Hi. I usually use Arduino one, can this project be adapted? Would it be possible to have the sketch of the program? Thanks so much
@minoman64345 ай бұрын
Hi, gab es eine Aktualisierung zu diesem Thema? LG
@piggyniya79184 жыл бұрын
Is there any video tutorial step by step .. thank you great job
@WellPCB6 жыл бұрын
Good video.LED stair lighting is a good design.Give you a thumbs up.
@tinkerfun6 жыл бұрын
WELL PCB thank you 👍
@Arsenal-813 жыл бұрын
I'll be traying to race the light
@TheUser8083 жыл бұрын
Would be cooler if sketched out how you did this
@manssupar5 жыл бұрын
Or just buy sensor lamp so we don't need to install some weird code. But i still liked ur video, smart n creative guy.
@tinkerfun5 жыл бұрын
Thank you ! Anyone can build their own staircase light as they wish. I like technical things because I am a maker.
@josiahsmith5002 Жыл бұрын
Hello, how do you make the running light move both ways
@luigicash98214 жыл бұрын
hello, and the Arduino bookshelves and scheck which are ....... thanks
@farshidmehrtash41155 жыл бұрын
Starship house!
@user-cn5tp1zk3i8 ай бұрын
❤
@lsudan26705 жыл бұрын
it's all noice 👌 and dandy but let's talk about 💰💸💰💸
@mawwizshaikh74283 жыл бұрын
Need this in detailed
@dissectingdiy3 жыл бұрын
Do you have a product list? Need stair lighting and there’s no room for sconces or wall lighting. This would be perfect and would address a safety issue.
@cooljey863 жыл бұрын
Very cool project, is there a link to build this project? I would like to do similar at my place.
@boopeshkumarprabhakaran3 жыл бұрын
Hi , I made a project on automatic staircase lights with arduino and ws2812b but unfortunately nano cant support more than 600 leds which disappointed me. my stairs runs nearly 11 meters (60 led/meter). soo i planned to do same with esp32 i have few doubts. can i use two ultrasonic sensors. one at top and bottom. and also as i read in community that it can only trigger lights but cant reset. is it possible to trigger lights at bottom and as the person walks to top the lights should stop. help me to finish this project.
@mateorusconi91244 жыл бұрын
How do you blur the light?
@FeroxWJB4 жыл бұрын
Thick cable for 5v power line.... like what gauge?
@franzfms864 жыл бұрын
I guess burglars will be panicking coz the stairways suddenly light up and any security lights. LoL
@user-nu4ru5dr6b5 жыл бұрын
When I was going to buy led lights, I found that APA 102 warm white light was more expensive than APA 107 RGB. I don't know why.
@sumelle24 жыл бұрын
Is there one that is battery operated that just stays on all the time? But that won’t need battery changed too often?
@tinkerfun4 жыл бұрын
This is not battery operation. Fixed power supply. Best regards Benni
@jurgenungerer77493 жыл бұрын
Megaa!!! Würde auch gern WLED im Handlauf umsetzen. Um diesen Effekt so umzusetzen, musstest du einen Usermod Stairway flashen oder? Ich scheitere leider dabei... gibt es dazu eine Anleitung?
@ChristopherStLouis-tc5qn5 жыл бұрын
Where did you hide the drivers? They look way to big for that application btw. lol
@tinkerfun5 жыл бұрын
You mean the power supply? For the long stair I built them in a cabinet in the room on top of the stair. For the short stair I built a acrylic case and mounted on the wall. The LED seller write "43.2W/m". So I have ~ 6,5m/930 LEDs on the long stair. So I think it fits. Best regards
@janred944 жыл бұрын
Yea because those LED strips look overkill... its probably the 144 LED per meter one? :D I mean... 60/m would be sufficient... maybe even 30/m. :P
@thomasforselius39613 жыл бұрын
@@janred94 for the amount of necessary lumens, yes. But having the 144led/m makes the spacing between the diodes much less, and the fades much better looking. You don’t always need to run the leds at full power either...
@user-sg3ht1io2v10 ай бұрын
Здравствуйте, загорелся такой-же идеей, всё заказал, а теперь не знаю, получится ли у меня, так как я далёк от написания программ,. Скажите пожалуйста, вы не могли бы скинуть мне такую программу, чтобы как у вас зажигалась лента, был бы очень вам благодарен! Хотя-бы будет с чего начать, а подредактировать под мою ленту уж как нибудь постараюсь
@ammaank86854 жыл бұрын
How many arduino nano did you use. Was it one nano for 2 sensors? And why did you use the teensy controller?
@pxn14115 жыл бұрын
hello, when it detects a motion, is there a timer after x seconds the LED will be turned off or it can know your last footstep?
@sudiptaghosh25583 жыл бұрын
Boss tell how to make this and what material needed for making this
@rahulgalande95253 жыл бұрын
costing where 2 get material pls
@eddprice45714 жыл бұрын
Please tell me how and what u used for this I've been looking for something to do with my staircase
@officialjoeynguyen6 жыл бұрын
That's awesome! So what's the total costs of this whole project?
@tinkerfun6 жыл бұрын
A good question. I don´t know. The main components: ~26€ for one meter LED Stripe (APA102). I have used ~ 8 meters. Aluminium LED profile - One meter ~ 7€. Than you need a power supply. For my project ~70€, two Sensors for one stair ~ 2€, I have used 6, a microcontroller ~5 - 20€ and cables.
@officialjoeynguyen6 жыл бұрын
tinker.fun It turned out really great! Why did you choose APA102 led? Is it possible with WS2813?
@tinkerfun6 жыл бұрын
Yes, you can use the WS2813 or SK6812 but I have needed warm white light. The APA102 has 3 warm white LED chips in one LED.
@perry20175 жыл бұрын
Hi I'm thinking of starting this project, your psu has 50A capacity what size cable are you supplying this in? Thanks
@ndcamlover78833 жыл бұрын
How to make this project plz tell me and share details and help me
@MauricioLV64 жыл бұрын
Hello!! If you make this same project for a customer, in his house... What would be the cost??
@culturalhouse26434 жыл бұрын
Where did you get the aluminum stair nosing from ?
@tahminahossain55473 жыл бұрын
This is so cool! Do you sell these?
@tinkerfun3 жыл бұрын
Hi, sry this is not a product. Best regards from Germany, Benni
@techtreatment73044 жыл бұрын
dear sir plz upload full detail installation video
@robcharl3s4 жыл бұрын
still working? you had some problem with any led light?
@nihalagrahari39203 жыл бұрын
I want to buy plz send me link where I buy..🙏
@johnkulpowich52604 жыл бұрын
She's. a keeper
@Lafiro5 жыл бұрын
I’m doing this now with arduino and what looks like a custom made board. But this sounds and looks better. How could I get in contact with you for more details? I did one staircase already but my other staircase is still unfinished and I need this done before I complete everything.
@tinkerfun5 жыл бұрын
Please take a look to my project summary www.tinker-fun.com/DigitalLEDStairlighting
@EveMcWinston5 жыл бұрын
Sehr schönes Projekt! Sehr professionelle Umsetzung! Eine wichtige Frage hätte ich: Was macht die Software, wenn mehrere Personen gleichzeitig die Treppe betreten? (in unterschiedlichsten Konstellationen) Ich versuche mich gerade an einem ähnlichen Projekt und verwende den Si1153...
@EveMcWinston5 жыл бұрын
Und noch was: Wenn man die letzten Stufen runter springt (Sensor löst nicht aus), bleibt der Stripe dann an oder gibts einen Timeout?
@tinkerfun5 жыл бұрын
Hi, danke für dein Kompliment. Ich habe mir auch lange den Kopf wegen mehreren Personen zerbrochen. Wenn eine Person hoch geht und ihr einer entgegen kommt, geht das Licht leider aus, da ich nicht erkennen kann, ob die eine oben angekommen ist oder eine neue runter geht. Wenn mehrere Personen zusammen in die gleiche Richtung gehen, bleibt das Licht normal an bis der erste oben angekommen ist. Es gibt einen Timer, wenn ein Sensor auslöst, aber keine zweite Bewegung erkannt wird. Das sind aktuell glaube 15 sek.. Es gibt auch noch ein Nachtlicht. Wenn es dunkel ist, geht bei der ersten und letzte Stufe Licht gedimmt an, wie ein Positionslicht. Das ist generell gar nicht so leicht mit den Abhängigkeiten. Was passiert z.B. wenn jemand hoch geht und nach ein paar Stufen wieder umkehrt. Das System kann nicht auseinander halten, ob die Person umgekehrt ist, oder eine weitere mit hoch geht. Ich habe noch eine Idee, wie man einige Situationen besser in den Griff bekommen könnte. Wenn man nicht einen Sensor, sondern zwei pro Seite hätte, könnte man erkennen in welche Richtung die Person geht. Das heiß ich könnte besser bestimmen, wer aktuell auf der Treppe ist und ob er vielleicht wieder umgedreht ist. Aber selbst dann findet man bestimmt noch Konstellationen, die man nicht abfangen kann. Aber so wie jetzt läuft das im privaten Haushalt schon wirklich gut. Ich denke aber über ein Update mit den 2 Sensoren pro Etage nach, um dann die Richtung wie gerade erwähnt zu erfassen. Über ein Kamera Analyse haben wir auch schon nach gedacht, die erkennt welche Personen gerade wie auf der Treppe sind, aber das liegt außerhalb meiner Programmier Kenntnisse. Liebe Grüße
@gandalf17835 жыл бұрын
tinker.fun Mit 2 Sensoren würdest du doch jeden Fall abdecken. Also mit 2 pro Seite, dann könntest du ja sobald die seite ausgelöst wird einfach ne funktion im programm aufrufen wie zähle eins zu den Personen auf derTreppe hinzu. Dann wüsstest du, wie viele Personen sich z.Zt. auf der Treppe befinden. Sobald der Counter bei 0 ist müsste dann das Licht ausgehen.
@shadanakhtar14373 жыл бұрын
Where is the circuit diagram & Code for Arduino nano please give me the detailed link
@mayurpatilish3 жыл бұрын
Please I have purchased this projects what's a price
@ELECTRICALTIP39742 жыл бұрын
How do I get this?
@trendingtok58054 жыл бұрын
My god..I have never seen anything like this! Amazing!! Plzz guide me how can I do this on my stairs as well!
@tinkerfun4 жыл бұрын
Soon I will try to develop a kit with controller and sensors.
@fiazkhalid35423 жыл бұрын
@@tinkerfun hey tinker, great job, just my thing. Any chance of supplying the kit now?
@tinkerfun3 жыл бұрын
@@fiazkhalid3542 Hi, sorry, unfortunately I can not offer a kit.
@ellicopter15 жыл бұрын
Does anyone sell this as a kit pre made? I fit stair lights regularly and have been looking for something like this for a while, cant find it Anywhere.
@tinkerfun5 жыл бұрын
Hi. I think there is nobody who sell a kit. Best regards
@user-nu4ru5dr6b5 жыл бұрын
Can I replace Teensy 3.2 Microsontroller with something like Arduino uno or nano?
@tinkerfun5 жыл бұрын
I think yes. But you have to test it with your Led length. If the Microcontroller is fast enough. I will build a new version with new sensors soon. I will test a esp32 Microcontroller as a new controller.
@user-nu4ru5dr6b5 жыл бұрын
@@tinkerfun I intend to apply this project to my own house, so I would like to know more details. I'm curious what kind of sensors are you going to replace PIR? In addition, do you think nano is not fast enough, so you plan to use esp32?
@bronxp934 жыл бұрын
Do you have a link to where i can find these. Thanks
@io.0i Жыл бұрын
Can you provide the name of the LED used here?
@tinkerfun Жыл бұрын
APA102 Warmwhite adressable LEDs 144x/meter
@shivukumar7961 Жыл бұрын
How much cost
@jorgetucson81965 жыл бұрын
How much did it cost you that roll of LEDs?
@tinkerfun5 жыл бұрын
Hi. Check all Infos about the project. The link to the Led Shop is also there. tinker-fun.chayns.net/digitalledstairlighting
@ChintanDesai28065 жыл бұрын
Hi i am from India and no where connected to electronics field but some how developed a hobby to check and have this cool things. So I want to know if you can make something like this for me. What will be your cost and I can order the components online you just tell me how to do it
@tinkerfun5 жыл бұрын
Hi. I'm glad you like the project. I have tried to summarize all information here. But as a beginner in electronics it could be a bit difficult. Maybe you can first do simple experiments with addressable LEDs to learn it. I think you will have fun with the LEDs. tinker-fun.chayns.net/digitalledstairlighting
@malcolmmichaelrocque51155 жыл бұрын
Good execution plentiful o follow u thanks
@geonet39654 жыл бұрын
If I install them, I won't be able to get to the kitchen downstairs for a 3:00 AM snack without my girlfriend noticing. Looks cool tho
@tinkerfun4 жыл бұрын
😂👍
@iamalex84356 жыл бұрын
Great work ! Where did you learn to do such good things ? I want to learn it too.
@tinkerfun6 жыл бұрын
Thank you! Electronics and make things is my hobby. So I have to learn everything that I want to built.
@tinkerfun6 жыл бұрын
When you want to learn it I recommend to start first with simple projects.
@sharanmachapatry39724 жыл бұрын
DIY making video sir . I want to learn from it . Plz sir release DIY video .