DIY EURORACK CMOS ADSR

DIY EURORACK MODULE
THOMAS HENRY CMOS ADSR
For more information: www.slowroom.be/2021/12/thoma...
00:00 making noise
02:46 working on faceplate
03:38 preparing stripboards
04:44 building module
07:56 wiring
12:00 finishing up
12:21 testing module
#diyeurorack, #cmosadsr

[@Sarahbuildsstepsequencers]

Beautiful session!

[@beatrute2677]

Nice work mate.

[@SLOWROOMNOISE]

Thanks alot!

[@maxfilmstudios225]

Great! I had a look on your pcb drawing. what is the matter of the second flag of the jacks trigger in and gate in? so th "G" and the "+12V". are these stereo jacks?

[@SLOWROOMNOISE]

First off sorry for the lack of information. It looks like stereo jack but it’s a mono 3.5mm jack which has three pins such as Tip, Sleeve and Switch. As you know, Switch pin is normalled to Tip pin. So you can just connect “G” and “+12v” to each Switch pins. Hope it helps!

[@maxfilmstudios225]

@@SLOWROOMNOISE Got it. i didn't know that there are jacks with switches. Cool

[@chsm72]

May I ask about your soldering iron and solder you use?

[@SLOWROOMNOISE]

Yes, why not? I’m using Hakko FX-600 and Kester Sn60Pb40 (0.6mm). Hope it helps!

[@chsm72]

@@SLOWROOMNOISE thank you

[@SLOWROOMNOISE]

@@chsm72 no problem!