DIY Electric multi cooker repair

This is an electric multipurpose cooker.This is broken. No power.Perhaps the thermal fuse is blown.Easily I found the cause of the failure.
Click the link below to view the thermal fuse specifications.
www.ermec.com/l...

[@sadafimtiaz4433]

App comment k answer bohat ache SE de rahe Hain plz bataye pot Ka power button on hone k bad foran off ho Raha hai

[@bigbrother1059]

Welcome to my channel. I think it's probably one of two things. The first is when the pot is heated without putting anything in it, and the second is when food is put in the pot and heated, but the bimetal switch is broken and operates sensitively. If it falls into the second case, it will have to be replaced.

[@sylordka]

Hello, can you help me? My rice cooker, when I press the button, the red light comes on, but it doesn't stay red, it switches to green! If I forcefully hold it, it gets hot at the connector

[@bigbrother1059]

Welcome to my channel. I'm on a business trip. I'll answer you tomorrow.

[@bigbrother1059]

It is assumed that the switch has a bimetallic function. This is to prevent overheating due to some internal defect. There are several possible causes of overheating. The first is when the connection of the fastening screw of the electrical wiring is loose or slightly loosened.

[@bigbrother1059]

If the wiring connection screw is loose, tighten the screw tightly to ensure a firm connection.

[@glenmadragon4754]

Help me pls. My multicooker is on but doesnt heat . What should i do? Tnx

[@bigbrother1059]

Thank you for visiting my channel.If you are an engineer, the first thing you can do is check whether the voltage appears in each part.Most failures will result from a malfunctioning thermal fuse or bimetal switch.I look forward to getting your cuckoo fixed.If you have any questions, I can answer them.

[@lastseen10minutesago88]

There's water inside the power button..how do i remove it?

[@bigbrother1059]

I have a late reply due to business trip. If water gets in the button, it needs to be dried. Dry with a fan or a hairdryer and leave for a day. Then assemble it back to its original position. If you upload a picture about it, an accurate answer is possible.

[@pabibo9227]

the cord is burn

[@bigbrother1059]

Thank you for visiting my channel. Your cooker is presumably overheating due to poor contact in the cord. Replace with a new cord again and check the thermal fuse. If the thermal fuse is broken, it may overheat.

[@sharoniel.jamesb2767]

i want to disable the auto cut function so i can use it for frying, how to do so?

[@bigbrother1059]

First of all, thank you for visiting my channel. Typically, heat-handling cookware consists of a bimetallic switch inside for temperature control. By the way, if this bimetal switch malfunctions, there is a possibility of food burning or fire. So there is a thermal fuse connected in combination with the bimetal. This thermal fuse is a safety device. What you are asking doesn't use the autocad function. You can simply wind the wire around the thermal fuse. However, this is because there is a possibility of a fire due to overheating. When cooking, monitor so that the temperature does not exceed the set temperature.

[@rajbudha4912]

Diy what work this rice cookur

[@bigbrother1059]

Welcome to my channel. Things like coffee pots have a thermal fuse inside them to prevent the temperature from getting too high. This is very cleverly hidden. If you have some knowledge of electricity and know how to use a circuit tester (continuity tester), you can easily find it.

[@emilyandalahao8392]

is it still ok to use even if it is wet inside? because I put ice inside, and this is the reason why it looks wet

[@bigbrother1059]

If you do not put ice in an electric cooker to defrost it, when cold and hot areas meet, dew will form on the other side of the cooker, which may meet moisture in the air and cause electric shock or malfunction. For safety reasons, this is not a good idea. When thawing ice, place it on an aluminum plate and it will thaw quickly. This is because aluminum has excellent heat conductivity.

[@emilyandalahao8392]

I used it again, it looks ok, it's still hot, do you think it's still ok to use?

[@emilyandalahao8392]

@@bigbrother1059 sir I didn't plug the electric cooker ,I just put an ice on it like a container because I forget that the ice will form a moisture on it and I just waited for the moisture to go away and used it again, it was ok to use

[@crisjunbestudio2382]

Sir can i ask something abou electric cooking pot there is no hot but if you switch the light indicator is on what is the problem?

[@crisjunbestudio2382]

I think we have a supply because if you switch on the indicator light is on but nothing hot

[@crisjunbestudio2382]

Can you teach what are the common parts damage?

[@bigbrother1059]

Thanks for visiting my channel.

[@bigbrother1059]

Close to the heater is a thermal fuse hidden in a tube. It doesn't heat up when it's disconnected.

[@HaveYouMetTed]

my switch light lights up but its not heating up, how do i fix it thank you

[@bigbrother1059]

It is very likely that the thermal fuse is blown. If you look closely, the thermal fuse is hidden inside the heat-resistant tube in the wire. If you are an electrician or are interested in troubleshooting, you will need to purchase a thermal fuse of the same size and also need a crimping terminal. Even if the cause of the failure is known, it can be repaired if there are spare parts and a tool such as a crimping machine that can replace the defective part.

[@aviisahuu]

Auto cut off kaise bnd kre

[@passerbyjohn]

Hi, where and what type of thermistor do i need to buy for this? Or how many amp for the fuse?

[@bigbrother1059]

Hi, cool guy, this is a thermal fuse. Its standard is 150 degrees Celsius, 10A current capacity, and 250V AC MAX.

[@bigbrother1059]

www.ermec.com/limitor/catalogo/DF_englisch.pdf

[@mariajinkynicdao7171]

Kua sna po may audible explanation po kau s kung ano ang ginagwa nyo,,,nahirapan po unawain ng kagaya q n gustong matuto😅

[@bigbrother1059]

You can find out by checking the video description. I'm a beginner KZbinr, so I'm a little awkward. If you have any questions, please contact me and I will answer your questions. It may also be helpful to read posts from other subscribers. Sorry and thank you for not explaining.

[@mariajinkynicdao7171]

Salamat po

[@mosharefhossain5840]

Sound no y

[@lovebleblance8762]

Boss Anu po tawag sa bilog na tenesteran nyo po

[@bigbrother1059]

Salamat sa pagbisita sa akong channel. Gikuha nako ang akong ngalan gikan sa trabaho ni George Orwell 1984. Interesado ako sa mga hilisgutan sa electrical ug electronic circuit. Palihug ipahibalo kanamo ang bahin sa usa ka hilisgutan nga interesado ka ug kami mag-research niini.

[@cataleya6581]

The heating not working..how to repair ?

[@bigbrother1059]

If you are an electrical engineer or have enough knowledge about electricity, give it a try. However, you should be very careful with this as there is a risk of electric shock. Step 1. Remove the power plug. Step 2. Remove the screws on the bottom or top. Step 3. Conduct a continuity test to see if the power line is disconnected. Step 4. Most failures are due to a blown thermal fuse. Step 5. Even if the cause of the failure is known, it cannot be repaired if there are no replacement parts. Purchase parts that meet the applicable standards and replace them with defective parts. Again, the necessary tools must have a crimping machine and a crimping terminal. If you have any other questions, I can ask you.

[@cataleya6581]

@@bigbrother1059 but mine is imarflex multi hot pot (the heating suddenly didn't working just last night)..still can repair ? Tks

[@bigbrother1059]

@@cataleya6581 It's mostly if there are no breaks in the internal wiring Find the hidden thermal fuse. It is hidden in a white or black heat-resistant tube. Also, since it is in close contact with the heater, you feel something heavy when you touch the tube. I would like to deliver a thermal fuse or repair the unit if you are nearby. However, the area where you live and mine is very far away. If there is nothing wrong with the other parts (for example, check whether the wire is broken or the connecting screw is loose), you can order a thermal fuse of the same size online.

[@user-tf6zl6vj1w]

온도휴즈 불량 최고

[@bigbrother1059]

온도퓨즈 필요하면 몇개 드릴까요? 스펙은 150도 10A입니다

[@mosharefhossain5840]

Sound no come

[@bigbrother1059]

Thank you for visiting my channel.

[@deshbhaktdeshwasi2975]

Useless and time wasting clip. No Commentry. No one can understand what u did to steam cooker. It seems that u only understood problem and u yourself solved it. Whole process gone above heads of viewers.

[@bigbrother1059]

Thank you for visiting my channel. I will take your comments into account when creating the video.

[@deshbhaktdeshwasi2975]

@@bigbrother1059 Thanks for considering my comment. In your next video, plz explain what u r doing, what and how u r repairing , so that viewers can understand well. Any way thanks again. Jai hind.

[@gushardy4421]

Do you have whatsapp? i need help with my multicooker.

[@bigbrother1059]

nice to meet you I don't use whatsapp. Please elaborate on what you need. Then we can help you. Or give us your email.

[@gushardy4421]

@@bigbrother1059 I have a USA 110v multicooker. I want to convert to 220v to use in another country. Will that fuse work?

[@bigbrother1059]

@@gushardy4421 Yes, you can use the same fuse capacity of the existing multicook. The fuse will work just fine.

[@gushardy4421]

@@bigbrother1059 What exactly do i need to change to convert to 220v?

[@bigbrother1059]

@@gushardy4421 It needs a transformer to drop the voltage from 220V to 110V. Since the power socket is different for each country, the power connector used in that area is required.