Thanks! Bria is a Australian Cattle Dog or Blue Heeler. Still a puppy 🐶
@fast79z28camaro Жыл бұрын
We just had to rehome an Australian cattle dog that looked very similar before the birth of our daughter. Awesome dogs. Nice work on the delete kit too!
@RiteonJohn3 жыл бұрын
Wow, nice nice transformation!!
@MeatballRebel3 жыл бұрын
Thanks! I am just starting the transformation 👍😎
@RiteonJohn3 жыл бұрын
@@MeatballRebel why you in the snow, you move?
@MeatballRebel3 жыл бұрын
Yup, moved to Sonora. Now I have a garage to work on my bikes and mountains to ride in 😎
@RiteonJohn3 жыл бұрын
@@MeatballRebel congratulations brother!
@MeatballRebel3 жыл бұрын
Thank you brother 😎
@allancooper38652 жыл бұрын
The Sickness tho’ , that Iil bobber’s customization is a one of a kind ! great content and the work you’ve done on your bobber is insane and inspiring for me to get my own pretty soon !!! Thank you 🙏 for sharing!!!
@MeatballRebel2 жыл бұрын
Thanks! I just wanted it unique so I just did it. Get one, you will not regret it!
@TheBeardedBobber3 жыл бұрын
That looks so good brother! Can’t wait to see what you have next
@MeatballRebel3 жыл бұрын
Thanks brother! Looking forward to see what you have done to your Bobber 🤘😎
@simonkennedy61162 жыл бұрын
Dude, you're doing exactly what I want to do with my Scout
@MeatballRebel2 жыл бұрын
Nice, you will like it when you finish. 🤘
@NorCal-refrigeration3 жыл бұрын
Good job meatball came out nice!!🤘⚡️🤘
@MeatballRebel3 жыл бұрын
Thanks! Also thanks for the shot of me riding past you on the way to Sturgis, fit in well in the new intro 🤘
@whiskeyshikesbikes61503 жыл бұрын
Great Vid bud! And and your ACD behavior reminds me of mine haha
@MeatballRebel3 жыл бұрын
Thanks! Yup, she keeps me on my toes 😎
@whiskeyshikesbikes61503 жыл бұрын
Got them raptor teeth!!!
@MeatballRebel3 жыл бұрын
🤣🤣🤣🤷♂️
@briandrake4963 жыл бұрын
That’s big boy mods 😎👍
@MeatballRebel3 жыл бұрын
Thanks! Just doing it my way and learning as I go 🤘😎
@daoudmh13 жыл бұрын
Nice work!!
@MeatballRebel3 жыл бұрын
Thanks 🤘😎
@mrloza12532 жыл бұрын
It look awesome, great job. I was wonderimg how thick is that aluminum plate that you used?
@MeatballRebel2 жыл бұрын
Thanks! I made the plate out of 1/4" 6061 aluminum.
@mrloza12532 жыл бұрын
@@MeatballRebel right on, thank you
@BrandonBicasso3 жыл бұрын
Damn! That's was so nicely done! I need to start soldering my wires 😂👌🏾
@MeatballRebel3 жыл бұрын
Thanks Brandon! Now I am wondering how you connect your wires 😉😝
@jay_fast3 жыл бұрын
Looks awesome!
@MeatballRebel3 жыл бұрын
Thanks Jay 🤘😎
@fishballx83 жыл бұрын
Awesome work. Is there a way you have an extra close off you would sell ? Interested in one , especially when some one from overseas selling it for an arm and a leg 😂
@MeatballRebel3 жыл бұрын
Sorry I only made one and I did keep my arm and leg 😝 You can check the close off plate at motherroadcustoms.com/collections/indian-scout-bobber-2015-2021/products/copy-of-2015-2020-indian-scout-bobber-rigid-solo-seat-mounting-conversion-kit-bolt-on to see if that works for you ( works with their seats) ans tell them Meatball Rebel sent you 🤘😎
@fishballx83 жыл бұрын
@@MeatballRebel thank you for the link
@AndyTaylorprinter3 жыл бұрын
As ever excellent video cheers Mr Meatball.
@MeatballRebel3 жыл бұрын
Thanks 🤘😎
@FNGMOTO3 жыл бұрын
Dude thats impressive work, nicely done. So if I want to replace my rear turn signals they need to have 3 wires?
@MeatballRebel3 жыл бұрын
Thanks! You can use two wire tail lights but, have to use a RUN/BRAKE/TURN signal LED converter like Joker Machine sells. The 3 wire lights made it easier for me, just had to figure how to connect them.
@FNGMOTO3 жыл бұрын
@@MeatballRebel I’ll look at some 3 wire. That does seem like a lot less work
@MeatballRebel3 жыл бұрын
@@FNGMOTO Jay Fast has a video on wiring in 2 wire tail lights in case you find a set of 2 wires lights you really like.
@borkoniBG3 жыл бұрын
That piece, part of the battery, breaks on mine as well haha. Nice job sir Can I by any chance order from you that aluminum parts you made for your motorcycle, back piece to close batterie with turn signal holder as well?
@MeatballRebel3 жыл бұрын
Ya, it happens 🤣 Sorry I am not a shop and not setup to reproduce parts easily. Thanks for thinking those parts are nice enough to buy though 🤘😎
@bennoab7 ай бұрын
By any chance with the hole drilled into the top of the block-off plate? Would I be able to put my Corbin seat on there?
@jaysmith87128 ай бұрын
Would you be willing to share your template? Awesome idea
@CDLNEPA3 жыл бұрын
Great Work. 😎👍
@MeatballRebel3 жыл бұрын
Thanks! Looking forward to seeing some of your modifications on your Scout 👍
@kaylee-aasiahcowan3117 Жыл бұрын
You sell any of those brackets? Or have any templates I can buy?
@MeatballRebel Жыл бұрын
Thanks but, these are one off custom parts that I don’t sell copies or templates of.
@travisking12233 жыл бұрын
Do you guys still have the rear sub frame that was removed? I need to purchase one.
@MeatballRebel3 жыл бұрын
I am keeping all spares parts in case I want to revert back someday.
@reubenhuntington65372 жыл бұрын
What type of tires are you running and what size?
@MeatballRebel2 жыл бұрын
They are commander 3 tires, front is a 130/70/18 and the rear is a 180/65/16.
@Same4Ever182 жыл бұрын
Would really help to know the dimensions of that back plate
@MeatballRebel2 жыл бұрын
Remove the rear fender support and trace it to make a template. The finished size is aprox 7 9/16" x 9" so you will need a large piece especially if you double it up at the top for the MotherRoad seat bracket.
@elfamosin2 жыл бұрын
Hello, where did you get that license plate?
@MeatballRebel Жыл бұрын
Search for "Accutronix Side Mount License Plate For Indian Scout 2015-2022". I got mine from Revzilla.
@MrJoeylap3 жыл бұрын
Noice!
@MeatballRebel3 жыл бұрын
Thanks! This is just the start of the modifications.
@MrJoeylap3 жыл бұрын
@@MeatballRebel with no rear fender aren’t you worried about road schmutz?
@MeatballRebel3 жыл бұрын
The stock fender does not stop all the road schmutz so kind of used to it. Guess I will have skunk stripe sometimes 😝