DIY FRONT LOADER is WORKING!?

Check Out our Hoodies and T-Shirts: farmily.lv/shop
Make sure you subscribe to follow our daily lives in this farm!
Hey to everyone!!
We are two young adults, Despina 24 and Deivids 25 renovating an old farm house from 1817 in Latvia.
Everything in and out of our house has been done by ourselves with no hired help.
DIY is going to apply to nearly everything in our house. Our budget is tight and that has made us appreciate every “ugly” part of this house and turn it into something new and beautiful.
We give new life to things that others would throw away!
In this journey we are not alone! We are starting up our little Farmily:
7 Goats & 2 Bucks
3 Sheep
4 chickens & 3 Chicks
1 Rooster
and 3 Geese
Oh yeah and our cat Ivi & Dog Keita
Despite our daily problems we are two young people full of joy and happiness, ready to start a new crazy chapter in our life. It wouldn’t be fair to keep this fun just for us!
That’s why we want YOU to also be part of our Farmily!!
We love our very supportive community!!
Thank you so much for the support you are giving us. Every view, like, share, subscribe and financial support means a lot to us. Any support is extremely appreciated!
DONATE:
If you want to support our crazy projects (PAYPAL)
bit.ly/2x0qE6p
Become a member to gain access to exclusive content:
/ @dobediff
Support us on Patreon:
/ dobediff
Patreon Let's you support us financially every month with your desired amount.
Our Instagram:
/ dobediff

[@gryphc3860]

What is so cool about this project is watching you thriving, Deivid. You are creating and learning as you go, and the joy this brings you is obvious. Bravo! 🎉🙏💚

[@connieohara7301]

What amazes me is the hydraulics you made. If I hadn't seen it I wouldn't have believed it.

[@annettegreer2425]

Experience is the best teacher and your are learning. Design includes so much more knowledge than most people realize related to forces and weight/counter weight. These lessons you will never forget.

[@firstname6826]

Despina the welder!!

[@ronnieroberts7189]

Love your enthusiastic commitment to building these invaluable homesteading tools.

[@brendaprovence1750]

I swear you can make anything work you’re a genius

[@Timhey0912]

Deivid...........you blow my MIND!!! You can make anything!!!! Yes I agree with Gryph C, it's great watching you THRIVING!!!!!😄🥳❤

[@yrukind]

All the fervor of a mad scientists in their lab, but instead we get a happy genius design engineer and the muse of a sweet and talented cinematographer in the workshop. Thank you again for another excellent video.

[@klazyy641]

You need "outriggers" (like on the South Seas canoes with the 'wings' to stabilize the narrow boat} to keep you upright. Well, those and more meals to add weight, lol.

[@johnschultz7268]

Add 2 more tires on the back and fill them with calcium.

[@timd5343]

the fun is in the building enjoy thnx

[@MrSpinnerbug]

Very good DAVID!😊

[@vickismallwood2082]

You could weld some little spikes on the back wheels and use lifting weights to put on the spikes.? Just a thought.

[@Aphidman1]

When the machine is done, you should make a playlist we can share around!

[@RedStorm.]

Artful photography and editing. Very nice indeed.

[@margaretspignardo5588]

Deivid, you are amazing!

[@MrHuismeester]

David the Metal and Welding Master !!!!! Nice Job !!

[@cicikids3035]

You are a Jack of all trades ❤

[@davidstoddard9160]

Having a front end loader with bucket and graffel fork for your farm tractor would have served your needs a lot more, and especially in the winter time when you need something that will drive in deeper snow.

[@DoBeDiff]

Definitely useful but a lot bigger and more expensive. Plus I want something for small jobs first can't use the big tractor for everything. But I plan to build one for the big tractor just need to learn and understand how to do it! 😁

[@carolidol3375]

Bigger axel to spread tires in the back to help stable

[@donnajacobs4492]

What about adding a roll bar for safety and extra weight?

[@DoBeDiff]

It would be useful for safety but then the centre of gravity is getting even higher making it more likely to fall. And if it falls I can jump out it's better to have no obstructions so I can get out fast. I haven't fallen yet and have made many improvements for stability! 😁

[@MBW4449]

The higher you lift the load the more counter weight you need. Don't lift the weight any higher than you must.

[@RedStorm.]

Absolutely cool thing you made.

[@sharonanderson346]

The two of you are so inventive! Great job!

[@christopherdriver8628]

Brilliant job

[@kerryscott2552]

kerry put duels on the back will help side sway

[@YamIa3gypsy]

Talking about babies now? Exciting times for you both!

[@ladyofquills]

Wonderful job with the editing, particularly the sound editing here!! :)

[@picklesgherkin]

6:39 MAMA ..☺

[@2horns8myhalo]

FrankenTiller 🤘

[@Dustmadeout]

Cool machine, but you should start with the porch.

[@willlowz]

Ok lol you are totally amazing 🤩

[@PeggyAmaya]

weight can be added to the big rear wheels. It might be more stable. Dual wheels would give more side to side balance. Your projects are very fun.

[@kathleensmith3555]

Lol the first vehicle I ever drove was a doodlebug! -- It was a old blue car cut in half and made into a truck with a wooden truck bed to haul stuff around the farm -- I dont remember if Dad sold it or scrapped it but I do think he might have swapped it for a crank start Farmall Tractor we used

[@MBW4449]

You need counter weights in the back when you lift.

[@mikewilliams2072]

Need to make some wheel spacers to give it a wider stance for stability!

[@mickeandersson6777]

You got skills Devid! 👍👍

[@betsyb.1619]

You have many impressive skills. Cya next one

[@trebor56]

very cool DIY Loader, well done

[@donaldbassett8769]

no no comment you make a good toy designer 😫😫😫😫😫😫

[@debbiewilliams7176]

Love your projects love your attitude at making things

[@cece624]

Despina, your cinematography skills and music selections are spectacular!

[@lyndaf.6329]

It's refreshing to see two young people working hard to create a wonderful life together, I've watched you from the beginning and what you have achieved up to now is amazing. Although the tractor build is not my thing I'm amazed at your skills and talent Deivid. I wish you both lots of happiness and good health 🥰

[@shortlines]

So, turn it into a power wheelbarrow by adding the tilt bucket over the front wheels remove the lift

[@jackiehutton1023]

Your so good

[@dianearmoogan3326]

Deivid, you get better and better with everything you make from scratch.

[@izzygirl9591]

You can fill the ties easily. Buy a bag of calcium chloride and mix the whole bag in 45 gallons of water. Make a fitting for the side a the barrel, roll your valve stem to the top and remove the valve core. Hook the hose from the barrel to the valve stem. (You'll have to remove the hose from the stem periodically to let air out. This should fill up the tire to the stem. The rest of the room is for air. Then air it back up. The barrel will have to be elevated above the tire to gravity feed in. The barrel full will be enough for both tires. GL. Looking good though.

[@DoBeDiff]

I have done this but only with water for now. Will remove it for winter! 😁

[@philbascombe6346]

@@DoBeDiff wind sheild washer fluid , winter type.

[@kastamD]

Cool build. Greetings from Estonia!

[@normundsrozenbergs4882]

Tas ir tikai normāli, ka ne viss izdodas pirmajā reizē. Krājas pieredze un katra nākošā reize būs labāka.👍

[@mikeunum]

Advise: your hydraulic system is to fast seen the moving. Place a limiter valve to get down the flow let say by 40%. Then the moving of the system would more smooth and more controllable.

[@samuelmorency-vallieres4314]

Traduire du texte avec votre appareil photo I like the way you work with what you have on hand , makes a change from other videos that all must always be perfect simple, effective and inexpensive!!

[@higheriam]

Might be time to take what you've learned and redesign from scratch. Instead of adding on. From the ground up. Wider , lower center of gravity, weight in the back, ect maybe more like a bobcat.

[@williamwhite-bh5vh]

fill the tires with calcium chloride. it wont freeze and will add weight.

[@miksveinbergs2604]

I hope you build a bigger one for T-40.

[@AllenGrant411]

This is really good editing, nice video bud 💯👌

[@kerryowen-holmes3719]

Are you still going to do work inside your house? Enjoy your machine & Drspina, Eva, doggie and other animals you have. Also say hello to the neighbours & their dog. Victoria Australia 🇦🇺

[@beverleybarnes5656]

Deivids' jeans are classic. They look as if they're stiff with oil and dust.

[@Lantanana]

I am so impressed with your builiding! Maybe you could add a wheel barrow type item to the back (on wheels so the axles aren't carrying) and put cement or cement blocks in that addition.

[@denises9426]

Great job Deivid! ⭐️⭐️⭐️⭐️⭐️

[@phillipdickinson8557]

Both worked great great idea you got a worker machine there keep up the good work David on a budget making great farm machines you should make a few and sell them to all your neighbors call it your wives tractor or helping adds ten hands to the job

[@davidstoddard9160]

Name for the loader maybe thinking the famous dam buster which was a great story where they used the barrel bombs that skipped over the water until they hit the dam required low level flights to release the barrel bombs

[@MINItraktor196]

Помощник 😎👍

[@geli2859]

❤❤❤❤❤❤❤

[@oldthudman]

Your rear track needs to be wider for more stability....................

[@SakellarisNikolaos]

Nice work 👌👌

[@barbaraslayden2277]

Never hurts to be creative, that's how we learn. Maybe put the weight in your seat area. Love from Virginia ❤️

[@karlbeckmann8865]

You can shorten the upper arms. Then your leverage would be better on the tractor-side.

[@davidstoddard9160]

For the tilt of the fork you need a hydrollic cylinder that extends further to be able tilt it both ways more.

[@DoBeDiff]

I fixed it! It was all about location of the connections now the bucket and the fork can go fully up and fully down! Also a lot of reinforcement was required since I broke it few times already! 😁

[@agatazawadzka6602]

🥇🥇🥇🏆🏆🏆❤️❤️❤️

[@minime7375]

Do you guys still have any time for your hobbies (video games, crafts and such)? You’re working so hard on the farm and for the videos too. PS maybe if the bucket arms would be a bit shorter?

[@tarinalavis5845]

Great job

[@gabrielebehr563]

Deivid‘s secret wappon👍

[@deannacalef3513]

Fill the back tires with water???

[@sharonlopez8291]

I wonder how much you can sell that for? You are both amazing!!!

[@stanhendrickson739]

Eh put wider axles on a thing to make it stable

[@coby6417]

🌟👍🍀💐

[@richardjones5255]

You are enjoying the project and learning, however, I suspect that the original tractors could benefit from some love and be more productive. I am concerned that it is hugely unstable and not really fit for hard work without too many risks to your health safety. Some similar machine had the driver sit right at the back in a sort of crude add on cage, sometimes just a cantilevered seat., the idea did not catch on. Clearly, the concept had noticeable limitations! As a hay much gatherer spreader, it appeared more successful,

[@jaanussaar9481]

Ma arvan, et sa oleks pidanud masti lühema tegema. Jõuõlg on liiga suur. Lühem mast oleks stabiilsem

[@geniestotz2240]

Really David is there anything you can’t do??

[@ernhau3937]

Spur Verbreiterung

[@richard51]

Maybe your lifting arms could be shortened

[@jamescarpio2636]

The arms are too far forward if you bring the weight closer to the body it would work better

[@michaeljrladouceur2881]

Take half of barel and put concrete in it

[@cliffordmcintire4312]

How the hell do you get two sets of eyebrows