DIY for Beginners - GAP FIX - Real Carbon Fiber - Tesla

Excellent Carbon Fiber Spoiler from Tslaucay! Thorough install instructions and I show how to fix any install issues. Model 3 or Model Y, Gloss or Matte.
Permatex 81158 Black Silicone Adhesive Sealant - amzn.to/3WMyzvJ
TSLAUCAY Tesla Model 3/Y Spoiler Gloss or Matte - amzn.to/3j6rIxO
TSLAUCAY Carbon Fiber Tesla Model 3/Y Mirror Caps Gloss or Matte - amzn.to/3kImSaa
TSLAUCAY Carbon Fiber Tesla Model 3/Y Door Handle Covers Gloss or Matte - amzn.to/3JcnBdY
TSLAUCAY Carbon Fiber Tesla Model 3/Y Side Camera Cover - amzn.to/3R6pxqD
0:00 - Intro
1:11 - Unboxing
2:13 - Thorough Install - Many Tips
14:12 - First signs of gaps and trying to remove
15:53 - Taping down
18:50 - Yes, we have gaps
19:37 - How to Fix the Gaps
21:15 - Fixing the gaps
24:00 - Fixed!
24:24 - Before/After Pics
24:43 - Outro
Use “TeslaMark10” to save 10% from Halo BLK. (haloblk.com/?ref=pvwk5c3C)
Use 'TeslaMark' to save 15-30% on ALL Hansshow PRODUCTS!! (www.hautopart.com)
My current low budget camera setup (Amzn affiliate links):
GoPro 10 - amzn.to/3euGStT
GoPro Windscreen - amzn.to/3WpbX3E
Hero 9/10 Batteries 3-Pack and 3-Channel USB Charger - amzn.to/3Rt5jGX
DJI OM 5 Smartphone Gimbal Stabilizer - amzn.to/3zFvCTn
Video Lighting - amzn.to/3LeFtEl
256GB SAMSUNG EVO Select Micro SD - amzn.to/3Bq521B
Smatree Double Suction Cup Mount, Car Mount - amzn.to/3Ryw4cU
Joby JB01507 GorillaPod 3K Kit - amzn.to/3DbkKiH
Tesla 3 Mud Flaps - amzn.to/3TUSc2L
Tesla EPAuto Cabin Air Filter - amzn.to/3B1L2Bh
Tesla Logo LEDs - amzn.to/3QvToXx
OBDLink LX OBD2 Bluetooth Scanner - amzn.to/3xbo6OR
Tesla Glove Box Organizer - amzn.to/3L2RqwM
VViViD+ Matte Metallic Black Vinyl Wrap - amzn.to/3xG8fYT
Vinyl Wrap Tools Kit - amzn.to/3UrWe2T
3M Knifeless Finish Line Vinyl Wrap Cutting Tape - amzn.to/3BVShw2
Garage Heater - amzn.to/3Qsrw6n
Eaton WD1232 30-Amp 2-Pole 3-Wire 240-Volt Surface Mount Power Receptacle - amzn.to/3RqzKxg
Nema 14-50P Power Plug Connector - 4-Prong 50A 125/250V Straight Blade Plug - amzn.to/3d0eC1W
1 FT 30 AMP Heavy Duty NEMA L14-30P Plug to 14-50R Receptacle Adapter Cord for TESLA - amzn.to/3Br4Jnf
Light - Chill Ambient Music By Idyllic
IG - @teslammark
TikTok - @mmarktesla
Twitter - @mmyers300

[@vdubskiee5356]

not enough vids of the gap issues and how to fix it lol i had to do the same thing with my pricey spoiler from a reputable company.

[@FUNK_DAS_ANTIGAS]

I bought it through amazon, and the delivery takes 90 days. pathetic. Thanks for the video! the best so far.

[@mmark300]

Thanks. 90 Days! Wow, that is a long time. Now that I think about it, a few places have been telling me that their carbon fiber stuff is very delayed, so I think it's an issue for many.

[@stuntdrag0n]

I just did this with Permatex 81158 for a small lifted area on my spoiler of my Supra. It looks super good. I removed the tape probably around 15 minutes, and it was still in its liquid phase as in this video. And boy was it messy. At that point, I wanted to have a cleaner line and I wanted the finish line to sit more underneath the spoiler, but anything I did at this point was smearing it like shown in the video. I think it's better to sit and wait until it reaches the rubber phase for cleanup. It's pretty spot on about the timing at the 45 minute to 1 hour mark when it gets to be more rubbery in consistency. That's when I did the best cleanup. I used a small cup of water and dipped a glove-wrapped plastic trim remover (best not to use metal because it'll scratch your paint) and started pushing the edges of the silicone to a straight line. This will leave small smear marks, but it's way easier to clean up at the rubber phase, which I use alcohol pads to help wipe, and still at this point it wipes smeared silicone very easily.

[@mmark300]

Thanks for sharing. This stuff is so messy...

[@klebberbezerra1610]

the gaps are cause by the thickness of the TAPE. You did everything PERFECTLY. Extremely attached to details. So no matter what you do there is always gonna be gaps. it is because the tape, if you stretch it even a little it will be thinner in some parts than others.. Great video. thank you

[@mmark300]

Thanks! I just put another one (nice one from halo blk) on a friend's car and I was thinking the same - gaps are from the tape... Stay tuned if you want to see that video

[@liudom87]

Damn, watching about 100 videos, this one actually menations sealant... something different! Ordered one now for my spoiler! Thanks bro

[@mmark300]

Cool - Thanks for watching and your comment!

[@s4alexis]

With that VNH, its best to install how you did, but one change. As you pull back the red tape, dont pull it all the way off, as you pull it off in sections, hold down that section for like 30+ seconds for the initial adhesion. That is important. Thats why it kept popping in certain sections. Have installed the same one on several cars.

[@mmark300]

Thanks for the advice. After thinking about it more, it seems like it would be better to cut the red backing in the center of the wing, then start pulling some off in both directions, little by little and then applying pressure like you say. I didn't like starting on one side as it seems easy to get a bit off track as you go and then it just gets worse as you get to the other side. Have you noticed gaps on all cars? The same brand spoiler?

[@s4alexis]

@@mmark300 I installed the same one twice.... once actually from the middle, but it was easier to go from one side.

[@esayed]

Very useful, Thank you.

[@mmark300]

Thanks for watching!

[@RawTheMonstR]

About to try this for my rear diffuser. Wouldn’t clear silicone be easier considering it would be more “hidden”. Seems like it’ll be a cleaner job when trying to get all the extra off your car

[@mmark300]

Yeah, maybe, but clear doesn't hide the gap as well. And if you leave any on the car it won't look good later anyway as I think it may start looking dirty.

[@rogerserafin]

Perfect video. I just got a carbon wing also and this will help with the aid of installing it. Thank you so much. Love the attention to detail. SUBBED with the bell !!

[@mmark300]

Thank You!

[@rogerserafin]

@@mmark300 : Watching you apply the black sealant reminds me of watching Akira Nakai working on doing his wide fenders on Porsches. I'm in the process of shooting clear for a raw finish carbon fiber wing for a Tesla M3. Fitment is spot on, but I know even with the thin 3M tape I just purchased, it's gonna cause some gapping issues. I'm most likely will do the black sealant as well on my new blue M3.

[@mmark300]

@rogerserafin Well I'll take that as a compliment! Don't use tape that is too thin as it needs to soak up the small imperfections. And then the amount of gap will also depend on how close you put the tape to the edge of the wing. But yeah, I don't see how to put it on without gap.

[@toddshreve]

Much higher quality! Now I can actually see the gaps ;)

[@J-J-TL]

I saw a video of someone who used painter tape to and taped long the tail lights to draw an imagine line, hence to help with the alignment.

[@yusufs.3797]

If this may help i can give my contribution to this video. I had this issue as well. They provided another set of glue or whatever you call it. First time i installed it it fell off on the right side. Second time, i removed the glue and put the glue myself, ON THE EDGE and all the way to the corner edges' as well. Guess what ? It matches perfectly. I guess you have to put extra time to make it perfect. Hope this helps ;)

[@corsair666]

Black silicone seal awesome

[@markfitzgerald7556]

I too have installed my spoiler this way (3 bloody times now), I have replaced the 3m tape every time and everytime the car sits out in the sun the middle lifts up (gaps on the top of the trunk), I think we are putting these on in the incorrect place with regard to how far (the distance) from the top edge of the trunk to the edge of the spoiler is, I think I will measure where the spoiler is now and increase the distance (if you can imagine rolling the spoiler down the trunk lid more) that way I think I will gain my surface area on the top tape piece, if you look at Model y teslas with these spoilers they appear to almost follow or become an extension of the trunk line when you look at them from side on. I agree with your silicone soulition as well

[@mmark300]

Wow, 3 times! I haven't put one on the model y yet, but I'm thinking if it's popping up on the top edge, you may be pushing it down too far on the install. So pushing it towards the bumper. Maybe?? In the next month I'll be putting one on a model Y, so I'll find out...

[@rkgsd]

One common issue is the adhesion on the pointed ends loosening up. There isn't a lot of surface area for tape on the ends.

[@stiben718]

I am having the same issue after installing an oem performance spoiler on my LRMY 😅 This must be a common occurrence for us diy’ers 😩 As you mentioned though, all the other spoiler install videos don’t mention this “gap” issue after their install. Thanks for shedding light on this! I will need to do silicone as well. Just not sure if I am going to go clear..or black.

[@mmark300]

Thanks for watching! I picture clear looking more dirty after a while and I didn't think it would cover up the gaps, so wouldn't really look as good.

[@stiben718]

@@mmark300 great points, black it is! Btw what is the function of the weeping holes in the spoiler. Forgot whether I covered them when I applied the 3M tape. The spoiler is already on the car. 😫

[@mmark300]

@@stiben718 I'm really not positive what the exact purpose of weeping holes are in carbon fiber are, but I know they are needed in other areas, like construction, to allow water to weep out of things like concrete. Maybe moisture build up, maybe epoxy weep - not sure, I couldn't easily find out why... Let me know if your spoiler explodes 🤯😆

[@stiben718]

@@mmark300 lol 😂 I will keep you posted!

[@DiamondHead2010]

Great tip on the gaps, thanks! Thinking if I could use plasti dip to create a block that would also be easy to remove.. 🤔

[@mmark300]

Not a bad idea

[@MR2TCole]

Great idea for sealing the gaps in the spoiler. I'm a bit concerned about using silicone sealant on the car surface though. Hopefully no issues if you ever have to remove it or water getting trapped in there. Things like that.

[@mmark300]

Thanks and silicone will not harm the paint surface. More water and dirt will get trapped in there if the gaps are not sealed. Also, if the tape and install were perfect, the tape would seal it all up anyway...

[@WaveyLivy]

@@mmark300how do you know? Have you used it before on paint?

[@yiyangchen1102]

hi man very useful video！ appreciate it, just have one question, will Silicone damage the car paint?😊

[@mmark300]

@@yiyangchen1102 Thanks! No damage, paint is fine with silicone

[@DIYglenn]

I believe the best way is to split the tape backing in the center, and start peeling from the middle, working outwards on each side.

[@mmark300]

I think so also, but read the comments from Alex Moreno and myself below.

[@DIYglenn]

@@mmark300 But what was the issues with doing it that way? Surely getting it to stick with 15-20cm in the middle, then working outwards should avoid any gaps?

[@mmark300]

​@@DIYglennI really don't know why starting in the middle wouldn't be better. I'm going to put another one on a friend's car today, so I'll see how it goes starting from the center.

[@nyczyang27]

Good Install. I just ordered my spoiler. After watching like 15 videos of installations, I think the trick is only peel the top tape first, then apply heavy downward pressure. Once that's done, peel the bottom tape then apply lateral pressure. What do you think?

[@mmark300]

Thanks. I'm not sure if you put the top tape down that you'll be able to pull the red backing off of the bottom tape. Not positive about that though... Read the Alex Moreno comment and my reply below for more ideas. Then, in another video of mine (mirror caps, I think), someone said that you can use an alcohol and water solution to keep the tape mobile (not sticking too hard) until you get it in place. Once it dries the tape will supposedly stick just as hard. I've never seen nor heard of this before but I want to try it out on something...

[@TheRichierich1984]

I would of done same thing for gaps. May have tried just a clear. A little dish soap n water in a spray bottle makes silicon easy to work with

[@mmark300]

Thanks, never heard of that!

[@firstimpression6746]

After 11 months of installation, any issues pops up regarding peeling of the sealant/ peeling of the carbon fibre surface etc. ? Many thanks on a well thought out video.

[@mmark300]

Thanks! No, no issues AT ALL.

[@kphaboutdy]

How’s the spoiler after all these months? I did exactly like what your did with the black silicon and it looks much better. I used the 3M clear VHB which I feel is more sticker than the black foam.

[@mmark300]

Cool, mine still looks great!

[@dsse6571]

Will the color match?

[@ginnodecastro4489]

Thanks for this video, Can you do a video where you're removing the black silicone sealant off of the spoiler and the car completely? i just want to see if there's really no damage beneath the spoiler. What chemical or method would you use to get it off?

[@mmark300]

Thanks for watching! There is no issue with silicone and car paint. It can be taken off with diluted alcohol, goo gone, wd40.

[@ginnodecastro4489]

@@mmark300 thank you, last silly question, there's a bunch of them Silicone sealants out there. Is there a brand name maybe number specific product that you would recommend to seal the gaps on the spoiler for the car, like the Permatex blk 59203 vs Permatex blk 81158 vs JB Weld blk 31319, or as just as long as it's a silicone sealant it should be good? I had my MY whole body PPF'd and the technician who did it says, the PPF should be able to hold the Spoiler on top of the PPF.

[@mmark300]

@@ginnodecastro4489 Sorry, I don't really know if one brand is significantly better than another.

[@_itsvini]

is this stuff removable down the line if i want to remove my spoiler?

[@mmark300]

Yep, should not be a problem.

[@Patriot3]

Propably real carbon fiber in polyester resin. In the sunshine after a year or two I'll guess it will peel a top layer of clear off.

[@mmark300]

Hope not...

[@vash0007]

Is this the glossy or matte?

[@mmark300]

Glossy

[@velocity4260]

The tape that comes with the spoiler is straight trash went to auto zone picked up some 3m vehicles moldings/trim tape and that shit is not going anywhere

[@mmark300]

@@velocity4260 Some come with 3M VHB, which I think is the best.

[@alciaran]

I will use T-7000 the glue used in mobiles phones instead of silicone to fill the gaps. Lets see

[@mmark300]

Oh, do you know how that glue works with the paint? Will it come off without damage?

[@alciaran]

@@mmark300 No, but if it is safe with the mobile paint ...I will take the risk :)

[@Sayres434]

What about velcro ha

[@mmark300]

Believe it or not, I would be really interested to see how well velcro would work - there is some SUPER strong velcro out there. 😀